15167076265

Committed 21 May 2025 04:04PM UTC coverage: 84.995% (+0.02%) from 84.972%

Build # 15167076265

Build Type

Pull #2049

github

Committed by

web-flow

Commit Message

Merge bdf101448 into 80213b42a

Pull Request Pull Request #2049: Support compilation from SYCL source code

Run Details

2974 of 3778 branches covered (78.72%)

Branch coverage included in aggregate %.

191 of 218 new or added lines in 4 files covered. (87.61%)

1 existing line in 1 file now uncovered.

12422 of 14336 relevant lines covered (86.65%)

6783.57 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

93.13

/dpctl/memory/_sycl_usm_array_interface_utils.pxi

#                      Data Parallel Control (dpctl)
#
# Copyright 2020-2025 Intel Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

cdef bint _valid_usm_ptr_and_context(DPCTLSyclUSMRef ptr, SyclContext ctx):
    usm_type = _Memory.get_pointer_type(ptr, ctx)
    return usm_type in (b"shared", b"device", b"host")


cdef DPCTLSyclQueueRef _queue_ref_copy_from_SyclQueue(
    DPCTLSyclUSMRef ptr, SyclQueue q
):
    """ Check that USM ptr is consistent with SYCL context in the queue,
    and return a copy of QueueRef if so, or NULL otherwise.
    """
    cdef SyclContext ctx = q.get_sycl_context()
    if (_valid_usm_ptr_and_context(ptr, ctx)):
        return DPCTLQueue_Copy(q.get_queue_ref())
    else:
        return NULL


cdef DPCTLSyclQueueRef _queue_ref_copy_from_USMRef_and_SyclContext(
    DPCTLSyclUSMRef ptr, SyclContext ctx
):
    """ Obtain device from pointer and sycl context, use
        context and device to create a queue from which this memory
        can be accessible.
    """
    cdef SyclDevice dev = _Memory.get_pointer_device(ptr, ctx)
    cdef DPCTLSyclContextRef CRef = ctx.get_context_ref()
    cdef DPCTLSyclDeviceRef DRef = dev.get_device_ref()
    return DPCTLQueue_Create(CRef, DRef, NULL, 0)


cdef DPCTLSyclQueueRef get_queue_ref_from_ptr_and_syclobj(
        DPCTLSyclUSMRef ptr, object syclobj
):
    """ Constructs queue from pointer and syclobject from
        __sycl_usm_array_interface__
    """
    cdef SyclContext ctx
    if type(syclobj) is SyclQueue:
        return _queue_ref_copy_from_SyclQueue(ptr, <SyclQueue> syclobj)
    elif type(syclobj) is SyclContext:
        ctx = <SyclContext>syclobj
        return _queue_ref_copy_from_USMRef_and_SyclContext(ptr, ctx)
    elif type(syclobj) is str:
        q = SyclQueue(syclobj)
        return _queue_ref_copy_from_SyclQueue(ptr, <SyclQueue> q)
    elif pycapsule.PyCapsule_IsValid(syclobj, "SyclQueueRef"):
        q = SyclQueue(syclobj)
        return _queue_ref_copy_from_SyclQueue(ptr, <SyclQueue> q)
    elif pycapsule.PyCapsule_IsValid(syclobj, "SyclContextRef"):
        ctx = <SyclContext>SyclContext(syclobj)
        return _queue_ref_copy_from_USMRef_and_SyclContext(ptr, ctx)
    elif hasattr(syclobj, "_get_capsule"):
        cap = syclobj._get_capsule()
        if pycapsule.PyCapsule_IsValid(cap, "SyclQueueRef"):
            q = SyclQueue(cap)
            return _queue_ref_copy_from_SyclQueue(ptr, <SyclQueue> q)
        elif pycapsule.PyCapsule_IsValid(cap, "SyclContextRef"):
            ctx = <SyclContext>SyclContext(cap)
            return _queue_ref_copy_from_USMRef_and_SyclContext(ptr, ctx)
        else:
            return NULL
    else:
        return NULL


cdef object _pointers_from_shape_and_stride(
    int nd, object ary_shape, Py_ssize_t itemsize,
    Py_ssize_t ary_offset, object ary_strides
):
    """
    Internal utility: for given array data about shape/layout/element
    compute left-most displacement when enumerating all elements of the array
    and the number of bytes of memory between the left-most and right-most
    displacements.

