35437047893

Committed 19 Sep 2026 10:18AM UTC coverage: 77.417%. Remained the same

Build # 35437047893

Build Type

push

github

Committed by

web-flow

Commit Message

Sentence case for the remaining Title Case strings (#1835)

* Sentence case for the remaining Title Case strings

Twenty-one strings still capitalised every word (Export Public Key,
Password Length:, OTP Code, Rename Folder To:, Search Password, ...) while
the rest of the interface uses sentence case, and each was its own string
to translate. lupdate turns a case change into a new empty message next to
the vanished one; since the translation of a re-cased English string is the
same translation, it is copied over (1489 messages in 64 files) with its
finished state intact, so Weblate has nothing new to review for this.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JuQsrHonihp1nARE7bzstc

* Carry over obsolete entries too, keep English identity translations in step

Review of the case pass: en_US and en_GB keep their predecessors as
type="obsolete" rather than "vanished", so their translations were not
copied, and a translation that only echoes the English source must follow
the source's new case instead of preserving the old one (else en_US would
still show "Export Public Key"). Also the help heading "Export Your Public
Key" that the first pass missed.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JuQsrHonihp1nARE7bzstc

* Redo the catalogs on a clean tree; re-case only English identity strings

The second lupdate ran after a build and picked up ui_*.h locations; the
catalogs are regenerated from a clean tree. The identity re-casing now
applies to en_US and en_GB only (a German "Version" is a translation, not
an echo of the source) and keeps en_GB's typographic ellipsis, so "Save
to File…" becomes "Save to file…".

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JuQsrHonihp1nARE7bzstc

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>

Coverage Stats

5 of 25 new or added lines in 7 files covered. (20.0%)

9 existing lines in 1 file now uncovered.

6647 of 8586 relevant lines covered (77.42%)

73.76 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

48.69

/src/mainwindow.cpp

// SPDX-FileCopyrightText: 2014 Anne Jan Brouwer
// SPDX-License-Identifier: GPL-3.0-or-later
#include "mainwindow.h"

#include "qtpasslogging.h"

#include "configdialog.h"
#include "enums.h"
#include "executor.h"
#include "exportpublickeydialog.h"
#include "filecontent.h"
#include "firstrunwizard.h"
#include "passworddialog.h"
#include "passworddisplaypanel.h"
#include "pathvalidator.h"
#include "processoutputpanel.h"
#include "qpushbuttonasqrcode.h"
#include "qpushbuttonshowpassword.h"
#include "qpushbuttonwithclipboard.h"
#include "qtpass.h"
#include "qtpasssettings.h"
#include "templateio.h"
#include "totp.h"
#include "trayicon.h"
#include "ui_mainwindow.h"
#include "usersdialog.h"
#include "util.h"
#include "windowstatestore.h"
#include <QApplication>
#include <QCloseEvent>
#include <QDate>
#include <QDesktopServices>
#include <QDialog>
#include <QDirIterator>
#include <QDockWidget>
#include <QFileInfo>
#include <QHBoxLayout>
#include <QInputDialog>
#include <QLabel>
#include <QLineEdit>
#include <QMenu>
#include <QMessageBox>
#include <QProgressDialog>
#include <QPushButton>
#include <QShortcut>
#include <QTextCharFormat>
#include <QTextStream>
#include <QTimer>
#include <QTreeWidget>
#include <QUrl>
#include <algorithm>
#include <utility>

/**
 * @brief MainWindow::MainWindow handles all of the main functionality and also
 * the main window.
 * @param searchText for searching from cli
 * @param parent pointer
 */
MainWindow::MainWindow(const QString &searchText, QWidget *parent)
    : QMainWindow(parent), ui(new Ui::MainWindow) {
#ifdef __APPLE__
  // extra treatment for mac os
  // see https://doc.qt.io/qt-6/qkeysequence.html#qt_set_sequence_auto_mnemonic
  qt_set_sequence_auto_mnemonic(true);
#endif
  ui->setupUi(this);

  m_qtPass = new QtPass(this);
  restoreWindow();
  connect(m_qtPass, &QtPass::outputReady, this,
          [this](const QString &html) { flashText(html, false, true); });
  connect(m_qtPass, &QtPass::operationFinished, this,
          [this]() { setUiElementsEnabled(true); });
  connect(m_qtPass, &QtPass::statusMessage, this,
          &MainWindow::showStatusMessage);
  connect(m_qtPass, &QtPass::pushRequested, this, &MainWindow::onPush);
  connect(m_qtPass, &QtPass::entryInserted, this,
          [this]() { on_treeView_clicked(getCurrentTreeViewIndex()); });
  connect(&m_qtPass->clipboard(), &ClipboardManager::statusMessage, this,
          [this](const QString &message) { showStatusMessage(message); });
  // Both backends: the active one can change through the configuration
  // dialog without a restart.
  connectPassSignals(QtPassSettings::getRealPass());
  connectPassSignals(QtPassSettings::getImitatePass());
  ImitatePass *ipass = QtPassSettings::getImitatePass();
  connect(ipass, &ImitatePass::startReencryptPath, this,
          &MainWindow::startReencryptPath);
  connect(ipass, &ImitatePass::reencryptProgress, this,
          &MainWindow::reencryptProgress);
  connect(ipass, &ImitatePass::endReencryptPath, this,
          &MainWindow::endReencryptPath);

  // register shortcut ctrl/cmd + C to copy the currently selected password
  new QShortcut(QKeySequence(QKeySequence::StandardKey::Copy), this, this,
                &MainWindow::copyPasswordFromTreeview);

  m_tree = new StoreTree(ui->treeView, this);
  m_tree->setStore(QtPassSettings::getPassStore(Util::findPasswordStore()));
  m_tree->setPass(QtPassSettings::getPass());
  connect(ui->treeView, &QWidget::customContextMenuRequested, this,
          &MainWindow::showContextMenu);
  connect(ui->treeView, &DeselectableTreeView::emptyClicked, this,
          &MainWindow::deselect);

  {
    const AppSettings s = QtPassSettings::load();
    if (s.useMonospace) {
      QFont monospace("Monospace");
      monospace.setStyleHint(QFont::Monospace);
      ui->textBrowser->setFont(monospace);
    }
    if (s.noLineWrapping) {
      ui->textBrowser->setLineWrapMode(QTextBrowser::NoWrap);
    }
    clearPanelTimer.setInterval(MS_PER_SECOND * s.autoclearPanelSeconds);
  }
  ui->textBrowser->setOpenExternalLinks(true);
  ui->textBrowser->setContextMenuPolicy(Qt::CustomContextMenu);
  connect(ui->textBrowser, &QWidget::customContextMenuRequested, this,
          &MainWindow::showBrowserContextMenu);

  updateProfileBox();

  m_displayPanel = new PasswordDisplayPanel(
      ui->gridLayout, ui->verticalLayoutPassword, this, this);
  connect(m_displayPanel, &PasswordDisplayPanel::copyRequested,
          &m_qtPass->clipboard(), &ClipboardManager::copyText);
  connect(m_displayPanel, &PasswordDisplayPanel::qrRequested, m_qtPass,
          &QtPass::showTextAsQRCode);
  // Double-click on what is shown edits it, as in the tree.
  connect(m_displayPanel, &PasswordDisplayPanel::editRequested, this, [this] {
    if (ui->actionEdit->isEnabled()) {
      onEdit();
    }
  });

  QtPassSettings::getPass()->updateEnv();
  clearPanelTimer.setSingleShot(true);
  connect(&clearPanelTimer, &QTimer::timeout, this, [this]() { clearPanel(); });

  searchTimer.setInterval(350);
  searchTimer.setSingleShot(true);

  connect(&searchTimer, &QTimer::timeout, this, &MainWindow::onTimeoutSearch);

  // Install the search-box key filter once, not on every setUiElementsEnabled
  // call.
  ui->lineEdit->installEventFilter(this);
  ui->toolBar->installEventFilter(this);

  // Safety net: if a backend operation disables the UI but never signals
  // completion, re-enable after a timeout so the window can't get stuck.
  m_uiWatchdog.setSingleShot(true);
  m_uiWatchdog.setInterval(UiWatchdogMs);
  connect(&m_uiWatchdog, &QTimer::timeout, this, [this]() {
    showStatusMessage(tr("Operation timed out; re-enabling interface."));
    // Drop any in-flight OTP request so a late finishedShow cannot be mistaken
    // for the answer to it.
    cancelOtpRequest();
    setUiElementsEnabled(true);
  });

  initToolBarButtons();
  initStatusBar();
  m_processOutput = new ProcessOutputPanel(this);
  addDockWidget(Qt::BottomDockWidgetArea, m_processOutput);
  // setVisible after addDockWidget so our explicit preference wins even if
  // QMainWindow applies any cached state when the dock is attached.
  // restoreWindow() ran right after the QtPass construction above, so the
  // saved layout has already been processed.
  m_processOutput->setVisible(QtPassSettings::isShowProcessOutput());

  connect(QtPassSettings::getPass(), &Pass::finishedAnyWithPid, this,
          [this](const QString &out, const QString &err, Enums::PROCESS pid) {
            // Never route potentially-secret output through the panel:
            // - PASS_SHOW goes via a dedicated signal to
            //   the main text browser (which clears on a timer).
            // - PASS_GREP returns lines from password files; #252 must
            //   not leak those into a long-lived panel.
            // - PASS_INSERT's stdin is the password; stdout normally
            //   carries gpg/git progress only, but exclude defensively
            //   in case a future code path uses --echo or similar.
            if (ProcessOutputPanel::isSensitiveProcess(pid)) {
              return;
            }
            if (!out.isEmpty()) {
              onProcessOutput(out, false, pid);
            }
            if (!err.isEmpty()) {
              onProcessOutput(err, true, pid);
            }
          });

  ui->lineEdit->setClearButtonEnabled(true);
  updateGrepButtonVisibility();

  setUiElementsEnabled(true);

  ui->lineEdit->setText(searchText);

