openconfig / featureprofiles / 20195587897
10%
main: 10%

LAST BUILD BRANCH: paramasivamn1-reboot
DEFAULT BRANCH: main
Ran
Jobs 1
Files 124
Run time 1min
Badge
Embed ▾
README BADGES
x

If you need to use a raster PNG badge, change the '.svg' to '.png' in the link

Markdown

Textile

RDoc

HTML

Rst
coverage: 10.034%. Remained the same
20195587897

Pull #4927

github

web-flow 
Update README.md

Update the PR to replace v4 transport with v6 transport. Following changes:

1.  **All IP addresses for the test:**
    *   Replaced with following IPv6 equivalents for the tunnel endpoint IP variables:
        *   `$DUT_TE11.v6/128`
        *   `$DUT_TE10.v6/128`
        *   `$ATE2_INTERNAL_TE11.v6/128`
        *   `$ATE2_INTERNAL_TE10.v6/128`

2.  **Advertisements - BGP:**
    *   Updated `$ATE2_IBGP.v[46]<>$DUT_lo0.v[46]` peering to advertise/expect `/128`, `/64' for the TE IPs.
    	- $ATE2_INTERNAL_TE10.v4/30 --replaced by--> $ATE2_INTERNAL_TE10.v6/64
    	- `$ATE2_INTERNAL_TE11.v4/30 -- replaced by --> `$ATE2_INTERNAL_TE11.v6/64 
    	- $DUT_TE10.v4/30 -- replaced by --> $DUT_TE10.v6/64
    	- $DUT_TE11.v4/30 -- replaced by --> $DUT_TE11.v6/64
    *   Updated `$ATE2_Port3<>$DUT_Port4` peering to advertise/expect `/128`, `/64` for the TE IPs.

3.  **Different Flows used throughout the test:**
    *   The "Tunnel endpoint used" column for Flow-Sets #1, #2, #3, and #4 now references the `.v6/128` tunnel IP variables (e.g., `$ATE2_INTERNAL_TE11.v6/128`, `$DUT_TE11.v6/128`).
    	- ATE2_INTERNAL_TE11.v4/32 --replaced by--> ATE2_INTERNAL_TE11.v6/128
    	- $DUT_TE11.v4/30 --replaced to--> $DUT_TE11.v6/64 

4.  **DUT Configuration:**
    *   Under **Static GUE Encapsulation (IPv6 Transport):**
        *   `tunnel-source` changed from `$DUT_lo0.v4` to `$DUT_lo0.v6`.
        *   `tunnel-destination1` changed to `$ATE2_INTERNAL_TE11.v6/128`.
        *   `tunnel-destination2` changed to `$ATE2_INTERNAL_TE10.v6/128`.
        *   Static route next-hops changed to the `.v6/128` tunnel destinations.
    *   Under **GUE Decapsulation:**
        *   Decapsulation ranges changed from `$DUT_TE11.v4/30` and `$DUT_TE10.v4/30` to `$DUT_TE11.v6/127` and `$DUT_TE10.v6/127`.


5.  **Test Expectations:**
    *   In RT-3.52.2, RT-3.52.5, RT-3.52.6, RT-3.52.7, and RT-3.52.8, expected tunnel destination IPs in the flow desc... (continued)
Pull Request #4927: Update README.md

2227 of 22195 relevant lines covered (10.03%)

0.11 hits per line

Jobs
ID Job ID Ran Files Coverage
1 20195587897.1 124
10.03
 GitHub Action Run
Source Files on build 20195587897