14809507932

Committed 03 May 2025 09:13AM UTC coverage: 31.879% (+0.03%) from 31.845%

Build # 14809507932

Build Type

push

github

Committed by

web-flow

Commit Message

Merge pull request #1745 from mcallegari/qmluiqt6

Port QML UI to Qt6

Run Details

2 of 9 new or added lines in 3 files covered. (22.22%)

3720 existing lines in 174 files now uncovered.

16422 of 51513 relevant lines covered (31.88%)

19079.9 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

0.0

/ui/src/monitor/monitorfixturepropertieseditor.cpp

/*
  Q Light Controller Plus
  monitorfixturepropertieseditor.cpp

  Copyright (C) Massimo Callegari

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0.txt

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/

#include <QColorDialog>

#include "monitorfixturepropertieseditor.h"
#include "monitorgraphicsview.h"
#include "monitorfixtureitem.h"
#include "monitorproperties.h"

MonitorFixturePropertiesEditor::MonitorFixturePropertiesEditor(
        MonitorFixtureItem *fxItem, MonitorGraphicsView *gfxView,
        MonitorProperties *props, QWidget *parent) :
    QWidget(parent)
  , m_fxItem(fxItem)
  , m_gfxView(gfxView)
  , m_props(props)
{
    Q_ASSERT(fxItem != NULL);
    Q_ASSERT(gfxView != NULL);
    Q_ASSERT(props != NULL);

    setupUi(this);

    m_xPosSpin->setMaximum(m_gfxView->gridSize().width());
    m_yPosSpin->setMaximum(m_gfxView->gridSize().height());

    if (m_props->gridUnits() == MonitorProperties::Feet)
    {
        m_xPosSpin->setSuffix("ft");
        m_yPosSpin->setSuffix("ft");
    }
    else
    {
        m_xPosSpin->setSuffix("m");
        m_yPosSpin->setSuffix("m");
    }

    m_fxName->setText(m_fxItem->name());
    m_xPosSpin->setValue(m_fxItem->realPosition().x() / 1000);
    m_yPosSpin->setValue(m_fxItem->realPosition().y() / 1000);
    m_rotationSpin->setValue(m_fxItem->rotation());

    QPixmap pm(28, 28);
    if (m_fxItem->getColor().isValid())
    {
        pm.fill(m_fxItem->getColor());
        m_gelColorButton->setIcon(QIcon(pm));
    }

    connect(m_xPosSpin, SIGNAL(valueChanged(double)),
            this, SLOT(slotSetPosition()));
    connect(m_yPosSpin, SIGNAL(valueChanged(double)),
            this, SLOT(slotSetPosition()));
    connect(m_rotationSpin, SIGNAL(valueChanged(int)),
            this, SLOT(slotRotationChanged(int)));
    connect(m_gelColorButton, SIGNAL(clicked()),
            this, SLOT(slotGelColorClicked()));
    connect(m_gelResetButton, SIGNAL(clicked()),
            this, SLOT(slotGelResetClicked()));
}

MonitorFixturePropertiesEditor::~MonitorFixturePropertiesEditor()
{

}

void MonitorFixturePropertiesEditor::slotSetPosition()
{
    QPointF itemPos(m_xPosSpin->value() * 1000, m_yPosSpin->value() * 1000);
    m_fxItem->setPos(m_gfxView->realPositionToPixels(itemPos.x(), itemPos.y()));
    m_fxItem->setRealPosition(itemPos);
    m_props->setFixturePosition(m_fxItem->fixtureID(), 0, 0,QVector3D(itemPos.x(), itemPos.y(), 0));
}

void MonitorFixturePropertiesEditor::slotRotationChanged(int value)
{
    m_fxItem->setRotation(value);
    m_props->setFixtureRotation(m_fxItem->fixtureID(), 0, 0, QVector3D(0, value, 0));
}

void MonitorFixturePropertiesEditor::slotGelColorClicked()
{
    QColor color = m_fxItem->getColor();
    QColor newColor = QColorDialog::getColor(color);

    if (newColor.isValid())
    {
        m_fxItem->setGelColor(newColor);
        m_props->setFixtureGelColor(m_fxItem->fixtureID(), 0, 0, newColor);
        QPixmap pm(28, 28);
        pm.fill(newColor);
        m_gelColorButton->setIcon(QIcon(pm));
    }
}

void MonitorFixturePropertiesEditor::slotGelResetClicked()
{
    m_gelColorButton->setIcon(QIcon());
    m_fxItem->setGelColor(QColor());
    m_props->setFixtureGelColor(m_fxItem->fixtureID(), 0, 0, QColor());
}


1	/*
2	Q Light Controller Plus
3	monitorfixturepropertieseditor.cpp
4
5	Copyright (C) Massimo Callegari
6
7	Licensed under the Apache License, Version 2.0 (the "License");
8	you may not use this file except in compliance with the License.
9	You may obtain a copy of the License at
10
11	http://www.apache.org/licenses/LICENSE-2.0.txt
12
13	Unless required by applicable law or agreed to in writing, software
14	distributed under the License is distributed on an "AS IS" BASIS,
15	WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
16	See the License for the specific language governing permissions and
17	limitations under the License.
18	*/
19
20	#include <QColorDialog>
21
22	#include "monitorfixturepropertieseditor.h"
23	#include "monitorgraphicsview.h"
24	#include "monitorfixtureitem.h"
25	#include "monitorproperties.h"
26
27	MonitorFixturePropertiesEditor::MonitorFixturePropertiesEditor(	×
28	MonitorFixtureItem fxItem, MonitorGraphicsView gfxView,
29	MonitorProperties props, QWidget parent) :	×
30	QWidget(parent)
31	, m_fxItem(fxItem)	×
32	, m_gfxView(gfxView)	×
33	, m_props(props)	×
34	{
UNCOV 35	Q_ASSERT(fxItem != NULL);	×
UNCOV 36	Q_ASSERT(gfxView != NULL);	×
UNCOV 37	Q_ASSERT(props != NULL);	×
38
39	setupUi(this);	×
40
41	m_xPosSpin->setMaximum(m_gfxView->gridSize().width());	×
42	m_yPosSpin->setMaximum(m_gfxView->gridSize().height());	×
43
44	if (m_props->gridUnits() == MonitorProperties::Feet)	×
45	{
46	m_xPosSpin->setSuffix("ft");	×
47	m_yPosSpin->setSuffix("ft");	×
48	}
49	else
50	{
51	m_xPosSpin->setSuffix("m");	×
52	m_yPosSpin->setSuffix("m");	×
53	}
54
55	m_fxName->setText(m_fxItem->name());	×
56	m_xPosSpin->setValue(m_fxItem->realPosition().x() / 1000);	×
57	m_yPosSpin->setValue(m_fxItem->realPosition().y() / 1000);	×
58	m_rotationSpin->setValue(m_fxItem->rotation());	×
59
60	QPixmap pm(28, 28);	×
61	if (m_fxItem->getColor().isValid())	×
62	{
63	pm.fill(m_fxItem->getColor());	×
64	m_gelColorButton->setIcon(QIcon(pm));	×
65	}
66
67	connect(m_xPosSpin, SIGNAL(valueChanged(double)),	×
68	this, SLOT(slotSetPosition()));
69	connect(m_yPosSpin, SIGNAL(valueChanged(double)),	×
70	this, SLOT(slotSetPosition()));
71	connect(m_rotationSpin, SIGNAL(valueChanged(int)),	×
72	this, SLOT(slotRotationChanged(int)));
73	connect(m_gelColorButton, SIGNAL(clicked()),	×
74	this, SLOT(slotGelColorClicked()));
75	connect(m_gelResetButton, SIGNAL(clicked()),	×
76	this, SLOT(slotGelResetClicked()));
77	}	×
78
79	MonitorFixturePropertiesEditor::~MonitorFixturePropertiesEditor()	×
80	{
81
82	}	×
83
84	void MonitorFixturePropertiesEditor::slotSetPosition()	×
85	{
86	QPointF itemPos(m_xPosSpin->value() * 1000, m_yPosSpin->value() * 1000);	×
87	m_fxItem->setPos(m_gfxView->realPositionToPixels(itemPos.x(), itemPos.y()));	×
88	m_fxItem->setRealPosition(itemPos);	×
89	m_props->setFixturePosition(m_fxItem->fixtureID(), 0, 0,QVector3D(itemPos.x(), itemPos.y(), 0));	×
90	}	×
91
92	void MonitorFixturePropertiesEditor::slotRotationChanged(int value)	×
93	{
94	m_fxItem->setRotation(value);	×
95	m_props->setFixtureRotation(m_fxItem->fixtureID(), 0, 0, QVector3D(0, value, 0));	×
96	}	×
97
98	void MonitorFixturePropertiesEditor::slotGelColorClicked()	×
99	{
100	QColor color = m_fxItem->getColor();	×
101	QColor newColor = QColorDialog::getColor(color);	×
102
103	if (newColor.isValid())	×
104	{
105	m_fxItem->setGelColor(newColor);	×
106	m_props->setFixtureGelColor(m_fxItem->fixtureID(), 0, 0, newColor);	×
107	QPixmap pm(28, 28);	×
108	pm.fill(newColor);	×
109	m_gelColorButton->setIcon(QIcon(pm));	×
110	}	×
111	}	×
112
113	void MonitorFixturePropertiesEditor::slotGelResetClicked()	×
114	{
115	m_gelColorButton->setIcon(QIcon());	×
116	m_fxItem->setGelColor(QColor());	×
117	m_props->setFixtureGelColor(m_fxItem->fixtureID(), 0, 0, QColor());	×
118	}	×
119

mcallegari / qlcplus / 14809507932

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous