kaidokert / rm32

61%

main: 63%

LAST BUILD ON BRANCH system-tick

branch: system-tick

CHANGE BRANCH

x

Reset

Sync Branches

• system-tick
• main
• pr1
• pr10_1
• pr11_1
• pr12_1
• pr13_1
• pr14_1
• pr15_1
• pr16_1
• pr17_1
• pr18_1
• pr19_1
• pr20_1
• pr21_1
• pr22_1
• pr23_1
• pr24_1
• pr25_1
• pr26_1
• pr27_1
• pr28_1
• pr29_1
• pr2_1
• pr2_2
• pr2_3
• pr2_4
• pr2_5
• pr2_6
• pr2_7
• pr2_ref
• pr30_1
• pr31_1
• pr32_1
• pr33_1
• pr34_1
• pr3_1
• pr5_1
• pr7_1
• pr8_1
• pr_codecov1
• pr_codecov2
• tmps

Build # 25174128750

Build Type

push

github

Committed by web-flow

Commit Message

Make harness test actual firmware code (#9)

* Make harness test actual firmware code

* Add startup duty clamping, prop brake ISR output, firmware current limit

Startup duty clamping: enforce min_startup/startup_max during low
zero-cross phase in ten_khz_tick. Prevents stall/overcurrent during
first commutations.

Proportional brake: ISR reads prop_brake_active from SharedComm and
applies drag brake duty when motor not running.

Firmware: set use_current_limit from EEPROM config after loading.

* Clear prop_brake on stuck rotor latch early return

The BEMF fault latch path returned early, skipping the prop_brake
publish at the bottom. ISR could see stale prop_brake_active and
apply brake duty instead of full stop on a stuck rotor.

Coverage Stats

583 of 1487 new or added lines in 8 files covered. (39.21%)

40 existing lines in 3 files now uncovered.

3215 of 5236 relevant lines covered (61.4%)

601.78 hits per line