4
90%
master: 95%

Ran 04 Aug 2018 02:07PM UTC

Files 83

Run time 3s

Badge

Embed ▾

Committed 04 Aug 2018 02:02PM UTC coverage: 89.591%. Remained the same

Job # TOXENV=py35

Build Type

Pull #128

travis-ci

Committed by

web-flow

Commit Message

Adjusted to Home Assistant's changes to light colors

- Use HS color instead of RGB.
- As HS doesn't include brightness, offer setting brightness for colored lights directly.
- Added support for brightness & color being set simultaneously (even though that should be a rare case).

Notes:
- If both brightness_address and color_address are configured then changing the brightness will use the dedicated brightness_address, except if the color is to be changed at the exact same time.
- When the light is turned off, KNX devices typically report back #000000 for the RGB color, so the last set color is lost. If there is no dedicated brightness_address configured, then turning the light on via setting a new brightness will cause the color to be reset to white (dimming up from #000000 = black).
- Future changes can include HSV support, which does not suffer from this problem.

Pull Request Pull Request #128: Adjusted to Home Assistant's changes to light colors

Coverage Stats

3305 of 3689 relevant lines covered (89.59%)

0.9 hits per line

XKNX / xknx / 622 / 4
90%
master: 95%

README BADGES
x

Markdown

Textile

RDoc

HTML

Rst

Source Files on job 622.4 (TOXENV=py35)

XKNX / xknx / 622 / 4 90% master: 95%

README BADGES x

Markdown

Textile

RDoc

HTML

Rst

Source Files on job 622.4 (TOXENV=py35)

XKNX / xknx / 622 / 4
90%
master: 95%

README BADGES
x