  // Record whether startup configuration succeeded instead of calling
  // QApplication::quit() here: quit() before the event loop runs (exec() is
  // still ahead in main()) is a documented no-op, so a cancelled first-run
  // wizard used to leave the half-configured window showing anyway. main()
  // consults initSucceeded() and exits before show() when this is false.
  m_qtPass->init();
  // Ask again until the configuration is usable or the user gives up. The
  // dialog's OK button is not gated on Util::configIsValid(), so an accepted
  // first-run configuration can still point at a store without a .gpg-id
  // (the user declined to create it); only a cancel ends the loop.
  while (!Util::configIsValid(QtPassSettings::load())) {
    if (!config()) {
      return;
    }
  }
  m_freshStart = false;
  m_initSucceeded = true;

  // Initial focus is handled in showEvent() once the window is actually
  // mapped. Scheduling it here via a 10 ms QTimer was racy: if the timer
  // fires while the window has not yet been realised — e.g. an
  // ActivationChange queued by main()'s `activateWindow()` call before
  // `show()`, or a nested QDialog::exec() inside init() — the
  // QLineEdit's internal text engine hasn't been wired up and
  // selectAll() segfaults inside Qt (see #1187, #1188).
}

MainWindow::~MainWindow() {
  // Quit from the tray menu or a SIGTERM never delivers closeEvent(); the
  // window still knows its last geometry here.
  saveWindowState();
  delete m_qtPass;
}

/**
 * @brief Connect the signals of one backend that the window answers itself:
 * decrypt results, errors, status text and the grep results.
 * @param pass The backend.
 */
void MainWindow::connectPassSignals(Pass *pass) {
  // A failed decrypt never emits finishedShow; drop the pending OTP/copy
  // request so a later decrypt of the same entry is not taken as its answer.
  connect(pass, &Pass::processErrorExit, this, &MainWindow::cancelOtpRequest);
  connect(pass, &Pass::critical, this, &MainWindow::critical);
  connect(pass, &Pass::startingExecuteWrapper, this,
          &MainWindow::executeWrapperStarted);
  connect(pass, &Pass::statusMsg, this, &MainWindow::showStatusMessage);
  connect(pass, &Pass::finishedShow, this, &MainWindow::passShowHandler);
  // Both check the file against their own pending request and ignore the
  // rest, so they can stay connected for good.
  connect(pass, &Pass::finishedShow, this, &MainWindow::otpFromFileToClipboard);
  connect(pass, &Pass::finishedShow, this,
          &MainWindow::passwordFromFileToClipboard);
  connect(pass, &Pass::finishedGrep, this, &MainWindow::onGrepFinished);
}

/**
 * @brief MainWindow::saveWindowState persist geometry and dock/toolbar
 *        layout. Idempotent, cheap, called from closeEvent() and the
 *        destructor.
 */
void MainWindow::saveWindowState() {
  QtPassSettings::setGeometry(saveGeometry());
  QtPassSettings::setSavestate(saveState());
}

/**
 * @brief MainWindow::focusInput selects any text (if applicable) in the search
 * box and sets focus to it. Allows for easy searching, called at application
 * start and when receiving empty message in MainWindow::messageAvailable when
 * compiled with SINGLE_APP=1 (default).
 */
void MainWindow::focusInput() {
  // Resolve the QLineEdit through the live widget tree rather than the
  // cached `ui->lineEdit` pointer.
  //
  // On a fresh-config first launch the constructor calls
  // `m_qtPass->init()` → `MainWindow::config()`, and `config()`'s
  // `applyWindowFlagsSettings()` does `setWindowFlags(...)` + `show()`
  // on the main window. `setWindowFlags` on a top-level widget rebuilds
  // the native window via `setParent(nullptr, flags)`; under Qt 6.11
  // we observed the QLineEdit attached to the centralWidget gets
  // destroyed in that rebuild while `ui->lineEdit` still holds its old
  // address — leading to a SIGSEGV inside `QWidget::testAttribute`
  // (called from `QLineEdit::isVisible` / `selectAll`). `findChild<>()`
  // walks the current hierarchy and returns null cleanly when the
  // widget is gone, so `focusInput` becomes a safe no-op instead of a
  // use-after-free.
  if (!isVisible()) {
    return;
  }
  auto *lineEdit = findChild<QLineEdit *>(QStringLiteral("lineEdit"));
  if (lineEdit == nullptr || !lineEdit->isVisible()) {
    return;
  }
  lineEdit->selectAll();
  lineEdit->setFocus();
  // Only mark the first-show focus pulse as done once it's actually
  // landed; setting it eagerly in showEvent() would consume the
  // one-shot if focusInput returned early (mid-rebuild widget state)
  // and we'd never retry.
  m_firstShowCompleted = true;
}

/**
 * @brief MainWindow::changeEvent sets focus to the search box on activation
 * and re-derives palette-dependent styling on a theme change.
 * @param event
 */
void MainWindow::changeEvent(QEvent *event) {
  QWidget::changeEvent(event);
  if (event->type() == QEvent::PaletteChange && m_displayPanel != nullptr) {
    // Desktop switched light/dark (e.g. KDE day/night). Top-level widgets
    // receive PaletteChange for that (ApplicationPaletteChange goes to the
    // QApplication object). Styling that bakes palette colours into
    // stylesheets must be re-derived by hand.
    m_displayPanel->refreshPalette();
  }
  if (event->type() == QEvent::ActivationChange && isActiveWindow() &&
      isVisible()) {
    // Defer one event-loop tick so the synchronous activation dispatch
    // chain (`QApplicationPrivate::setActiveWindow` → `notify_helper`)
    // unwinds before we touch widget state — calling `focusInput()`
    // inline from this stack has segfaulted in past iterations because
    // mid-rebuild ui state isn't fully wired up yet.
    QMetaObject::invokeMethod(this, &MainWindow::focusInput,
                              Qt::QueuedConnection);
  }
}

/**
 * @brief First-show hook: run the initial focusInput() pulse once the
 *        window is actually mapped. The widget's internal data is fully
 *        initialised by this point, so QLineEdit::selectAll() is safe.
 * @param event Show event passed to the base class.
 */
void MainWindow::showEvent(QShowEvent *event) {
  QMainWindow::showEvent(event);
  if (m_firstShowCompleted) {
    return;
  }
  // Queue the focus pulse for the next event-loop tick so the platform
  // map round-trip and any pending widget rebuilds (e.g. setWindowFlags
  // from the config wizard path) settle before we look up the line
  // edit. The `m_firstShowCompleted` latch is set inside focusInput()
  // *after* it actually focuses, so a transient failed lookup just
  // re-queues on the next show rather than silently dropping.
  QMetaObject::invokeMethod(this, &MainWindow::focusInput,
                            Qt::QueuedConnection);
}

/**
 * @brief MainWindow::initToolBarButtons init main ToolBar and connect actions
 */
void MainWindow::initToolBarButtons() {
  connect(ui->actionAddPassword, &QAction::triggered, this,
          &MainWindow::addPassword);
  connect(ui->actionAddFolder, &QAction::triggered, this,
          &MainWindow::addFolder);
  connect(ui->actionEdit, &QAction::triggered, this, &MainWindow::onEdit);
  connect(ui->actionDelete, &QAction::triggered, this, &MainWindow::onDelete);
  connect(ui->actionPush, &QAction::triggered, this, &MainWindow::onPush);
  connect(ui->actionUpdate, &QAction::triggered, this, &MainWindow::onUpdate);
  connect(ui->actionUsers, &QAction::triggered, this, &MainWindow::onUsers);
  connect(ui->actionConfig, &QAction::triggered, this, &MainWindow::onConfig);
  connect(ui->actionOtp, &QAction::triggered, this, &MainWindow::onOtp);

  // Menu-only actions. Quit ends the application, as Ctrl+Q/Cmd+Q does in
  // KeePassXC, Telegram and per the KDE, GNOME and macOS guidelines, tray
  // icon or not (#1788). Close window is what the old bare Ctrl+Q shortcut
  // did: close(), which closeEvent() turns into a hide when "hide on close"
  // is set. The X button and Alt+F4 are close() as well.
  connect(ui->actionQuit, &QAction::triggered, qApp, &QApplication::quit);
  connect(ui->actionClose, &QAction::triggered, this, &MainWindow::close);
#ifdef Q_OS_MACOS
  // The menu bar is the system's up there; nothing to hide.
  ui->actionShowMenuBar->setVisible(false);
#else
  // The action lives in the menu it hides, so it has to be on the window as
  // well for Ctrl+M to keep working while the bar is gone.
  addAction(ui->actionShowMenuBar);
  ui->actionShowMenuBar->setChecked(QtPassSettings::load().showMenuBar);
  menuBar()->setVisible(ui->actionShowMenuBar->isChecked());
  connect(ui->actionShowMenuBar, &QAction::toggled, this, [this](bool show) {
    menuBar()->setVisible(show);
    AppSettings s = QtPassSettings::load();
    s.showMenuBar = show;
    QtPassSettings::save(s);
  });
#endif
  connect(ui->actionFaq, &QAction::triggered, this, [] {
    QDesktopServices::openUrl(QUrl(QStringLiteral("https://qtpass.org/faq")));
  });
  connect(ui->actionAbout, &QAction::triggered, this, &MainWindow::showAbout);
  connect(ui->actionAboutQt, &QAction::triggered, qApp, &QApplication::aboutQt);

  ui->actionAddPassword->setIcon(
      QIcon::fromTheme("document-new", QIcon(":/icons/document-new.svg")));
  ui->actionAddFolder->setIcon(
      QIcon::fromTheme("folder-new", QIcon(":/icons/folder-new.svg")));
  ui->actionEdit->setIcon(QIcon::fromTheme(
      "document-properties", QIcon(":/icons/document-properties.svg")));
  ui->actionDelete->setIcon(
      QIcon::fromTheme("edit-delete", QIcon(":/icons/edit-delete.svg")));
  ui->actionPush->setIcon(
      QIcon::fromTheme("go-up", QIcon(":/icons/go-top.svg")));
  ui->actionUpdate->setIcon(
      QIcon::fromTheme("go-down", QIcon(":/icons/go-bottom.svg")));
  ui->actionUsers->setIcon(QIcon::fromTheme(
      "x-office-address-book", QIcon(":/icons/x-office-address-book.svg")));
  ui->actionConfig->setIcon(QIcon::fromTheme(
      "applications-system", QIcon(":/icons/applications-system.svg")));
}

/**
 * @brief MainWindow::initStatusBar init statusBar with default message and logo
 */
void MainWindow::initStatusBar() {
  ui->statusBar->showMessage(tr("Welcome to QtPass %1").arg(VERSION), 2000);

  QPixmap logo = QPixmap::fromImage(QImage(":/artwork/icon.svg"))
                     .scaledToHeight(statusBar()->height());
  auto *logoApp = new QLabel(statusBar());
  logoApp->setPixmap(logo);
  statusBar()->addPermanentWidget(logoApp);
}

auto MainWindow::getCurrentTreeViewIndex() -> QModelIndex {
  return ui->treeView->currentIndex();
}

/**
 * @brief Displays the given text in the main window text browser, optionally
 * marking it as an error and/or rendering it as HTML.
 * @example
 * MainWindow window;
 * window.flashText("Operation completed.", false, false);
 *
 * @param const QString &text - The text content to display.
 * @param const bool isError - If true, sets the text color to red before
 * displaying the text; otherwise any earlier error colour is cleared.
 * @param const bool isHtml - If true, treats the text as HTML and appends it to
 * the existing HTML content.
 * @return void - No return value.
 */
void MainWindow::flashText(const QString &text, const bool isError,
                           const bool isHtml) {
  if (isError) {
    ui->textBrowser->setTextColor(Qt::red);
  } else {
    // setTextColor() merges the red foreground into the browser's current
    // char format, and setText()/setPlainText() re-applies that format to the
    // whole new document. Without clearing it, a plain-text non-error message
    // shown after an error would still be red. Remove the property rather
    // than pinning a palette colour: an explicit foreground would stop the
    // text from following runtime light/dark palette switches (#946).
    QTextCharFormat format = ui->textBrowser->currentCharFormat();
    format.clearForeground();
    ui->textBrowser->setCurrentCharFormat(format);
  }

  if (isHtml) {
    QString _text = text;
    if (!ui->textBrowser->toPlainText().isEmpty()) {
      _text = ui->textBrowser->toHtml() + _text;
    }
    ui->textBrowser->setHtml(_text);
  } else {
    ui->textBrowser->setText(text);
  }
}

/**
 * @brief MainWindow::config pops up the configuration screen and handles all
 * inter-window communication
 */
void MainWindow::applyTextBrowserSettings() {
  const AppSettings s = QtPassSettings::load();
  if (s.useMonospace) {
    QFont monospace("Monospace");
    monospace.setStyleHint(QFont::Monospace);
    ui->textBrowser->setFont(monospace);
  } else {
    ui->textBrowser->setFont(QFont());
  }

  if (s.noLineWrapping) {
    ui->textBrowser->setLineWrapMode(QTextBrowser::NoWrap);
  } else {
    ui->textBrowser->setLineWrapMode(QTextBrowser::WidgetWidth);
  }
}

void MainWindow::applyWindowFlagsSettings() {
  const bool wantOnTop = QtPassSettings::isAlwaysOnTop();
  const Qt::WindowFlags flags = windowFlags();
  if (flags.testFlag(Qt::WindowStaysOnTopHint) == wantOnTop) {
    // Nothing to change. setWindowFlags() on a top-level widget rebuilds the
    // native window (setParent(nullptr, flags)), which used to happen on every
    // Settings OK because the "off" branch never compared equal — the same
    // teardown that left ui->lineEdit dangling (see focusInput()).
    return;
  }
  // Toggle just the one hint; the old "off" branch reset to Qt::Window and
  // discarded every other flag with it.
  const bool wasVisible = isVisible();
  setWindowFlags(wantOnTop ? (flags | Qt::WindowStaysOnTopHint)
                           : (flags & ~Qt::WindowStaysOnTopHint));
  // setWindowFlags() hides a shown window; a window that was not shown yet
  // (first-run wizard from the constructor) is left to its normal show.
  if (wasVisible) {
    show();
  }
}

/**
 * @brief Opens the configuration dialog (or, before the first usable
 * configuration, the first-run wizard) and applies what was accepted.
 * @example
 * if (!config()) {
 *   // the user cancelled
 * }
 *
 * @return bool - True when the dialog was accepted, false when it was
 * cancelled. An accepted dialog can still leave the configuration invalid
 * (the OK button is not gated on Util::configIsValid()); the constructor
 * keeps asking until the configuration is usable or this returns false.
 */
auto MainWindow::config() -> bool {
  if (m_freshStart) {
    // No usable configuration yet: the wizard finds the programs, the key
    // and the store, and creates the store when it has to.
    FirstRunWizard wizard(this);
    if (wizard.exec() != QDialog::Accepted) {
      return false;
    }
  } else {
    ConfigDialog d(this);
    d.setModal(true);
    if (d.exec() != QDialog::Accepted) {
      return false;
    }
  }

  applyTextBrowserSettings();
  applyWindowFlagsSettings();

  updateProfileBox();
  const AppSettings s = QtPassSettings::load();
  m_tree->setStore(s.passStore);
  deselect();
  ui->treeView->setCurrentIndex(QModelIndex());

  Pass *activePass = QtPassSettings::getPass();
  activePass->updateEnv();
  m_tree->setPass(activePass);
  clearPanelTimer.setInterval(MS_PER_SECOND * s.autoclearPanelSeconds);
  m_qtPass->clipboard().setAutoclearTimer();

  updateGitButtonVisibility();
  updateOtpButtonVisibility();
  updateGrepButtonVisibility();
  updateProcessOutputVisibility();
#ifndef Q_OS_MACOS
  // The action's toggled handler shows or hides the bar (and saves again).
  ui->actionShowMenuBar->setChecked(s.showMenuBar);
#endif
  if (s.useTrayIcon && m_tray == nullptr) {
    initTrayIcon();
  } else if (!s.useTrayIcon && m_tray != nullptr) {
    destroyTrayIcon();
  }

  // Leave the fresh-start state in place while the accepted configuration is
  // still unusable (for example the user declined to create the store), so
  // the next attempt from the constructor's loop runs the first-run wizard
  // again instead of showing the bare dialog. The re-prompt itself lives
  // there: recursing here re-ran the dialog on this stack frame and never
  // reported a cancel back to the caller.
  if (Util::configIsValid(s)) {
    m_freshStart = false;
  }
  return true;
}

/**
 * @brief MainWindow::onUpdate do a git pull
 */
void MainWindow::onUpdate(bool block) {
  ui->statusBar->showMessage(tr("Updating password-store"), 2000);
  if (block) {
    QtPassSettings::getPass()->GitPull_b();
  } else {
    QtPassSettings::getPass()->GitPull();
  }
}

/**
 * @brief MainWindow::onPush do a git push
 */
void MainWindow::onPush() {
  if (QtPassSettings::isUseGit()) {
    ui->statusBar->showMessage(tr("Updating password-store"), 2000);
    QtPassSettings::getPass()->GitPush();
  }
}

/**
 * @brief MainWindow::getFile get the selected file path
 * @param index
 * @param forPass returns relative path without '.gpg' extension
 * @return path
 * @return
 */
auto MainWindow::getFile(const QModelIndex &index, bool forPass) -> QString {
  return m_tree->fileFor(index, forPass);
}

/**
 * @brief MainWindow::on_treeView_clicked read the selected password file
 * @param index
 */
void MainWindow::on_treeView_clicked(const QModelIndex &index) {
  bool cleared = ui->treeView->currentIndex().flags() == Qt::NoItemFlags;
  QString file = getFile(index, true);
  ui->passwordName->setText(file);
  if (!file.isEmpty() && !cleared) {
    // Remember what the panel is about to show, so onOtp() can tell whether the
    // code it can see belongs to the entry that is currently selected.
    m_shownFile = file;
    QtPassSettings::getPass()->Show(file);
  } else {
    m_shownFile.clear();
    clearPanel(false);
    ui->actionEdit->setEnabled(false);
    ui->actionDelete->setEnabled(true);
  }
}

/**
 * @brief MainWindow::on_treeView_doubleClicked when doubleclicked on
 * TreeViewItem, open the edit Window
 * @param index
 */
void MainWindow::on_treeView_doubleClicked(const QModelIndex &index) {
  QFileInfo fileOrFolder = m_tree->fileInfo(ui->treeView->currentIndex());

  if (fileOrFolder.isFile()) {
    editPassword(getFile(index, true));
  }
}

/**
 * @brief MainWindow::deselect clear the selection, password and copy buffer
 */
void MainWindow::deselect() {
  m_shownFile.clear();
  cancelOtpRequest();
  m_qtPass->clipboard().clear();
  ui->treeView->clearSelection();
  ui->actionEdit->setEnabled(false);
  ui->actionDelete->setEnabled(false);
  ui->passwordName->setText("");
  clearPanel(false);
}

void MainWindow::executeWrapperStarted() {
  m_displayPanel->clear();
  ui->textBrowser->clear();
  setUiElementsEnabled(false);
  clearPanelTimer.stop();
  if (QtPassSettings::isShowProcessOutput()) {
    m_processOutput->setVisible(true);
  }
}

/**
 * @brief Handles displaying parsed password entry content in the main window:
 * the panel shows the parsed fields, the text browser what is left over.
 * @param p_output - The raw output text containing the password entry data.
 * @param file - The entry the output belongs to; anything but the entry most
 * recently asked for is dropped.
 */
void MainWindow::passShowHandler(const QString &p_output, const QString &file) {
  // Only the entry we most recently asked to show may repaint the panel; a
  // slower decrypt of an entry the user has since left is dropped.
  if (!file.isEmpty() && !m_shownFile.isEmpty() && file != m_shownFile) {
    return;
  }
  const AppSettings s = QtPassSettings::load();
  QStringList templ =
      s.useTemplate ? s.passTemplate.split("\n") : QStringList();
  bool allFields = s.useTemplate && s.templateAllFields;
  FileContent fileContent = FileContent::parse(p_output, templ, allFields);
  QString output = p_output;
  // Display variant: empty when the password line is itself an otpauth URI, so
  // the shared secret is neither rendered nor copied to the clipboard.
  QString password = fileContent.getPasswordForDisplay();

  // set clipped text
  //
  // Skipped for an OTP request: the user asked for a one-time code, not the
  // password, and writing both in one event-loop turn can leave the Windows
  // clipboard empty (two OleSetClipboard calls back to back).
  if (m_otpRequestFile.isEmpty() || m_otpRequestFile != file) {
    m_qtPass->clipboard().copyIfAlways(password, p_output);
  }

  // first clear the current view:
  m_displayPanel->clear();

  // show what is needed:
  if (s.hideContent) {
    output = "***" + tr("Content hidden") + "***";
  } else if (!s.displayAsIs) {
    m_displayPanel->displayFields(password, fileContent.getNamedValues(), s,
                                  s.useOtp ? fileContent.getOtpUri()
                                           : QString());
    output = fileContent.getRemainingDataForDisplay();
  }

  if (s.useAutoclearPanel) {
    clearPanelTimer.start();
  }

  flashText(QtPass::formatOutput(output), false, true);
  setUiElementsEnabled(true);
}

/**
 * @brief Generates a one-time password from a decrypted entry and copies it.
 *
 * Connected to Pass::finishedShow for good; reacts only to the entry onOtp()
 * asked for. passShowHandler is connected first, so by the time this runs the
 * panel has already been repainted and the UI re-enabled.
 *
 * @param p_output - The decrypted entry content.
 * @return void - This function does not return a value.
 */
void MainWindow::otpFromFileToClipboard(const QString &p_output,
                                        const QString &file) {
  // Permanently connected: only the decrypt of the entry onOtp() asked for
  // is ours, everything else belongs to a tree click or a Ctrl+C.
  if (m_otpRequestFile.isEmpty() || file != m_otpRequestFile) {
    return;
  }
  m_otpRequestFile.clear();

  if (p_output.isEmpty()) {
    // Distinguish "could not read the entry" from "entry has no OTP".
    flashText(tr("Could not decrypt this password entry"), true);
    setUiElementsEnabled(true);
    return;
  }

  // passShowHandler is connected first, so it has already repainted the panel
  // for this same finishedShow. When it rendered the OTP row the current code
  // is derived and cached, so reuse it instead of re-loading settings and
  // re-parsing p_output (mirrors onOtp()'s fast path). Falls through to a fresh
  // parse when no OTP row is shown (hideContent / displayAsIs / no OTP field).
  const QString shown = m_displayPanel->currentOtpCode();
  if (!shown.isEmpty()) {
    m_qtPass->clipboard().copyText(shown);
    showStatusMessage(tr("OTP code copied to clipboard"));
    setUiElementsEnabled(true);
    return;
  }

  const AppSettings s = QtPassSettings::load();
  // Parse with the same template settings passShowHandler uses, so an OTP
  // field is recognised identically in both paths.
  const QStringList templ =
      s.useTemplate ? s.passTemplate.split("\n") : QStringList();
  const bool allFields = s.useTemplate && s.templateAllFields;
  const FileContent fileContent =
      FileContent::parse(p_output, templ, allFields);

  const std::optional<Totp::Settings> settings =
      Totp::parse(fileContent.getOtpUri());
  if (settings.has_value()) {
    m_qtPass->clipboard().copyText(Totp::generateNow(*settings));
    showStatusMessage(tr("OTP code copied to clipboard"));
  } else {
    flashText(tr("No OTP code found in this password entry"), true);
  }
  setUiElementsEnabled(true);
}

/**
 * @brief MainWindow::clearPanel hide the information from shoulder surfers
 */
void MainWindow::clearPanel(bool notify) {
  m_displayPanel->clear();
  const bool grepWasVisible = ui->grepResultsList->isVisible();
  ui->grepResultsList->clear();
  if (grepWasVisible) {
    ui->grepResultsList->setVisible(false);
    ui->treeView->setVisible(true);
    if (m_grep.inGrepMode()) {
      m_grep.clearGrepMode();
      ui->grepButton->blockSignals(true);
      ui->grepButton->setChecked(false);
      ui->grepButton->blockSignals(false);
      ui->lineEdit->blockSignals(true);
      ui->lineEdit->clear();
      ui->lineEdit->blockSignals(false);
      ui->lineEdit->setPlaceholderText(tr("Search password"));
    }
  }
  if (notify) {
    QString output = "***" + tr("Password and content hidden") + "***";
    ui->textBrowser->setHtml(output);
  } else {
    ui->textBrowser->setHtml("");
  }
}

/**
 * @brief MainWindow::setUiElementsEnabled enable or disable the relevant UI
 * elements
 * @param state
 */
void MainWindow::setUiElementsEnabled(bool state) {
  // A running re-encryption owns the UI state: the progress dialog's Cancel is
  // the user's escape hatch and endReencryptPath() releases the interface, so
  // neither an unrelated completion nor the watchdog may re-enable it early.
  if (state && m_reencryptRunning) {
    m_uiWatchdog.stop();
    return;
  }
  // Arm the watchdog while the UI is disabled; disarm once re-enabled.
  if (state) {
    m_uiWatchdog.stop();
  } else {
    m_uiWatchdog.start();
  }
  ui->treeView->setEnabled(state);
  ui->lineEdit->setEnabled(state);
  ui->actionAddPassword->setEnabled(state);
  ui->actionAddFolder->setEnabled(state);
  ui->actionUsers->setEnabled(state);
  ui->actionConfig->setEnabled(state);
  const bool uiEnabled = state;
  // is a file selected?
  state &= ui->treeView->currentIndex().isValid();
  ui->actionDelete->setEnabled(state);
  ui->actionEdit->setEnabled(state);
  updateGitButtonVisibility(uiEnabled);
  // `state` is now "UI enabled AND a file is selected", which is exactly when
  // generating an OTP makes sense.
  updateOtpButtonVisibility(state);
}

/**
 * @brief Restores the main window geometry, state, position, size, and
 * tray/icon settings from saved application settings.
 * @example
 * MainWindow window;
 * window.restoreWindow();
 *
 * @return void - This function does not return a value.
 */
void MainWindow::restoreWindow() {
  // saveGeometry() covers position, size, maximized state and screen; the
  // separate pos/size/maximized keys that used to be applied on top of it
  // are what discarded the restored position, and the unconditional
  // re-centre in main() then discarded the rest. Centre only when nothing
  // was saved.
  const QByteArray geometry = QtPassSettings::getGeometry();
  if (geometry.isEmpty() || !restoreGeometry(geometry)) {
    WindowStateStore::centreOnCursorScreen(*this);
  }
  restoreState(QtPassSettings::getSavestate(saveState()));
  const AppSettings s = QtPassSettings::load();

  applyWindowFlagsSettings();

  if (s.useTrayIcon && m_tray == nullptr) {
    initTrayIcon();
    if (s.startMinimized) {
      // since we are still in constructor, can't directly hide
      QTimer::singleShot(10, this, &MainWindow::hide);
    }
  } else if (!s.useTrayIcon && m_tray != nullptr) {
    destroyTrayIcon();
  }
}

/**
 * @brief MainWindow::on_configButton_clicked run Mainwindow::config
 */
void MainWindow::onConfig() { config(); }

/**
 * @brief MainWindow::showAbout version, link and licence in a standard box.
 */
void MainWindow::showAbout() {
  QMessageBox::about(
      this, tr("About QtPass"),
      tr("<h3>QtPass %1</h3>"
         "<p>A multi-platform GUI for <a "
         "href=\"https://www.passwordstore.org/\">"
         "pass</a>, the standard Unix password manager.</p>"
         "<p><a href=\"https://qtpass.org/\">qtpass.org</a> &middot; "
         "<a href=\"https://github.com/IJHack/QtPass\">Source and "
         "issues</a></p>"
         "<p>Copyright &copy; 2014&ndash;%2 IJhack. Licensed under the "
         "<a href=\"https://www.gnu.org/licenses/gpl-3.0.html\">GNU GPL "
         "version 3</a> or later.</p>")
          .arg(QStringLiteral(VERSION),
               QString::number(QDate::currentDate().year())));
}

/**
 * @brief Executes when the string in the search box changes, collapses the
 * TreeView
 * @param arg1
 */
void MainWindow::on_lineEdit_textChanged(const QString &arg1) {
  if (m_grep.inGrepMode())
    return;
  ui->statusBar->showMessage(tr("Looking for: %1").arg(arg1), 1000);
  ui->treeView->expandAll();
  clearPanel(false);
  ui->passwordName->setText("");
  ui->actionEdit->setEnabled(false);
  ui->actionDelete->setEnabled(false);
  searchTimer.start();
}

/**
 * @brief MainWindow::onTimeoutSearch Fired when search is finished or too much
 * time from two keypresses is elapsed
 */
void MainWindow::onTimeoutSearch() {
  QString query = ui->lineEdit->text();

  if (query.isEmpty()) {
    ui->treeView->collapseAll();
    deselect();
  }

  query.replace(QStringLiteral(" "), ".*");
  QRegularExpression regExp(query, QRegularExpression::CaseInsensitiveOption);
  if (!regExp.isValid())
    return;
  m_tree->setFilter(regExp);

  if (m_tree->proxy().rowCount() > 0 && !query.isEmpty()) {
    selectFirstFile();
  } else {
    ui->actionEdit->setEnabled(false);
    ui->actionDelete->setEnabled(false);
  }
}

/**
 * @brief MainWindow::on_lineEdit_returnPressed get searching
 *
 * Select the first possible file in the tree
 */
void MainWindow::on_lineEdit_returnPressed() {
  qCDebug(lcQtPass) << "on_lineEdit_returnPressed"
                    << m_tree->proxy().rowCount();

  if (m_grep.inGrepMode()) {
    const QString query = ui->lineEdit->text();
    if (!query.isEmpty()) {
      ui->grepResultsList->clear();
      ui->statusBar->showMessage(tr("Searching…"));
      if (m_grep.beginSearch()) {
        QApplication::setOverrideCursor(Qt::WaitCursor);
      }
      QtPassSettings::getPass()->Grep(query, ui->grepCaseButton->isChecked());
    } else {
      if (m_grep.cancelSearch()) {
        QApplication::restoreOverrideCursor();
      }
      ui->grepResultsList->clear();
      ui->grepResultsList->setVisible(false);
      ui->treeView->setVisible(true);
    }
    return;
  }

  if (m_tree->proxy().rowCount() > 0) {
    selectFirstFile();
    on_treeView_clicked(ui->treeView->currentIndex());
  }
}

/**
 * @brief Toggle grep (content search) mode.
 */
void MainWindow::on_grepButton_toggled(bool checked) {
  const AppSettings s = QtPassSettings::load();
  if (checked) {
    m_grep.enterGrepMode();
    ui->lineEdit->setPlaceholderText(tr("Search content (regex)"));
    // The regex dialect depends on the backend (see Pass::Grep): the pass
    // backend uses POSIX BRE via `pass grep`, the native backend uses PCRE.
    ui->lineEdit->setToolTip(
        s.usePass
            ? tr("Content search uses POSIX basic regular expressions "
                 "(pass grep).")
            : tr("Content search uses Perl-compatible regular expressions "
                 "(PCRE)."));
    ui->lineEdit->clear();
    searchTimer.stop();
    m_tree->setFilter(QRegularExpression());
    ui->grepResultsList->setVisible(false);
    // Keep treeView visible until results arrive
  } else {
    if (m_grep.leaveGrepMode()) {
      QApplication::restoreOverrideCursor();
    }
    searchTimer.stop();
    ui->lineEdit->blockSignals(true);
    ui->lineEdit->clear();
    ui->lineEdit->blockSignals(false);
    ui->lineEdit->setPlaceholderText(tr("Search password"));
    ui->lineEdit->setToolTip(QString());
    ui->grepResultsList->clear();
    ui->grepResultsList->setVisible(false);
    ui->treeView->setVisible(true);
    m_tree->setFilter(QRegularExpression());
  }
}

/**
 * @brief Display grep results in grepResultsList.
 */
void MainWindow::onGrepFinished(
    const QList<QPair<QString, QStringList>> &results) {
  const GrepSearchController::FinishOutcome outcome = m_grep.finishSearch();
  if (outcome.restoreCursor) {
    QApplication::restoreOverrideCursor();
  }
  // Re-enable the UI before the discard check so a cancelled search can never
  // leave controls disabled.
  setUiElementsEnabled(true);
  if (outcome.discard) {
    return;
  }
  if (!m_grep.inGrepMode())
    return;
  ui->grepResultsList->clear();
  if (results.isEmpty()) {
    ui->statusBar->showMessage(tr("No matches found."), 3000);
    ui->grepResultsList->setVisible(false);
    ui->treeView->setVisible(true);
    return;
  }
  const AppSettings s = QtPassSettings::load();
  const bool hideContent = s.hideContent;
  int totalLines = 0;
  for (const auto &pair : results) {
    auto *entryItem = new QTreeWidgetItem(ui->grepResultsList);
    entryItem->setText(0, pair.first);
    entryItem->setData(0, Qt::UserRole, pair.first);
    for (const QString &line : pair.second) {
      auto *lineItem = new QTreeWidgetItem(entryItem);
      lineItem->setText(0, hideContent ? "***" + tr("Content hidden") + "***"
                                       : line);
      lineItem->setData(0, Qt::UserRole, pair.first);
      ++totalLines;
    }
  }
  ui->grepResultsList->expandAll();
  ui->treeView->setVisible(false);
  ui->grepResultsList->setVisible(true);
  ui->statusBar->showMessage(
      tr("Found %n match(es)", nullptr, totalLines) + " " +
          tr("in %n entr(ies).", nullptr, static_cast<int>(results.size())),
      3000);
  if (s.useAutoclearPanel)
    clearPanelTimer.start();
}

/**
 * @brief Navigate to the password entry when a grep result is clicked.
 */
void MainWindow::on_grepResultsList_itemClicked(QTreeWidgetItem *item,
                                                int /*column*/) {
  const AppSettings s = QtPassSettings::load();
  const QString entry = item->data(0, Qt::UserRole).toString();
  if (entry.isEmpty())
    return;
  const QString fullPath =
      QDir::cleanPath(QDir(s.passStore).filePath(entry + ".gpg"));
  const QModelIndex proxyIndex = m_tree->indexFor(fullPath);
  if (!proxyIndex.isValid())
    return;
  ui->treeView->setCurrentIndex(proxyIndex);
  on_treeView_clicked(proxyIndex);
  if (s.hideContent || s.useAutoclearPanel)
    ui->grepResultsList->clear();
  ui->grepResultsList->setVisible(false);
  ui->treeView->setVisible(true);
  ui->treeView->scrollTo(proxyIndex);
  ui->treeView->setFocus();
}

/**
 * @brief MainWindow::selectFirstFile select the first possible file in the
 * tree
 */
void MainWindow::selectFirstFile() {
  QModelIndex index = firstFile(m_tree->rootIndex());
  ui->treeView->setCurrentIndex(index);
}

/**
 * @brief MainWindow::firstFile return location of first possible file
 * @param parentIndex
 * @return QModelIndex
 */
auto MainWindow::firstFile(QModelIndex parentIndex) -> QModelIndex {
  StoreModel &proxy = m_tree->proxy();
  int numRows = proxy.rowCount(parentIndex);
  for (int row = 0; row < numRows; ++row) {
    QModelIndex index = proxy.index(row, 0, parentIndex);
    if (m_tree->fileInfo(index).isFile()) {
      return index;
    }
    if (proxy.hasChildren(index)) {
      QModelIndex childFile = firstFile(index);
      if (childFile.isValid())
        return childFile;
    }
  }
  return QModelIndex();
}

/**
 * @brief MainWindow::confirmPathInStore reject paths that resolve outside
 * the password store and warn the user.
 *
 * Used before file/folder creation, move, and rename to stop user-typed
 * names like "../../etc/passwd" or absolute paths from escaping the
 * configured store root via the input dialogs.
 *
 * @param candidate Absolute candidate path to validate.
 * @return true if the path is inside the password store; false otherwise (a
 * warning dialog is shown in that case).
 */
auto MainWindow::confirmPathInStore(const QString &candidate) -> bool {
  if (PathValidator::isPathInStore(QtPassSettings::getPassStore(), candidate)) {
    return true;
  }
  QMessageBox::warning(this, tr("Invalid name"),
                       tr("That name would resolve outside the password "
                          "store. Please choose a different name."));
  return false;
}

/**
 * @brief MainWindow::setPassword open passworddialog
 * @param file which pgp file
 * @param isNew insert (not update)
 */
void MainWindow::setPassword(const QString &file, bool isNew) {
  const AppSettings s = QtPassSettings::load();
  PasswordDialog d(QtPassSettings::getPass(), s, file, isNew, this);

  if (isNew) {
    const QString storePath = s.passStore;
    QString folder = m_tree->currentDir(false);
    if (folder.isEmpty()) {
      folder = storePath;
    }
    // The dialog names the entry itself: every folder of the store to pick
    // from, the tree's current one preselected.
    QStringList folders{QString()};
    QDirIterator it(storePath, QDir::Dirs | QDir::NoDotAndDotDot,
                    QDirIterator::Subdirectories);
    while (it.hasNext()) {
      const QString rel = QDir(storePath).relativeFilePath(it.next());
      if (!rel.startsWith(u'.') && !rel.contains(QStringLiteral("/."))) {
        folders << rel;
      }
    }
    std::sort(folders.begin() + 1, folders.end());
    d.setNewEntryLocation(storePath, folders,
                          QDir(storePath).relativeFilePath(folder));
    QHash<QString, QStringList> templates =
        TemplateIO::readTemplates(storePath);
    if (!templates.isEmpty()) {
      QString defaultTemplate =
          TemplateIO::getFolderTemplate(folder, storePath);
      d.setAvailableTemplates(templates, defaultTemplate);
    }
  }

  if (!d.exec()) {
    ui->treeView->setFocus();
  }
}

/**
 * @brief MainWindow::addPassword add a new password: one dialog with the
 * folder, the name and the content.
 */
void MainWindow::addPassword() { setPassword(QString()); }

/**
 * @brief MainWindow::onDelete remove password, if you are
 * sure.
 */
void MainWindow::onDelete() {
  QModelIndex currentIndex = ui->treeView->currentIndex();
  if (!currentIndex.isValid()) {
    // This fixes https://github.com/IJHack/QtPass/issues/556
    // Otherwise the entire password directory would be deleted if
    // nothing is selected in the tree view.
    return;
  }

  QFileInfo fileOrFolder = m_tree->fileInfo(ui->treeView->currentIndex());
  QString file = "";
  bool isDir = false;

  if (fileOrFolder.isFile()) {
    file = getFile(ui->treeView->currentIndex(), true);
  } else {
    file = m_tree->currentDir(true);
    isDir = true;
  }

  QString dirMessage = tr(" and the whole content?");
  if (isDir) {
    QDirIterator it(m_tree->fileSystem().rootPath() + QDir::separator() + file,
                    QDirIterator::Subdirectories);
    bool okDir = true;
    while (it.hasNext() && okDir) {
      it.next();
      if (QFileInfo(it.filePath()).isFile()) {
        if (QFileInfo(it.filePath()).suffix() != "gpg") {
          okDir = false;
          dirMessage = tr(" and the whole content? <br><strong>Attention: "
                          "there are unexpected files in the given folder, "
                          "check them before continue.</strong>");
        }
      }
    }
  }

  if (QMessageBox::question(
          this, isDir ? tr("Delete folder?") : tr("Delete password?"),
          tr("Are you sure you want to delete %1%2?")
              .arg(QDir::separator() + file, isDir ? dirMessage : "?"),
          QMessageBox::Yes | QMessageBox::No) != QMessageBox::Yes) {
    return;
  }

  QtPassSettings::getPass()->Remove(file, isDir);
}

/**
 * @brief MainWindow::cancelOtpRequest forget the pending OTP and copy requests.
 *
 * Connected to Pass::processErrorExit, and called from deselect(). A failed
 * decrypt never emits finishedShow; if the request stayed pending, the next
 * successful decrypt of that same entry (the user clicking it again) would be
 * taken as the answer and copy something the user no longer asked for.
 */
void MainWindow::cancelOtpRequest() {
  m_otpRequestFile.clear();
  m_copyRequestFile.clear();
}

/**
 * @brief MainWindow::onOtp generate the selected entry's OTP code and copy it.
 *
 * Decrypts the entry once and derives the code in-process, so this works with
 * either backend and on every platform. The code itself is produced by
 * otpFromFileToClipboard once Pass::finishedShow arrives.
 */
void MainWindow::onOtp() {
  QString file = getFile(ui->treeView->currentIndex(), true);
  if (file.isEmpty()) {
    flashText(tr("No password selected for OTP generation"), true);
    return;
  }
  if (!QtPassSettings::isUseOtp()) {
    // Normally unreachable (the action is hidden), but never fail silently.
    flashText(tr("No OTP code found in this password entry"), true);
    return;
  }

  // Fast path: the panel already shows a live code for the selected entry, so
  // there is nothing to decrypt. This also keeps the clipboard write single —
  // going through Show() would let passShowHandler copy the password first, and
  // two QClipboard::setMimeData calls in one event-loop turn can leave the
  // Windows clipboard empty.
  //
  // Only when the panel is showing *this* entry: arrow-key navigation and
  // right-clicking move the tree's currentIndex without emitting
  // QTreeView::clicked, so the visible code can belong to a different account.
  const QString shown =
      (m_shownFile == file) ? m_displayPanel->currentOtpCode() : QString();
  if (!shown.isEmpty()) {
    m_qtPass->clipboard().copyText(shown);
    showStatusMessage(tr("OTP code copied to clipboard"));
    return;
  }

  // Fallback: no OTP row on screen, so decrypt once. The request file stops
  // passShowHandler putting the password on the clipboard for a request that
  // only asked for a code, and tells otpFromFileToClipboard which decrypt is
  // its answer.
  m_otpRequestFile = file;
  setUiElementsEnabled(false);
  // passShowHandler repaints the panel for this Show too, so keep the marker in
  // step or a second request would decrypt again instead of taking the fast
  // path. Safe to set now: executeWrapperStarted() clears the panel on every
  // command, so a failed decrypt leaves currentOtpCode() empty.
  m_shownFile = file;
  QtPassSettings::getPass()->Show(file);
}

/**
 * @brief MainWindow::onEdit try and edit (selected) password.
 */
void MainWindow::onEdit() {
  QString file = getFile(ui->treeView->currentIndex(), true);
  editPassword(file);
}

/**
 * @brief MainWindow::onUsers edit users for the current
 * folder,
 * gets lists and opens UserDialog.
 */
void MainWindow::onUsers() {
  const QString dir = m_tree->currentDir(false);

  UsersDialog d(QtPassSettings::getPass(), QtPassSettings::load(), dir, this);
  if (!d.exec()) {
    ui->treeView->setFocus();
  }
}

/**
 * @brief MainWindow::messageAvailable we have some text/message/search to do.
 * @param message
 */
void MainWindow::messageAvailable(const QString &message) {
  show();
  raise();
  if (message.isEmpty()) {
    focusInput();
  } else {
    ui->treeView->expandAll();
    ui->lineEdit->setText(message);
    on_lineEdit_returnPressed();
  }
}

/**
 * @brief MainWindow::updateProfileBox update the list of profiles, optionally
 * select a more appropriate one to view too
 */
void MainWindow::updateProfileBox() {
  const Profiles profiles = QtPassSettings::getProfiles();

  if (profiles.isEmpty()) {
    ui->profileWidget->hide();
  } else {
    ui->profileWidget->show();
    ui->profileBox->setEnabled(profiles.size() > 1);
    ui->profileBox->clear();
    for (auto i = profiles.cbegin(); i != profiles.cend(); ++i) {
      if (!i.key().isEmpty()) {
        ui->profileBox->addItem(i.key());
      }
    }
    ui->profileBox->model()->sort(0);
  }
  int index = ui->profileBox->findText(QtPassSettings::getProfile());
  if (index != -1) { //  -1 for not found
    ui->profileBox->setCurrentIndex(index);
  }
}

/**
 * @brief Handles changes to the selected profile in the profile combo box.
 * @details Ignores the event during a fresh start or when the selected profile
 * matches the current profile. Otherwise, it clears the password field, updates
 * the active profile and related settings, refreshes the environment, and
 * resets the tree view and action states to reflect the newly selected profile.
 *
 * @param name - The newly selected profile name.
 * @return void - This function does not return a value.
 *
 */
void MainWindow::on_profileBox_currentTextChanged(const QString &name) {
  if (m_freshStart || name == QtPassSettings::getProfile()) {
    return;
  }

  ui->lineEdit->clear();

  const Profile prof = QtPassSettings::getProfiles().value(name);
  AppSettings s = QtPassSettings::load();
  s.activeProfile = name;
  s.passStore = prof.path;
  s.passSigningKey = prof.signingKey;
  // A profile without its own Git flags keeps the global values.
  s.useGit = prof.useGit.value_or(s.useGit);
  s.autoPush = prof.autoPush.value_or(s.autoPush);
  s.autoPull = prof.autoPull.value_or(s.autoPull);
  QtPassSettings::save(s);
  ui->statusBar->showMessage(tr("Profile changed to %1").arg(name), 2000);

  QtPassSettings::getPass()->updateEnv();

  m_tree->setStore(QtPassSettings::getPassStore());
  deselect();
  ui->treeView->setCurrentIndex(QModelIndex());
}

/**
 * @brief MainWindow::initTrayIcon show a nice tray icon on systems that
 * support
 * it
 */
void MainWindow::initTrayIcon() {
  m_tray = new TrayIcon(this);
  if (!m_tray->getIsAllocated()) {
    destroyTrayIcon();
  }
}

/**
 * @brief MainWindow::destroyTrayIcon remove that pesky tray icon
 */
void MainWindow::destroyTrayIcon() {
  delete m_tray;
  m_tray = nullptr;
}

/**
 * @brief MainWindow::closeEvent hide or quit
 * @param event
 */
void MainWindow::closeEvent(QCloseEvent *event) {
  // Save in both branches: a tray user only ever hides the window, and
  // used to quit through the tray menu with nothing ever written.
  saveWindowState();
  if (QtPassSettings::isHideOnClose()) {
    this->hide();
    event->ignore();
  } else {
    m_qtPass->clipboard().clear();
    event->accept();
    // A visible QSystemTrayIcon keeps the application alive after the last
    // window closes, so quitOnLastWindowClosed never fires and the window
    // merely vanishes into the tray. Quit explicitly so closing the window
    // actually exits when "hide on close" is disabled.
    QApplication::quit();
  }
}

/**
 * @brief MainWindow::eventFilter filter out some events and focus the
 * treeview
 * @param obj
 * @param event
 * @return
 */
auto MainWindow::eventFilter(QObject *obj, QEvent *event) -> bool {
  if (obj == ui->toolBar && event->type() == QEvent::PaletteChange) {
    // KDE's Breeze style gives top toolbars a "header" palette of its own.
    // After a runtime light/dark switch it recomputes that palette from a
    // cached kdeglobals and stamps the previous theme's colours back on, so
    // the toolbar stays dark on a light window (or vice versa) with matching
    // invisible icons. A legitimate header tint is close to the window
    // colour; a stale theme is not. When the two disagree, drop the imposed
    // palette so the toolbar follows the application palette again. Deferred
    // so we never re-enter the style while it is still applying its palette.
    QTimer::singleShot(0, this, &MainWindow::dropStaleToolBarPalette);
  }
  if (obj == ui->lineEdit && event->type() == QEvent::KeyPress) {
    auto *key = dynamic_cast<QKeyEvent *>(event);
    if (key != nullptr && key->key() == Qt::Key_Down) {
      ui->treeView->setFocus();
    }
  }
  return QObject::eventFilter(obj, event);
}

/**
 * @brief Reset the toolbar palette when a style left it in the wrong theme.
 *
 * Compares the lightness of the toolbar's Window colour with the application
 * palette; a difference above kStaleToolBarLightness means the toolbar shows
 * the other theme. See the PaletteChange branch in eventFilter().
 */
void MainWindow::dropStaleToolBarPalette() {
  if (!ui->toolBar->testAttribute(Qt::WA_SetPalette)) {
    return;
  }
  constexpr int kStaleToolBarLightness = 64;
  const int barLightness =
      ui->toolBar->palette().color(QPalette::Window).lightness();
  const int appLightness =
      QApplication::palette().color(QPalette::Window).lightness();
  if (qAbs(barLightness - appLightness) > kStaleToolBarLightness) {
    ui->toolBar->setPalette(QPalette());
    // The style also paints the tools-area background on the main window
    // from the same stale palette, and the toolbar is transparent by default;
    // paint our own background so the reset is actually visible.
    ui->toolBar->setAutoFillBackground(true);
  }
}

/**
 * @brief MainWindow::keyPressEvent did anyone press return, enter or escape?
 * @param event
 */
void MainWindow::keyPressEvent(QKeyEvent *event) {
  switch (event->key()) {
  case Qt::Key_Delete:
    onDelete();
    break;
  case Qt::Key_Return:
  case Qt::Key_Enter:
    if (m_tree->proxy().rowCount() > 0) {
      on_treeView_clicked(ui->treeView->currentIndex());
    }
    break;
  case Qt::Key_Escape:
    ui->lineEdit->clear();
    break;
  default:
    break;
  }
}

/**
 * @brief MainWindow::showContextMenu show us the (file or folder) context
 * menu
 * @param pos
 */
void MainWindow::showContextMenu(const QPoint &pos) {
  const AppSettings s = QtPassSettings::load();
  QModelIndex index = ui->treeView->indexAt(pos);
  bool selected = true;
  if (!index.isValid()) {
    ui->treeView->clearSelection();
    ui->actionDelete->setEnabled(false);
    ui->actionEdit->setEnabled(false);
    selected = false;
  }

  ui->treeView->setCurrentIndex(index);

  QPoint globalPos = ui->treeView->viewport()->mapToGlobal(pos);

  QFileInfo fileOrFolder = m_tree->fileInfo(ui->treeView->currentIndex());

  QMenu contextMenu;
  if (!selected || fileOrFolder.isDir()) {
    QAction *openFolder =
        contextMenu.addAction(tr("Open folder with file manager"));
    QAction *addFolder = contextMenu.addAction(tr("Add folder"));
    QAction *addPassword = contextMenu.addAction(tr("Add password"));
    QAction *users = contextMenu.addAction(tr("Users"));
    connect(openFolder, &QAction::triggered, this, &MainWindow::openFolder);
    connect(addFolder, &QAction::triggered, this, &MainWindow::addFolder);
    connect(addPassword, &QAction::triggered, this, &MainWindow::addPassword);
    connect(users, &QAction::triggered, this, &MainWindow::onUsers);
  } else if (fileOrFolder.isFile()) {
    QAction *edit = contextMenu.addAction(tr("Edit"));
    connect(edit, &QAction::triggered, this, &MainWindow::onEdit);
  }
  if (selected) {
    contextMenu.addSeparator();
    if (fileOrFolder.isDir()) {
      QAction *renameFolder = contextMenu.addAction(tr("Rename folder"));
      connect(renameFolder, &QAction::triggered, this,
              &MainWindow::renameFolder);
    } else if (fileOrFolder.isFile()) {
      QAction *renamePassword = contextMenu.addAction(tr("Rename password"));
      connect(renamePassword, &QAction::triggered, this,
              &MainWindow::renamePassword);
    }
    QAction *deleteItem = contextMenu.addAction(tr("Delete"));
    connect(deleteItem, &QAction::triggered, this, &MainWindow::onDelete);
    if (fileOrFolder.isDir()) {
      QString dirPath = QDir::cleanPath(m_tree->currentDir(false));

      auto *shareMenu = new QMenu(tr("Share"), &contextMenu);
      contextMenu.addMenu(shareMenu);

      QString gpgIdPath = Pass::getGpgIdPath(dirPath, s.passStore);
      bool gpgIdExists = !gpgIdPath.isEmpty() && QFile(gpgIdPath).exists();

      const QString exePath = s.usePass ? s.passExecutable : s.gpgExecutable;
      bool gpgAvailable = !exePath.isEmpty() && (exePath.startsWith("wsl ") ||
                                                 QFile(exePath).exists());

      QAction *reencrypt = shareMenu->addAction(tr("Re-encrypt all passwords"));
      reencrypt->setEnabled(gpgIdExists && gpgAvailable);
      connect(reencrypt, &QAction::triggered, this,
              [this, dirPath]() { reencryptPath(dirPath); });

      QAction *exportKey = shareMenu->addAction(tr("Export my public key..."));
      exportKey->setEnabled(gpgAvailable);
      connect(exportKey, &QAction::triggered, this,
              &MainWindow::exportPublicKey);

      QAction *addRecipientAction =
          shareMenu->addAction(tr("Add recipient..."));
      addRecipientAction->setEnabled(gpgIdExists && gpgAvailable);
      connect(addRecipientAction, &QAction::triggered, this,
              [this, dirPath]() { addRecipient(dirPath); });

      QAction *shareHelp = shareMenu->addAction(tr("What is this?"));
      connect(shareHelp, &QAction::triggered, this, &MainWindow::showShareHelp);
    }
  }
  contextMenu.exec(globalPos);
}

/**
 * @brief MainWindow::showBrowserContextMenu show us the context menu in
 * password window
 * @param pos
 */
void MainWindow::showBrowserContextMenu(const QPoint &pos) {
  QMenu *contextMenu = ui->textBrowser->createStandardContextMenu(pos);
  // createStandardContextMenu() parents the menu to textBrowser. A stylesheet
  // on the browser (it used to carry "background: palette(base)") cascades to
  // the child QMenu and breaks its opaque native background. Reparent to the
  // main window so the menu paints solid regardless of browser styling.
  contextMenu->setParent(this, contextMenu->windowFlags());
  QPoint globalPos = ui->textBrowser->viewport()->mapToGlobal(pos);

  contextMenu->exec(globalPos);
  delete contextMenu;
}

/**
 * @brief MainWindow::openFolder open the folder in the default file manager
 */
void MainWindow::openFolder() {
  QString dir = m_tree->currentDir(false);

  QString path = QDir::toNativeSeparators(dir);
  QDesktopServices::openUrl(QUrl::fromLocalFile(path));
}

/**
 * @brief MainWindow::addFolder add a new folder to store passwords in
 */
void MainWindow::addFolder() {
  const AppSettings s = QtPassSettings::load();
  bool ok;
  QString dir = m_tree->currentDir(false);
  QString newdir =
      QInputDialog::getText(this, tr("New folder"),
                            tr("New folder: \n(Will be placed in %1 )")
                                .arg(s.passStore + m_tree->currentDir(true)),
                            QLineEdit::Normal, "", &ok);
  if (!ok || newdir.isEmpty()) {
    return;
  }
  newdir.prepend(dir);
  if (!confirmPathInStore(newdir)) {
    return;
  }
  if (!QDir().mkdir(newdir)) {
    QMessageBox::warning(this, tr("Error"),
                         tr("Failed to create folder: %1").arg(newdir));
    return;
  }
  // A .gpg-id only counts when it is signed once a signing key is configured:
  // ImitatePass::verifyGpgIdFile and pass (PASSWORD_STORE_SIGNING_KEY) both
  // refuse to encrypt into a folder whose .gpg-id has no matching
  // .gpg-id.sig. Signing here would need the signing secret key and a
  // passphrase prompt just to create a folder, so in that case leave the
  // folder without its own .gpg-id: it inherits the parent's signed list,
  // which encrypts to the same recipients. UsersDialog (Init) is the place to
  // give it a distinct, signed list.
  const bool signingConfigured = !s.passSigningKey.trimmed().isEmpty();
  if (s.addGPGId && !signingConfigured) {
    // Seed the new folder's .gpg-id from the recipients that are currently
    // in effect for its parent. The previous implementation walked
    // listKeys("", true) and wrote every key whose `enabled` flag was set,
    // but that flag is only toggled inside UsersDialog, so the loop wrote
    // nothing and left a zero-byte .gpg-id that shadowed the parent's
    // recipients (see #1682).
    if (!Pass::seedGpgIdFile(newdir, s.passStore)) {
      QMessageBox::warning(
          this, tr("Error"),
          tr("Failed to create .gpg-id file in: %1").arg(newdir));
      return;
    }
  }
}

/**
 * @brief MainWindow::renameFolder rename an existing folder
 */
void MainWindow::renameFolder() {
  bool ok;
  QString srcDir = QDir::cleanPath(m_tree->currentDir(false));
  QString srcDirName = QDir(srcDir).dirName();
  QString newName =
      QInputDialog::getText(this, tr("Rename folder"), tr("Rename folder to: "),
                            QLineEdit::Normal, srcDirName, &ok);
  if (!ok || newName.isEmpty()) {
    return;
  }
  QString destDir = srcDir;
  destDir.replace(srcDir.lastIndexOf(srcDirName), srcDirName.length(), newName);
  if (!confirmPathInStore(destDir)) {
    return;
  }
  QtPassSettings::getPass()->Move(srcDir, destDir, false);
}

/**
 * @brief MainWindow::editPassword read password and open edit window via
 * MainWindow::onEdit()
 */
void MainWindow::editPassword(const QString &file) {
  if (!file.isEmpty()) {
    const AppSettings s = QtPassSettings::load();
    if (s.useGit && s.autoPull) {
      onUpdate(true);
    }
    setPassword(file, false);
  }
}

/**
 * @brief MainWindow::renamePassword rename an existing password
 */
void MainWindow::renamePassword() {
  bool ok;
  QString file = getFile(ui->treeView->currentIndex(), false);
  QString filePath = QFileInfo(file).path();
  QString fileName = QFileInfo(file).fileName();
  if (fileName.endsWith(".gpg", Qt::CaseInsensitive)) {
    fileName.chop(4);
  }

  QString newName =
      QInputDialog::getText(this, tr("Rename file"), tr("Rename file to: "),
                            QLineEdit::Normal, fileName, &ok);
  if (!ok || newName.isEmpty()) {
    return;
  }
  QString newFile = QDir(filePath).filePath(newName);
  if (!confirmPathInStore(newFile)) {
    return;
  }
  QtPassSettings::getPass()->Move(file, newFile, false);
}

/**
 * @brief Copies the password of the selected file from the tree view to the
 * clipboard.
 * @example
 * MainWindow::copyPasswordFromTreeview();
 *
 * @return void - This function does not return a value.
 */
void MainWindow::copyPasswordFromTreeview() {
  QFileInfo fileOrFolder = m_tree->fileInfo(ui->treeView->currentIndex());

  if (fileOrFolder.isFile()) {
    QString file = getFile(ui->treeView->currentIndex(), true);
    // The newest Ctrl+C wins: finishedShow names its file, so the decrypt of
    // an earlier request is simply not this one's.
    m_copyRequestFile = file;
    // This Show repaints the panel as well; see onOtp().
    m_shownFile = file;
    QtPassSettings::getPass()->Show(file);
  }
}

void MainWindow::passwordFromFileToClipboard(const QString &text,
                                             const QString &file) {
  if (m_copyRequestFile.isEmpty() || file != m_copyRequestFile) {
    return;
  }
  m_copyRequestFile.clear();
  const QStringList tokens = text.split('\n');
  if (tokens.isEmpty()) {
    return;
  }
  // An entry created by `pass otp insert` has the otpauth:// URI as its first
  // line. That URI carries the shared TOTP secret (the seed, not a code), so
  // copying it to the clipboard would leak 2FA material. Skip it, matching the
  // display path (FileContent::getPasswordForDisplay / PasswordDisplayPanel).
  if (FileContent::isOtpUriValue(tokens[0])) {
    flashText(tr("This entry holds an OTP secret, not a password"), true);
    return;
  }
  m_qtPass->clipboard().copyText(tokens[0]);
}

/**
 * @brief Displays message in status bar
 *
 * @param msg     text to be displayed
 * @param timeout time for which msg shall be visible
 */
void MainWindow::showStatusMessage(const QString &msg, int timeout) {
  ui->statusBar->showMessage(msg, timeout);
}

/**
 * @brief MainWindow::reencryptPath re-encrypt all passwords in a directory
 * @param dir Directory path to re-encrypt
 */
void MainWindow::reencryptPath(const QString &dir) {
  QDir checkDir(dir);
  if (!checkDir.exists()) {
    QMessageBox::critical(this, tr("Error"),
                          tr("Directory does not exist: %1").arg(dir));
    return;
  }

  int ret = QMessageBox::question(
      this, tr("Re-encrypt passwords"),
      tr("Re-encrypt all passwords in %1?\n\n"
         "This will re-encrypt ALL password files in this folder "
         "using the current recipients defined in .gpg-id.\n\n"
         "This may rewrite many files and cannot be undone easily.\n\n"
         "Continue?")
          .arg(QDir(dir).dirName()),
      QMessageBox::Yes | QMessageBox::No);

  if (ret != QMessageBox::Yes)
    return;

  // Disable preemptively. ImitatePass::reencryptPath emits
  // startReencryptPath asynchronously and the slot would re-run this,
  // but setEnabled(false) is idempotent so the duplicate is harmless.
  startReencryptPath();

  QtPassSettings::getImitatePass()->reencryptPath(
      QDir::cleanPath(QDir(dir).absolutePath()));
}

/**
 * @brief MainWindow::startReencryptPath disable ui elements and treeview and
 * show the progress dialog. Idempotent: MainWindow::reencryptPath calls it
 * before ImitatePass emits startReencryptPath.
 */
void MainWindow::startReencryptPath() {
  m_reencryptRunning = true;
  setUiElementsEnabled(false);
  // The worker always ends with endReencryptPath(), and Cancel is available
  // throughout, so the generic watchdog is not needed for this operation.
  m_uiWatchdog.stop();
  ui->treeView->setDisabled(true);
  if (m_reencryptProgress)
    return;
  auto *progress = new QProgressDialog(tr("Re-encrypting passwords..."),
                                       tr("Cancel"), 0, 0, this);
  progress->setWindowTitle(tr("Re-encrypt passwords"));
  progress->setWindowModality(Qt::WindowModal);
  progress->setAutoClose(false);
  progress->setAutoReset(false);
  progress->setMinimumDuration(0);
  connect(progress, &QProgressDialog::canceled, this, [this]() {
    QtPassSettings::getImitatePass()->cancelReencryptPath();
    showStatusMessage(tr("Cancelling re-encryption"), 5000);
  });
  m_reencryptProgress = progress;
  progress->show();
}

/**
 * @brief MainWindow::reencryptProgress show how many files were checked
 * @param current files checked so far
 * @param total files found under the folder
 */
void MainWindow::reencryptProgress(int current, int total) {
  if (!m_reencryptProgress)
    return;
  m_reencryptProgress->setMaximum(total);
  m_reencryptProgress->setLabelText(
      tr("Re-encrypting passwords: %1 of %2").arg(current).arg(total));
  // On a modal QProgressDialog setValue() calls processEvents(), which can
  // deliver the queued completion: endReencryptPath() then hides the dialog
  // and resets m_reencryptProgress under our feet. Keep it last and touch
  // nothing afterwards.
  m_reencryptProgress->setValue(current);
}

/**
 * @brief MainWindow::endReencryptPath re-enable ui elements
 */
void MainWindow::endReencryptPath() {
  m_reencryptRunning = false;
  if (m_reencryptProgress) {
    m_reencryptProgress->hide();
    m_reencryptProgress->deleteLater();
    m_reencryptProgress = nullptr;
  }
  setUiElementsEnabled(true);
}

/**
 * @brief MainWindow::exportPublicKey export the configured signing key in
 *        ASCII-armored form via gpg and show it in ExportPublicKeyDialog.
 *
 * Falls back to a help dialog when no signing key is configured or gpg is
 * unavailable, so the user still gets actionable guidance.
 */
void MainWindow::exportPublicKey() {
  const AppSettings s = QtPassSettings::load();
  const QString identity = s.passSigningKey;
  if (identity.isEmpty()) {
    QMessageBox::information(
        this, tr("Export public key"),
        tr("<h3>Export your public key</h3>"
           "<p>No signing key is configured. Set one in QtPass Settings "
           "&gt; GPG keys, or run this in a terminal:</p>"
           "<pre>gpg --armor --export --output my_key.asc &lt;your-key-id"
           "&gt;</pre>"
           "<p>Then send the file to your teammates.</p>"));
    return;
  }
  QString gpgExe = s.gpgExecutable;
  if (gpgExe.isEmpty()) {
    gpgExe = QStringLiteral("gpg");
  }
  QStringList args = {"--armor", "--export"};
  args.append(identity.split(' ', Qt::SkipEmptyParts));
  QString stdOut;
  QString stdErr;
  int exitCode = Executor::executeBlocking(gpgExe, args, &stdOut, &stdErr);
  if (exitCode != 0 || stdOut.isEmpty()) {
    QMessageBox::warning(this, tr("Export public key"),
                         tr("Could not export public key for %1.\n\n%2")
                             .arg(identity, stdErr.isEmpty()
                                                ? tr("No output from gpg.")
                                                : stdErr));
    return;
  }
  ExportPublicKeyDialog dialog(identity, stdOut, this);
  dialog.exec();
}

/**
 * @brief MainWindow::addRecipient open the recipient management dialog for
 *        the supplied directory.
 * @param dir Folder whose .gpg-id should be edited.
 *
 * Delegates to UsersDialog so users can tick/untick keys from their
 * keyring as recipients of the folder; importing a foreign key into the
 * keyring still has to happen via gpg (or QtPass settings) first.
 */
void MainWindow::addRecipient(const QString &dir) {
  UsersDialog d(QtPassSettings::getPass(), QtPassSettings::load(), dir, this);
  d.exec();
}

/**
 * @brief MainWindow::showShareHelp show help about GPG sharing
 */
void MainWindow::showShareHelp() {
  QMessageBox::information(
      this, tr("Sharing passwords with GPG"),
      tr("<h3>Sharing passwords with GPG</h3>"
         "<p>To share passwords with other users:</p>"
         "<ol>"
         "<li><b>Export your public key</b> and send it to teammates</li>"
         "<li><b>Import teammates' public keys</b> into your GPG keyring</li>"
         "<li><b>Re-encrypt passwords</b> so all recipients can decrypt "
         "them</li>"
         "</ol>"
         "<p>Only people who have a matching secret key can decrypt the "
         "passwords.</p>"
         "<p><b>Tip:</b> Use the same GPG key for all shared folders.</p>"
         "<p>See the FAQ for more details.</p>"));
}

void MainWindow::updateGitButtonVisibility(bool uiEnabled) {
  const AppSettings s = QtPassSettings::load();
  // Without Git there is nothing to push or pull, ever: the buttons go, not
  // grey out. While an operation runs they stay and are disabled.
  const bool usable =
      s.useGit && !(s.gitExecutable.isEmpty() && s.passExecutable.isEmpty());
  ui->actionPush->setVisible(usable);
  ui->actionUpdate->setVisible(usable);
  // The separator in front of them would otherwise sit next to the next one.
  const QList<QAction *> actions = ui->toolBar->actions();
  const qsizetype at = actions.indexOf(ui->actionPush);
  if (at > 0 && actions.at(at - 1)->isSeparator()) {
    actions.at(at - 1)->setVisible(usable);
  }
  enableGitButtons(usable && uiEnabled);
}

void MainWindow::updateOtpButtonVisibility(bool uiEnabled) {
  // No platform gating any more: codes are generated in-process, so this works
  // on Windows and macOS and with either backend. It used to be hidden there
  // because the pass-otp extension is Unix-only.
  //
  // Kept visible but disabled when OTP is off, as it was before: hiding it
  // removed the only discoverable trace of the feature, and since an OTP field
  // is suppressed from the panel unconditionally (its value is a secret), a
  // user with the setting off would see nothing at all where their OTP data
  // used to be.
  //
  // Enablement must honour uiEnabled: this is called from
  // setUiElementsEnabled(), and ignoring the argument re-enabled the action
  // while a decrypt was in flight, letting the user stack Show calls.
  ui->actionOtp->setVisible(true);
  ui->actionOtp->setEnabled(QtPassSettings::isUseOtp() && uiEnabled);
}

void MainWindow::updateGrepButtonVisibility() {
  const bool enabled = QtPassSettings::isUseGrepSearch();
  ui->grepButton->setVisible(enabled);
  ui->grepCaseButton->setVisible(enabled);
  if (!enabled && m_grep.inGrepMode()) {
    ui->grepButton->setChecked(false);
  }
}

void MainWindow::enableGitButtons(const bool &state) {
  ui->actionPush->setEnabled(state);
  ui->actionUpdate->setEnabled(state);
}

/**
 * @brief MainWindow::critical critical message popup wrapper.
 * @param title
 * @param msg
 */
void MainWindow::critical(const QString &title, const QString &msg) {
  QMessageBox::critical(this, title, msg);
}

/**
 * @brief Route a process's output to the console, unless the panel is
 *        switched off in the settings.
 * @param output The stdout/stderr text from the process.
 * @param isError true if this is error output (stderr).
 * @param pid The process that ran, for the line prefix.
 */
void MainWindow::onProcessOutput(const QString &output, bool isError,
                                 Enums::PROCESS pid) {
  if (!QtPassSettings::isShowProcessOutput()) {
    return;
  }
  m_processOutput->append(output, isError,
                          ProcessOutputPanel::processName(pid));
}

/**
 * @brief Show or hide the console per the showProcessOutput setting.
 */
void MainWindow::updateProcessOutputVisibility() {
  m_processOutput->setVisible(QtPassSettings::isShowProcessOutput());
}

IJHack / QtPass / 35437047893

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous