stfc-aeg / odin-devices
75%
master: 90%

LAST BUILD BRANCH: add-ltc2986
DEFAULT BRANCH: master
Repo Added
Files 17
Badge
Embed ▾
README BADGES
x

If you need to use a raster PNG badge, change the '.svg' to '.png' in the link

Markdown

Textile

RDoc

HTML

Rst

LAST BUILD ON BRANCH add-ltc2986
branch: SELECT
CHANGE BRANCH
x

95

push

travis-ci-com

josephnobes-stfc 
Added ability to configure raw ADC input

After testing, line also added to force the SPI mode to 0, since in the
spi device driver it defaults to 1.

1039 of 1379 relevant lines covered (75.34%)

0.75 hits per line

Relevant lines Covered
1379 RELEVANT LINES 1039 COVERED LINES
0.75 HITS PER LINE
Source Files on master

Recent builds

Builds Branch Commit Type Ran Committer Via Coverage
95 add-ltc2986 Added ability to configure raw ADC input After testing, line also added to force the SPI mode to 0, since in the spi device driver it defaults to 1. push josephnobes-stfc travis-ci-com pending completion  
94 add-gpiod No coverage on handling different python versions push josephnobes-stfc travis-ci-com pending completion  
93 add-gpiod Attempt to fix issue with calling reset_mock() with Travis For some reason, although pytest passes on the dev machine, calling reset_mock() on the gpiod module fails on TravisCI. I have adapted it to reset the call counts on the functions being m... push josephnobes-stfc travis-ci-com pending completion  
85 add-firefly Fix error where select_line not defined push josephnobes-stfc travis-ci-com pending completion  
84 add-firefly Fixed error where CS not used with default address The CXP devices should not need a CS line when used in address range 0x40-0x7F. However, despite the default address (0x50) lying in this range, it does not apply since the value of the address r... push josephnobes-stfc travis-ci-com pending completion  
83 add-gpiod Minor tweaks following testing on HW push josephnobes-stfc travis-ci-com pending completion  
82 add-firefly Added modifications to support GPIO driver for CS lines, currently untested push josephnobes-stfc travis-ci-com pending completion  
81 add-gpiod Support for asynchronous events added, untested on HW Asynchronous events have now been added using concurrent.futures to create tasks in a ThreadPool for each monitor. These monitors are self-terminating when requested through the remove_pin_eve... push josephnobes-stfc travis-ci-com pending completion  
80 add-firefly Tweaks required after testing push josephnobes-stfc travis-ci-com pending completion  
78 add-firefly Basics of a unified FireFly driver laid out as a concept The simplest form of an auto-detecting unified FireFly driver has been added. This driver will read the upper byte 128 to determine if QSFP or CXP is being used, set up this interface with ... push josephnobes-stfc travis-ci-com pending completion  
See All Builds (61)