8961243534

Committed 05 May 2024 09:23PM UTC coverage: 32.068% (+4.0%) from 28.094%

Build # 8961243534

Build Type

push

github

Committed by

mcallegari

Commit Message

Merge branch 'master' into qmltoqt6

Run Details

902 of 2557 new or added lines in 140 files covered. (35.28%)

166 existing lines in 76 files now uncovered.

15395 of 48008 relevant lines covered (32.07%)

22949.67 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

79.84

/engine/src/keypadparser.cpp

/*
  Q Light Controller Plus
  keypadparser.cpp

  Copyright (c) Massimo Callegari

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0.txt

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/

#include <cmath>

#include "keypadparser.h"
#include "qlcmacros.h"
#include "universe.h"

KeyPadParser::KeyPadParser()
{

}

QList<SceneValue> KeyPadParser::parseCommand(Doc *doc, QString command,
                                             QByteArray &uniData)
{
    QList<SceneValue> values;
    if (doc == NULL)
        return values;

    QStringList tokens = command.split(" ");

    int lastCommand = CommandNone;
    quint32 fromChannel = 0;
    quint32 toChannel = 0;
    quint32 byChannel = 1;
    bool channelSet = false;
    float fromValue = 0;
    float toValue = 0;
    int thruCount = 0;

    foreach (QString token, tokens)
    {
        if (token.isEmpty())
            continue;

        if (token == "AT")
        {
            lastCommand = CommandAT;
        }
        else if (token == "THRU")
        {
            lastCommand = CommandTHRU;
        }
        else if (token == "FULL")
        {
            if (lastCommand == CommandAT)
                toValue = 255;

            lastCommand = CommandFULL;
        }
        else if (token == "ZERO")
        {
            if (lastCommand == CommandAT)
                toValue = 0;

            lastCommand = CommandZERO;
        }
        else if (token == "BY")
        {
            lastCommand = CommandBY;
        }
        else if (token == "+")
        {
            lastCommand = CommandPlus;
        }
        else if (token == "-")
        {
            lastCommand = CommandMinus;
        }
        else if (token == "+%")
        {
            lastCommand = CommandPlusPercent;
        }

        else if (token == "-%")
        {
            lastCommand = CommandMinusPercent;
        }
        else if (token == "%")
        {
            if (lastCommand == CommandPlus)
                lastCommand = CommandPlusPercent;
            else if (lastCommand == CommandMinus)
                lastCommand = CommandMinusPercent;
        }
        else
        {
            // most likely a number
            bool ok = false;
            int number = token.toUInt(&ok);

            if (ok == false)
                continue;

            switch (lastCommand)
            {
                case CommandNone:
                    // no command: this is a channel number
                    if (number <= 0)
                        break;

                    fromChannel = number;
                    toChannel = fromChannel;
                    channelSet = true;
                break;
                case CommandAT:
                    fromValue = float(number);
                    toValue = fromValue;
                break;
                case CommandTHRU:
                    if (thruCount == 0)
                        toChannel = number;
                    else
                        toValue = float(number);
                    thruCount++;
                break;
                case CommandFULL:
                    fromValue = 255;
                    toValue = 255;
                break;
                case CommandZERO:
                    fromValue = 0;
                    toValue = 0;
                break;
                case CommandBY:
                    byChannel = number;
                break;
                case CommandPlus:
                case CommandMinus:
                    toValue = number;
                break;
                case CommandPlusPercent:
                case CommandMinusPercent:
                    toValue = float(number) / 100.0;
                break;
            }
        }
    }

    /** handle the case where channel(s) are not specified.
     *  Compose a list of values based on the last channel list */

    if (channelSet == false)
    {
        if (m_channels.isEmpty())
            return values;

        for (int i = 0; i < m_channels.count(); i++)
        {
            SceneValue scv;

            scv.channel = m_channels.at(i);
            scv.value = toValue;
            values.append(scv);
        }

        return values;
    }
    else
    {
        m_channels.clear();
    }

    float valueDelta = 0;
    if (toValue != fromValue)
    {
        valueDelta = (float(toChannel) - float(fromChannel)) / float(byChannel);
        valueDelta = (float(toValue) - float(fromValue)) / valueDelta;
    }

    for (quint32 i = fromChannel - 1; i <= toChannel - 1; i += byChannel)
    {
        uchar uniValue = 0;
        SceneValue scv;

        if (i >= UNIVERSE_SIZE)
            continue;

        if (quint32(uniData.length()) > i)
            uniValue = uchar(uniData.at(i));

        scv.channel = i;
        if (lastCommand == CommandPlus)
            scv.value = CLAMP(uniValue + toValue, 0, 255);
        else if (lastCommand == CommandMinus)
            scv.value = CLAMP(uniValue - toValue, 0, 255);
        else if (lastCommand == CommandPlusPercent)
            scv.value = CLAMP(lrintf(uniValue * (1.0 + toValue)), 0, 255);
        else if (lastCommand == CommandMinusPercent)
            scv.value = CLAMP(lrintf(uniValue - (float(uniValue) * toValue)), 0, 255);
        else if (lastCommand == CommandZERO)
            scv.value = 0;
        else if (lastCommand == CommandFULL)
            scv.value = 255;
        else
            scv.value = uchar(fromValue);

        if (m_channels.contains(scv.channel) == false)
            m_channels.append(scv.channel);

        values.append(scv);
        fromValue += valueDelta;
    }

    return values;
}

1	/*
2	Q Light Controller Plus
3	keypadparser.cpp
4
5	Copyright (c) Massimo Callegari
6
7	Licensed under the Apache License, Version 2.0 (the "License");
8	you may not use this file except in compliance with the License.
9	You may obtain a copy of the License at
10
11	http://www.apache.org/licenses/LICENSE-2.0.txt
12
13	Unless required by applicable law or agreed to in writing, software
14	distributed under the License is distributed on an "AS IS" BASIS,
15	WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
16	See the License for the specific language governing permissions and
17	limitations under the License.
18	*/
19
20	#include <cmath>
21
22	#include "keypadparser.h"
23	#include "qlcmacros.h"
24	#include "universe.h"
25
26	KeyPadParser::KeyPadParser()	1✔
27	{
28
29	}	1✔
30
31	QList<SceneValue> KeyPadParser::parseCommand(Doc *doc, QString command,	12✔
32	QByteArray &uniData)
33	{
34	QList<SceneValue> values;	12✔
35	if (doc == NULL)	12✔
36	return values;	×
37
38	QStringList tokens = command.split(" ");	24✔
39
40	int lastCommand = CommandNone;	12✔
41	quint32 fromChannel = 0;	12✔
42	quint32 toChannel = 0;	12✔
43	quint32 byChannel = 1;	12✔
44	bool channelSet = false;	12✔
45	float fromValue = 0;	12✔
46	float toValue = 0;	12✔
47	int thruCount = 0;	12✔
48
49	foreach (QString token, tokens)	112✔
50	{
51	if (token.isEmpty())	50✔
52	continue;	×
53
54	if (token == "AT")	50✔
55	{
56	lastCommand = CommandAT;	7✔
57	}
58	else if (token == "THRU")	43✔
59	{
60	lastCommand = CommandTHRU;	7✔
61	}
62	else if (token == "FULL")	36✔
63	{
64	if (lastCommand == CommandAT)	3✔
65	toValue = 255;	1✔
66
67	lastCommand = CommandFULL;	3✔
68	}
69	else if (token == "ZERO")	33✔
70	{
71	if (lastCommand == CommandAT)	2✔
72	toValue = 0;	1✔
73
74	lastCommand = CommandZERO;	2✔
75	}
76	else if (token == "BY")	31✔
77	{
78	lastCommand = CommandBY;	3✔
79	}
80	else if (token == "+")	28✔
81	{
82	lastCommand = CommandPlus;	×
83	}
84	else if (token == "-")	28✔
85	{
86	lastCommand = CommandMinus;	×
87	}
88	else if (token == "+%")	28✔
89	{
90	lastCommand = CommandPlusPercent;	1✔
91	}
92
93	else if (token == "-%")	27✔
94	{
95	lastCommand = CommandMinusPercent;	1✔
96	}
97	else if (token == "%")	26✔
98	{
99	if (lastCommand == CommandPlus)	×
100	lastCommand = CommandPlusPercent;	×
101	else if (lastCommand == CommandMinus)	×
102	lastCommand = CommandMinusPercent;	×
103	}
104	else
105	{
106	// most likely a number
107	bool ok = false;	26✔
108	int number = token.toUInt(&ok);	26✔
109
110	if (ok == false)	26✔
111	continue;	×
112
113	switch (lastCommand)	26✔
114	{
115	case CommandNone:	9✔
116	// no command: this is a channel number
117	if (number <= 0)	9✔
NEW 118	break;	×
119
120	fromChannel = number;	9✔
121	toChannel = fromChannel;	9✔
122	channelSet = true;	9✔
123	break;	9✔
124	case CommandAT:	5✔
125	fromValue = float(number);	5✔
126	toValue = fromValue;	5✔
127	break;	5✔
128	case CommandTHRU:	7✔
129	if (thruCount == 0)	7✔
130	toChannel = number;	6✔
131	else
132	toValue = float(number);	1✔
133	thruCount++;	7✔
134	break;	7✔
135	case CommandFULL:	×
136	fromValue = 255;	×
137	toValue = 255;	×
138	break;	×
139	case CommandZERO:	×
140	fromValue = 0;	×
141	toValue = 0;	×
142	break;	×
143	case CommandBY:	3✔
144	byChannel = number;	3✔
145	break;	3✔
146	case CommandPlus:	×
147	case CommandMinus:
148	toValue = number;	×
149	break;	×
150	case CommandPlusPercent:	2✔
151	case CommandMinusPercent:
152	toValue = float(number) / 100.0;	2✔
153	break;	2✔
154	}
155	}
156	}
157
158	/** handle the case where channel(s) are not specified.
159	* Compose a list of values based on the last channel list */
160
161	if (channelSet == false)	12✔
162	{
163	if (m_channels.isEmpty())	3✔
164	return values;	×
165
166	for (int i = 0; i < m_channels.count(); i++)	27✔
167	{
168	SceneValue scv;	48✔
169
170	scv.channel = m_channels.at(i);	24✔
171	scv.value = toValue;	24✔
172	values.append(scv);	24✔
173	}
174
175	return values;	3✔
176	}
177	else
178	{
179	m_channels.clear();	9✔
180	}
181
182	float valueDelta = 0;	9✔
183	if (toValue != fromValue)	9✔
184	{
185	valueDelta = (float(toChannel) - float(fromChannel)) / float(byChannel);	3✔
186	valueDelta = (float(toValue) - float(fromValue)) / valueDelta;	3✔
187	}
188
189	for (quint32 i = fromChannel - 1; i <= toChannel - 1; i += byChannel)	61✔
190	{
191	uchar uniValue = 0;	52✔
192	SceneValue scv;	52✔
193
194	if (i >= UNIVERSE_SIZE)	52✔
NEW 195	continue;	×
196
197	if (quint32(uniData.length()) > i)	52✔
198	uniValue = uchar(uniData.at(i));	52✔
199
200	scv.channel = i;	52✔
201	if (lastCommand == CommandPlus)	52✔
202	scv.value = CLAMP(uniValue + toValue, 0, 255);	×
203	else if (lastCommand == CommandMinus)	52✔
204	scv.value = CLAMP(uniValue - toValue, 0, 255);	×
205	else if (lastCommand == CommandPlusPercent)	52✔
206	scv.value = CLAMP(lrintf(uniValue * (1.0 + toValue)), 0, 255);	6✔
207	else if (lastCommand == CommandMinusPercent)	46✔
208	scv.value = CLAMP(lrintf(uniValue - (float(uniValue) * toValue)), 0, 255);	6✔
209	else if (lastCommand == CommandZERO)	40✔
210	scv.value = 0;	1✔
211	else if (lastCommand == CommandFULL)	39✔
212	scv.value = 255;	11✔
213	else
214	scv.value = uchar(fromValue);	28✔
215
216	if (m_channels.contains(scv.channel) == false)	52✔
217	m_channels.append(scv.channel);	52✔
218
219	values.append(scv);	52✔
220	fromValue += valueDelta;	52✔
221	}
222
223	return values;	9✔
224	}

mcallegari / qlcplus / 8961243534

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous