Sanji-IO / sanji-bundle-cellular

38%

develop: 36%

LAST BUILD ON BRANCH release/thingspro_v2.0

branch: release/thingspro_v2.0

CHANGE BRANCH

x

Reset

• release/thingspro_v2.0
• MXCLOUD-0.9-DROPPED
• ThingsPro_V2.0
• ThingsPro_V2.1
• develop
• master
• pyup-update-coveralls-1.1-to-1.2.0
• pyup-update-coveralls-1.1-to-1.3.0
• pyup-update-coveralls-1.1-to-1.4.0
• pyup-update-coveralls-1.1-to-1.5.0
• pyup-update-coveralls-1.1-to-1.5.1
• pyup-update-coveralls-1.1-to-1.7.0
• pyup-update-decorator-4.0.10-to-4.0.11
• pyup-update-decorator-4.0.10-to-4.1.0
• pyup-update-decorator-4.0.10-to-4.1.1
• pyup-update-decorator-4.0.10-to-4.1.2
• pyup-update-decorator-4.0.10-to-4.2.0
• pyup-update-decorator-4.0.10-to-4.2.1
• pyup-update-decorator-4.0.10-to-4.3.0
• pyup-update-decorator-4.0.10-to-4.3.2
• pyup-update-decorator-4.0.10-to-4.4.0
• pyup-update-flake8-3.2.1-to-3.3.0
• pyup-update-flake8-3.2.1-to-3.4.0
• pyup-update-flake8-3.2.1-to-3.4.1
• pyup-update-flake8-3.2.1-to-3.5.0
• pyup-update-flake8-3.2.1-to-3.6.0
• pyup-update-flake8-3.2.1-to-3.7.2
• pyup-update-flake8-3.2.1-to-3.7.6
• pyup-update-flake8-3.2.1-to-3.7.7
• pyup-update-monotonic-1.2-to-1.3
• pyup-update-monotonic-1.2-to-1.4
• pyup-update-monotonic-1.2-to-1.5
• pyup-update-netifaces-0.10.5-to-0.10.6
• pyup-update-netifaces-0.10.5-to-0.10.7
• pyup-update-netifaces-0.10.5-to-0.10.8
• pyup-update-netifaces-0.10.5-to-0.10.9
• pyup-update-paho-mqtt-1.2-to-1.2.1
• pyup-update-paho-mqtt-1.2-to-1.2.3
• pyup-update-paho-mqtt-1.2.3-to-1.3.0
• pyup-update-paho-mqtt-1.2.3-to-1.3.1
• pyup-update-paho-mqtt-1.2.3-to-1.4.0
• pyup-update-sanji-1.0.0-to-1.0.1
• pyup-update-sh-1.12.3-to-1.12.4
• pyup-update-sh-1.12.3-to-1.12.5
• pyup-update-sh-1.12.3-to-1.12.6
• pyup-update-sh-1.12.3-to-1.12.7
• pyup-update-sh-1.12.3-to-1.12.8
• pyup-update-sh-1.12.3-to-1.12.9
• pyup-update-sh-1.12.9-to-1.12.10
• pyup-update-sh-1.12.9-to-1.12.11
• pyup-update-sh-1.12.9-to-1.12.12
• pyup-update-sh-1.12.9-to-1.12.13
• pyup-update-sh-1.12.9-to-1.12.14
• reboot-path
• release/thingspro-v2.0
• release/thingspro_v2.3
• release/uc-8100-lx-cg_v1.2
• release/uc-8100-lx-cg_v1.2-fix
• revert-154-auth

Build # 322

Build Type

Pull #106

travis-ci

Committed by web-flow

Commit Message

fix: should run after "route"

Pull Request Pull Request #106: [WIP] fix: should run after "route"

Run Details

476 of 1269 relevant lines covered (37.51%)

0.38 hits per line