    Returns: tuple(min_disp, nbytes)
    """
    cdef Py_ssize_t nelems = 1
    cdef Py_ssize_t min_disp = 0
    cdef Py_ssize_t max_disp = 0
    cdef int i
    cdef Py_ssize_t sh_i = 0
    cdef Py_ssize_t str_i = 0
    if (nd > 0):
        if (ary_strides is None):
            nelems = 1
            for si in ary_shape:
                sh_i = int(si)
                if (sh_i < 0):
                    raise ValueError("Array shape elements need to be positive")
                nelems = nelems * sh_i
            return (ary_offset, max(nelems, 1) * itemsize)
        else:
            min_disp = ary_offset
            max_disp = ary_offset
            for i in range(nd):
                str_i = int(ary_strides[i])
                sh_i = int(ary_shape[i])
                if (sh_i < 0):
                    raise ValueError("Array shape elements need to be positive")
                if (sh_i > 0):
                    if (str_i > 0):
                        max_disp += str_i * (sh_i - 1)
                    else:
                        min_disp += str_i * (sh_i - 1)
                else:
                    nelems = 0
            if nelems == 0:
                return (ary_offset, itemsize)
            return (min_disp, (max_disp - min_disp + 1) * itemsize)
    elif (nd == 0):
        return (ary_offset, itemsize)
    else:
        raise ValueError("Array dimensions can not be negative")


cdef class _USMBufferData:
    """
    Internal data struct populated from parsing
    `__sycl_usm_array_interface__` dictionary
    """
    cdef DPCTLSyclUSMRef p
    cdef int writable
    cdef object dt
    cdef Py_ssize_t itemsize
    cdef Py_ssize_t nbytes
    cdef SyclQueue queue

    @staticmethod
    cdef _USMBufferData from_sycl_usm_ary_iface(dict ary_iface):
        cdef object ary_data_tuple = ary_iface.get("data", None)
        cdef object ary_typestr = ary_iface.get("typestr", None)
        cdef object ary_shape = ary_iface.get("shape", None)
        cdef object ary_strides = ary_iface.get("strides", None)
        cdef object ary_syclobj = ary_iface.get("syclobj", None)
        cdef Py_ssize_t ary_offset = ary_iface.get("offset", 0)
        cdef int ary_version = ary_iface.get("version", 0)
        cdef size_t arr_data_ptr = 0
        cdef DPCTLSyclUSMRef memRef = NULL
        cdef Py_ssize_t itemsize = -1
        cdef int writable = -1
        cdef int nd = -1
        cdef DPCTLSyclQueueRef QRef = NULL
        cdef object dt
        cdef _USMBufferData buf
        cdef SyclDevice dev
        cdef SyclContext ctx

        if ary_version != 1:
            raise ValueError(("__sycl_usm_array_interface__ is malformed:"
                              " dict('version': {}) is unexpected."
                              " The only recognized version is 1.").format(
                                  ary_version))
        if not ary_data_tuple or len(ary_data_tuple) != 2:
            raise ValueError("__sycl_usm_array_interface__ is malformed:"
                             " 'data' field is required, and must be a tuple"
                             " (usm_pointer, is_writable_boolean).")
        arr_data_ptr = <size_t>ary_data_tuple[0]
        writable = 1 if ary_data_tuple[1] else 0
        # Check that memory and syclobj are consistent:
        # (USM pointer is bound to this sycl context)
        memRef = <DPCTLSyclUSMRef>arr_data_ptr
        QRef = get_queue_ref_from_ptr_and_syclobj(memRef, ary_syclobj)
        if (QRef is NULL):
            raise ValueError("__sycl_usm_array_interface__ is malformed:"
                             " 'data' field is not consistent with 'syclobj'"
                             " field, the pointer {} is not bound to"
                             " SyclContext derived from"
                             " dict('syclobj': {}).".format(
                                 hex(arr_data_ptr), ary_syclobj))
        # shape must be present
        if ary_shape is None or not (
                isinstance(ary_shape, collections.abc.Sized) and
                isinstance(ary_shape, collections.abc.Iterable)):
            DPCTLQueue_Delete(QRef)
            raise ValueError("Shape entry is a required element of "
                             "`__sycl_usm_array_interface__` dictionary")
        nd = len(ary_shape)
        try:
            dt = np.dtype(ary_typestr)
            if (dt.hasobject or not (np.issubdtype(dt.type, np.number) or
                                     dt.type is np.bool_)):
                DPCTLQueue_Delete(QRef)
                raise TypeError("Only integer types, floating and complex "
                                "floating types are supported.")
            itemsize = <Py_ssize_t> (dt.itemsize)
        except TypeError as e:
            raise ValueError(
                "__sycl_usm_array_interface__ is malformed:"
                " dict('typestr': {}) is unexpected. ".format(ary_typestr)
            ) from e

        if (ary_strides is None or (
                isinstance(ary_strides, collections.abc.Sized) and
                isinstance(ary_strides, collections.abc.Iterable) and
                len(ary_strides) == nd)):
            min_disp, nbytes = _pointers_from_shape_and_stride(
                nd, ary_shape, itemsize, ary_offset, ary_strides)
        else:
            DPCTLQueue_Delete(QRef)
            raise ValueError("__sycl_usm_array_interface__ is malformed: "
                             "'strides' must be a tuple or "
                             "list of the same length as shape")

        buf = _USMBufferData.__new__(_USMBufferData)
        buf.p = <DPCTLSyclUSMRef>(
            arr_data_ptr + (<Py_ssize_t>min_disp) * itemsize)
        buf.writable = writable
        buf.itemsize = itemsize
        buf.nbytes = <Py_ssize_t> nbytes

        buf.queue = SyclQueue._create(QRef)

        return buf

1	# Data Parallel Control (dpctl)
2	#
3	# Copyright 2020-2025 Intel Corporation
4	#
5	# Licensed under the Apache License, Version 2.0 (the "License");
6	# you may not use this file except in compliance with the License.
7	# You may obtain a copy of the License at
8	#
9	# http://www.apache.org/licenses/LICENSE-2.0
10	#
11	# Unless required by applicable law or agreed to in writing, software
12	# distributed under the License is distributed on an "AS IS" BASIS,
13	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14	# See the License for the specific language governing permissions and
15	# limitations under the License.
16
17	cdef bint _valid_usm_ptr_and_context(DPCTLSyclUSMRef ptr, SyclContext ctx):	1✔
18	usm_type = _Memory.get_pointer_type(ptr, ctx)	1✔
19	return usm_type in (b"shared", b"device", b"host")	1✔
20
21
22	cdef DPCTLSyclQueueRef _queue_ref_copy_from_SyclQueue(	×
23	DPCTLSyclUSMRef ptr, SyclQueue q
24	):
25	""" Check that USM ptr is consistent with SYCL context in the queue,
26	and return a copy of QueueRef if so, or NULL otherwise.
27	"""
28	cdef SyclContext ctx = q.get_sycl_context()	1✔
29	if (_valid_usm_ptr_and_context(ptr, ctx)):	1✔
30	return DPCTLQueue_Copy(q.get_queue_ref())	1✔
31	else:
32	return NULL	×
33
34
35	cdef DPCTLSyclQueueRef _queue_ref_copy_from_USMRef_and_SyclContext(	1✔
36	DPCTLSyclUSMRef ptr, SyclContext ctx
37	):
38	""" Obtain device from pointer and sycl context, use
39	context and device to create a queue from which this memory
40	can be accessible.
41	"""
42	cdef SyclDevice dev = _Memory.get_pointer_device(ptr, ctx)	1✔
43	cdef DPCTLSyclContextRef CRef = ctx.get_context_ref()	1✔
44	cdef DPCTLSyclDeviceRef DRef = dev.get_device_ref()	1✔
45	return DPCTLQueue_Create(CRef, DRef, NULL, 0)	1✔
46
47
48	cdef DPCTLSyclQueueRef get_queue_ref_from_ptr_and_syclobj(	×
49	DPCTLSyclUSMRef ptr, object syclobj
50	):
51	""" Constructs queue from pointer and syclobject from
52	__sycl_usm_array_interface__
53	"""
54	cdef SyclContext ctx
55	if type(syclobj) is SyclQueue:	1✔
56	return _queue_ref_copy_from_SyclQueue(ptr, <SyclQueue> syclobj)	1✔
57	elif type(syclobj) is SyclContext:	1✔
58	ctx = <SyclContext>syclobj	1✔
59	return _queue_ref_copy_from_USMRef_and_SyclContext(ptr, ctx)	1✔
60	elif type(syclobj) is str:	1✔
61	q = SyclQueue(syclobj)	1✔
62	return _queue_ref_copy_from_SyclQueue(ptr, <SyclQueue> q)	1✔
63	elif pycapsule.PyCapsule_IsValid(syclobj, "SyclQueueRef"):	1✔
64	q = SyclQueue(syclobj)	1✔
65	return _queue_ref_copy_from_SyclQueue(ptr, <SyclQueue> q)	1✔
66	elif pycapsule.PyCapsule_IsValid(syclobj, "SyclContextRef"):	1✔
67	ctx = <SyclContext>SyclContext(syclobj)	1✔
68	return _queue_ref_copy_from_USMRef_and_SyclContext(ptr, ctx)	1✔
69	elif hasattr(syclobj, "_get_capsule"):	1✔
70	cap = syclobj._get_capsule()	1✔
71	if pycapsule.PyCapsule_IsValid(cap, "SyclQueueRef"):	1✔
72	q = SyclQueue(cap)	1✔
73	return _queue_ref_copy_from_SyclQueue(ptr, <SyclQueue> q)	1✔
74	elif pycapsule.PyCapsule_IsValid(cap, "SyclContextRef"):	1✔
75	ctx = <SyclContext>SyclContext(cap)	1✔
76	return _queue_ref_copy_from_USMRef_and_SyclContext(ptr, ctx)	1✔
77	else:
78	return NULL	×
79	else:
80	return NULL	1✔
81
82
83	cdef object _pointers_from_shape_and_stride(	×
84	int nd, object ary_shape, Py_ssize_t itemsize,
85	Py_ssize_t ary_offset, object ary_strides
86	):
87	"""
88	Internal utility: for given array data about shape/layout/element
89	compute left-most displacement when enumerating all elements of the array
90	and the number of bytes of memory between the left-most and right-most
91	displacements.
92
93	Returns: tuple(min_disp, nbytes)
94	"""
95	cdef Py_ssize_t nelems = 1	1✔
96	cdef Py_ssize_t min_disp = 0	1✔
97	cdef Py_ssize_t max_disp = 0	1✔
98	cdef int i
99	cdef Py_ssize_t sh_i = 0	1✔
100	cdef Py_ssize_t str_i = 0	1✔
101	if (nd > 0):	1✔
102	if (ary_strides is None):	1✔
103	nelems = 1	1✔
104	for si in ary_shape:	1✔
105	sh_i = int(si)	1✔
106	if (sh_i < 0):	1✔
107	raise ValueError("Array shape elements need to be positive")	1✔
108	nelems = nelems * sh_i	1✔
109	return (ary_offset, max(nelems, 1) * itemsize)	1✔
110	else:
111	min_disp = ary_offset	1✔
112	max_disp = ary_offset	1✔
113	for i in range(nd):	1✔
114	str_i = int(ary_strides[i])	1✔
115	sh_i = int(ary_shape[i])	1✔
116	if (sh_i < 0):	1✔
117	raise ValueError("Array shape elements need to be positive")	1✔
118	if (sh_i > 0):	1✔
119	if (str_i > 0):	1✔
120	max_disp += str_i * (sh_i - 1)	1✔
121	else:
122	min_disp += str_i * (sh_i - 1)	1✔
123	else:
124	nelems = 0	×
125	if nelems == 0:	1✔
126	return (ary_offset, itemsize)	×
127	return (min_disp, (max_disp - min_disp + 1) * itemsize)	1✔
128	elif (nd == 0):	1✔
129	return (ary_offset, itemsize)	1✔
130	else:
131	raise ValueError("Array dimensions can not be negative")	×
132
133
134	cdef class _USMBufferData:
135	"""
136	Internal data struct populated from parsing
137	`__sycl_usm_array_interface__` dictionary
138	"""
139	cdef DPCTLSyclUSMRef p
140	cdef int writable
141	cdef object dt
142	cdef Py_ssize_t itemsize
143	cdef Py_ssize_t nbytes
144	cdef SyclQueue queue
145
UNCOV 146	@staticmethod	×
147	cdef _USMBufferData from_sycl_usm_ary_iface(dict ary_iface):
148	cdef object ary_data_tuple = ary_iface.get("data", None)	1✔
149	cdef object ary_typestr = ary_iface.get("typestr", None)	1✔
150	cdef object ary_shape = ary_iface.get("shape", None)	1✔
151	cdef object ary_strides = ary_iface.get("strides", None)	1✔
152	cdef object ary_syclobj = ary_iface.get("syclobj", None)	1✔
153	cdef Py_ssize_t ary_offset = ary_iface.get("offset", 0)	1✔
154	cdef int ary_version = ary_iface.get("version", 0)	1✔
155	cdef size_t arr_data_ptr = 0	1✔
156	cdef DPCTLSyclUSMRef memRef = NULL	1✔
157	cdef Py_ssize_t itemsize = -1	1✔
158	cdef int writable = -1	1✔
159	cdef int nd = -1	1✔
160	cdef DPCTLSyclQueueRef QRef = NULL	1✔
161	cdef object dt
162	cdef _USMBufferData buf
163	cdef SyclDevice dev
164	cdef SyclContext ctx
165
166	if ary_version != 1:	1✔
167	raise ValueError(("__sycl_usm_array_interface__ is malformed:"	1✔
168	" dict('version': {}) is unexpected."
169	" The only recognized version is 1.").format(	1✔
170	ary_version))	1✔
171	if not ary_data_tuple or len(ary_data_tuple) != 2:	1✔
172	raise ValueError("__sycl_usm_array_interface__ is malformed:"	1✔
173	" 'data' field is required, and must be a tuple"
174	" (usm_pointer, is_writable_boolean).")
175	arr_data_ptr = <size_t>ary_data_tuple[0]	1✔
176	writable = 1 if ary_data_tuple[1] else 0	1✔
177	# Check that memory and syclobj are consistent:
178	# (USM pointer is bound to this sycl context)
179	memRef = <DPCTLSyclUSMRef>arr_data_ptr	1✔
180	QRef = get_queue_ref_from_ptr_and_syclobj(memRef, ary_syclobj)	1✔
181	if (QRef is NULL):	1✔
182	raise ValueError("__sycl_usm_array_interface__ is malformed:"	1✔
183	" 'data' field is not consistent with 'syclobj'"
184	" field, the pointer {} is not bound to"
185	" SyclContext derived from"
186	" dict('syclobj': {}).".format(	1✔
187	hex(arr_data_ptr), ary_syclobj))	1✔
188	# shape must be present
189	if ary_shape is None or not (	1✔
190	isinstance(ary_shape, collections.abc.Sized) and	1✔
191	isinstance(ary_shape, collections.abc.Iterable)):	1✔
192	DPCTLQueue_Delete(QRef)	1✔
193	raise ValueError("Shape entry is a required element of "	1✔
194	"`__sycl_usm_array_interface__` dictionary")
195	nd = len(ary_shape)	1✔
196	try:	1✔
197	dt = np.dtype(ary_typestr)	1✔
198	if (dt.hasobject or not (np.issubdtype(dt.type, np.number) or	1✔
199	dt.type is np.bool_)):	1✔
200	DPCTLQueue_Delete(QRef)	1✔
201	raise TypeError("Only integer types, floating and complex "	1✔
202	"floating types are supported.")
203	itemsize = <Py_ssize_t> (dt.itemsize)	1✔
204	except TypeError as e:	1✔
205	raise ValueError(	1✔
206	"__sycl_usm_array_interface__ is malformed:"
207	" dict('typestr': {}) is unexpected. ".format(ary_typestr)	1✔
208	) from e	1✔
209
210	if (ary_strides is None or (	1✔
211	isinstance(ary_strides, collections.abc.Sized) and	1✔
212	isinstance(ary_strides, collections.abc.Iterable) and	1✔
213	len(ary_strides) == nd)):	1✔
214	min_disp, nbytes = _pointers_from_shape_and_stride(	1✔
215	nd, ary_shape, itemsize, ary_offset, ary_strides)
216	else:
217	DPCTLQueue_Delete(QRef)	1✔
218	raise ValueError("__sycl_usm_array_interface__ is malformed: "	1✔
219	"'strides' must be a tuple or "
220	"list of the same length as shape")
221
222	buf = _USMBufferData.__new__(_USMBufferData)	1✔
223	buf.p = <DPCTLSyclUSMRef>(	1✔
224	arr_data_ptr + (<Py_ssize_t>min_disp) * itemsize)	1✔
225	buf.writable = writable	1✔
226	buf.itemsize = itemsize	1✔
227	buf.nbytes = <Py_ssize_t> nbytes	1✔
228
229	buf.queue = SyclQueue._create(QRef)	1✔
230
231	return buf	1✔

IntelPython / dpctl / 15167076265

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous