6683238402

Committed 29 Oct 2023 12:10PM UTC coverage: 28.07%. Remained the same

Build # 6683238402

Build Type

push

github

Committed by

mcallegari

Commit Message

engine: fix build

Run Details

15385 of 54809 relevant lines covered (28.07%)

20267.63 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

77.96

/engine/src/qlcinputchannel.cpp

/*
  Q Light Controller
  qlcinputchannel.cpp

  Copyright (c) Heikki Junnila

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0.txt

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/

#include <QXmlStreamReader>
#include <QXmlStreamWriter>
#include <QString>
#include <QDebug>
#include <QIcon>

#include "qlcinputchannel.h"

/****************************************************************************
 * Initialization
 ****************************************************************************/

QLCInputChannel::QLCInputChannel()
    : m_type(Button)
    , m_movementType(Absolute)
    , m_movementSensitivity(20)
    , m_sendExtraPress(false)
    , m_lower(0)
    , m_upper(UCHAR_MAX)
{
}

QLCInputChannel *QLCInputChannel::createCopy()
{
    QLCInputChannel *copy = new QLCInputChannel();
    copy->setName(this->name());
    copy->setType(this->type());
    copy->setMovementType(this->movementType());
    copy->setMovementSensitivity(this->movementSensitivity());
    copy->setSendExtraPress(this->sendExtraPress());
    copy->setRange(this->lowerValue(), this->upperValue());

    return copy;
}

QLCInputChannel::~QLCInputChannel()
{
}

/****************************************************************************
 * Type
 ****************************************************************************/

void QLCInputChannel::setType(Type type)
{
    if (type == m_type)
        return;

    m_type = type;
    if (type == Encoder)
        m_movementSensitivity = 1;
    else
        m_movementSensitivity = 20;

    emit typeChanged();
}

QLCInputChannel::Type QLCInputChannel::type() const
{
    return m_type;
}

QString QLCInputChannel::typeToString(Type type)
{
    switch (type)
    {
        case Button:
            return KXMLQLCInputChannelButton;
        case Knob:
            return KXMLQLCInputChannelKnob;
        case Encoder:
            return KXMLQLCInputChannelEncoder;
        case Slider:
            return KXMLQLCInputChannelSlider;
        case NextPage:
            return KXMLQLCInputChannelPageUp;
        case PrevPage:
            return KXMLQLCInputChannelPageDown;
        case PageSet:
            return KXMLQLCInputChannelPageSet;
        default:
            return KXMLQLCInputChannelNone;
        }
}

QString QLCInputChannel::typeString()
{
    return typeToString(type());
}

QLCInputChannel::Type QLCInputChannel::stringToType(const QString& type)
{
    if (type == KXMLQLCInputChannelButton)
        return Button;
    else if (type == KXMLQLCInputChannelKnob)
        return Knob;
    else if (type == KXMLQLCInputChannelEncoder)
        return Encoder;
    else if (type == KXMLQLCInputChannelSlider)
        return Slider;
    else if (type == KXMLQLCInputChannelPageUp)
        return NextPage;
    else if (type == KXMLQLCInputChannelPageDown)
        return PrevPage;
    else if (type == KXMLQLCInputChannelPageSet)
        return PageSet;
    else
        return NoType;
}

QStringList QLCInputChannel::types()
{
    QStringList list;
    list << KXMLQLCInputChannelSlider;
    list << KXMLQLCInputChannelKnob;
    list << KXMLQLCInputChannelEncoder;
    list << KXMLQLCInputChannelButton;
    list << KXMLQLCInputChannelPageUp;
    list << KXMLQLCInputChannelPageDown;
    list << KXMLQLCInputChannelPageSet;
    return list;
}

QIcon QLCInputChannel::typeToIcon(Type type)
{
    return QIcon(iconResource(type));
}

QIcon QLCInputChannel::stringToIcon(const QString& str)
{
    return typeToIcon(stringToType(str));
}

QString QLCInputChannel::iconResource(Type type, bool svg)
{
    QString prefix = svg ? "qrc" : "";
    QString ext = svg ? "svg" : "png";

    switch(type)
    {
        case Button: return QString("%1:/button.%2").arg(prefix, ext);
        case Knob: return QString("%1:/knob.%2").arg(prefix, ext);
        case Encoder: return QString("%1:/knob.%2").arg(prefix, ext);
        case Slider: return QString("%1:/slider.%2").arg(prefix, ext);
        case PrevPage: return QString("%1:/forward.%2").arg(prefix, ext);
        case NextPage: return QString("%1:/back.%2").arg(prefix, ext);
        case PageSet: return QString("%1:/star.%2").arg(prefix, ext);
        default: return QString();
    }

    return QString("%1:/other.%2").arg(prefix, ext);
}

QIcon QLCInputChannel::icon() const
{
    return typeToIcon(type());
}

/****************************************************************************
 * Name
 ****************************************************************************/

void QLCInputChannel::setName(const QString& name)
{
    if (name == m_name)
        return;

    m_name = name;

    emit nameChanged();
}

QString QLCInputChannel::name() const
{
    return m_name;
}

/*********************************************************************
 * Slider/Knob movement behaviour specific methods
 *********************************************************************/

QLCInputChannel::MovementType QLCInputChannel::movementType() const
{
    return m_movementType;
}

void QLCInputChannel::setMovementType(QLCInputChannel::MovementType type)
{
    m_movementType = type;
}

int QLCInputChannel::movementSensitivity() const
{
    return m_movementSensitivity;
}

void QLCInputChannel::setMovementSensitivity(int value)
{
    m_movementSensitivity = value;
}

/*********************************************************************
 * Button behaviour specific methods
 *********************************************************************/

void QLCInputChannel::setSendExtraPress(bool enable)
{
    if (enable == m_sendExtraPress)
        return;

    m_sendExtraPress = enable;
    emit sendExtraPressChanged();
}

bool QLCInputChannel::sendExtraPress() const
{
    return m_sendExtraPress;
}

void QLCInputChannel::setRange(uchar lower, uchar upper)
{
    setLowerValue(lower);
    setUpperValue(upper);
}

uchar QLCInputChannel::lowerValue() const
{
    return m_lower;
}

void QLCInputChannel::setLowerValue(const uchar value)
{
    if (value == m_lower)
        return;

    m_lower = value;
    emit lowerValueChanged();
}

uchar QLCInputChannel::upperValue() const
{
    return m_upper;
}

void QLCInputChannel::setUpperValue(const uchar value)
{
    if (value == m_upper)
        return;

    m_upper = value;
    emit upperValueChanged();
}

/****************************************************************************
 * Load & Save
 ****************************************************************************/

bool QLCInputChannel::loadXML(QXmlStreamReader &root)
{
    if (root.isStartElement() == false || root.name() != KXMLQLCInputChannel)
    {
        qWarning() << Q_FUNC_INFO << "Channel node not found";
        return false;
    }

    while (root.readNextStartElement())
    {
        if (root.name() == KXMLQLCInputChannelName)
        {
            setName(root.readElementText());
        }
        else if (root.name() == KXMLQLCInputChannelType)
        {
            setType(stringToType(root.readElementText()));
        }
        else if (root.name() == KXMLQLCInputChannelExtraPress)
        {
            root.readElementText();
            setSendExtraPress(true);
        }
        else if (root.name() == KXMLQLCInputChannelMovement)
        {
            if (root.attributes().hasAttribute(KXMLQLCInputChannelSensitivity))
                setMovementSensitivity(root.attributes().value(KXMLQLCInputChannelSensitivity).toString().toInt());

            if (root.readElementText() == KXMLQLCInputChannelRelative)
                setMovementType(Relative);
        }
        else if (root.name() == KXMLQLCInputChannelFeedbacks)
        {
            uchar min = 0, max = UCHAR_MAX;

            if (root.attributes().hasAttribute(KXMLQLCInputChannelLowerValue))
                min = uchar(root.attributes().value(KXMLQLCInputChannelLowerValue).toString().toUInt());
            if (root.attributes().hasAttribute(KXMLQLCInputChannelUpperValue))
                max = uchar(root.attributes().value(KXMLQLCInputChannelUpperValue).toString().toUInt());

            setRange(min, max);
            root.skipCurrentElement();
        }
        else
        {
            qWarning() << Q_FUNC_INFO << "Unknown input channel tag" << root.name();
            root.skipCurrentElement();
        }
    }

    return true;
}

bool QLCInputChannel::saveXML(QXmlStreamWriter *doc, quint32 channelNumber) const
{
    if (doc == NULL || doc->device() == NULL)
        return false;

    doc->writeStartElement(KXMLQLCInputChannel);
    doc->writeAttribute(KXMLQLCInputChannelNumber,
                        QString("%1").arg(channelNumber));

    doc->writeTextElement(KXMLQLCInputChannelName, m_name);
    doc->writeTextElement(KXMLQLCInputChannelType, typeToString(m_type));
    if (sendExtraPress() == true)
        doc->writeTextElement(KXMLQLCInputChannelExtraPress, "True");

    /* Save only slider's relative movement */
    if ((type() == Slider || type() == Knob) && movementType() == Relative)
    {
        doc->writeStartElement(KXMLQLCInputChannelMovement);
        doc->writeAttribute(KXMLQLCInputChannelSensitivity, QString::number(movementSensitivity()));
        doc->writeCharacters(KXMLQLCInputChannelRelative);
        doc->writeEndElement();
    }
    else if (type() == Encoder)
    {
        doc->writeStartElement(KXMLQLCInputChannelMovement);
        doc->writeAttribute(KXMLQLCInputChannelSensitivity, QString::number(movementSensitivity()));
        doc->writeEndElement();
    }
    else if (type() == Button && (lowerValue() != 0 || upperValue() != UCHAR_MAX))
    {
        doc->writeStartElement(KXMLQLCInputChannelFeedbacks);
        if (lowerValue() != 0)
            doc->writeAttribute(KXMLQLCInputChannelLowerValue, QString::number(lowerValue()));
        if (upperValue() != UCHAR_MAX)
            doc->writeAttribute(KXMLQLCInputChannelUpperValue, QString::number(upperValue()));
        doc->writeEndElement();
    }

    doc->writeEndElement();
    return true;
}

1	/*
2	Q Light Controller
3	qlcinputchannel.cpp
4
5	Copyright (c) Heikki Junnila
6
7	Licensed under the Apache License, Version 2.0 (the "License");
8	you may not use this file except in compliance with the License.
9	You may obtain a copy of the License at
10
11	http://www.apache.org/licenses/LICENSE-2.0.txt
12
13	Unless required by applicable law or agreed to in writing, software
14	distributed under the License is distributed on an "AS IS" BASIS,
15	WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
16	See the License for the specific language governing permissions and
17	limitations under the License.
18	*/
19
20	#include <QXmlStreamReader>
21	#include <QXmlStreamWriter>
22	#include <QString>
23	#include <QDebug>
24	#include <QIcon>
25
26	#include "qlcinputchannel.h"
27
28	/****************************************************************************
29	* Initialization
30	****************************************************************************/
31
32	QLCInputChannel::QLCInputChannel()	11,975✔
33	: m_type(Button)
34	, m_movementType(Absolute)
35	, m_movementSensitivity(20)
36	, m_sendExtraPress(false)
37	, m_lower(0)
38	, m_upper(UCHAR_MAX)	11,975✔
39	{
40	}	11,975✔
41
42	QLCInputChannel *QLCInputChannel::createCopy()	10✔
43	{
44	QLCInputChannel *copy = new QLCInputChannel();	10✔
45	copy->setName(this->name());	10✔
46	copy->setType(this->type());	10✔
47	copy->setMovementType(this->movementType());	10✔
48	copy->setMovementSensitivity(this->movementSensitivity());	10✔
49	copy->setSendExtraPress(this->sendExtraPress());	10✔
50	copy->setRange(this->lowerValue(), this->upperValue());	10✔
51
52	return copy;	10✔
53	}
54
55	QLCInputChannel::~QLCInputChannel()	7,856✔
56	{
57	}	7,856✔
58
59	/****************************************************************************
60	* Type
61	****************************************************************************/
62
63	void QLCInputChannel::setType(Type type)	11,954✔
64	{
65	if (type == m_type)	11,954✔
66	return;	7,172✔
67
68	m_type = type;	4,782✔
69	if (type == Encoder)	4,782✔
70	m_movementSensitivity = 1;	52✔
71	else
72	m_movementSensitivity = 20;	4,730✔
73
74	emit typeChanged();	4,782✔
75	}
76
77	QLCInputChannel::Type QLCInputChannel::type() const	807✔
78	{
79	return m_type;	807✔
80	}
81
82	QString QLCInputChannel::typeToString(Type type)	12✔
83	{
84	switch (type)	12✔
85	{
86	case Button:	4✔
87	return KXMLQLCInputChannelButton;	4✔
88	case Knob:	2✔
89	return KXMLQLCInputChannelKnob;	2✔
90	case Encoder:	1✔
91	return KXMLQLCInputChannelEncoder;	1✔
92	case Slider:	1✔
93	return KXMLQLCInputChannelSlider;	1✔
94	case NextPage:	1✔
95	return KXMLQLCInputChannelPageUp;	1✔
96	case PrevPage:	1✔
97	return KXMLQLCInputChannelPageDown;	1✔
98	case PageSet:	1✔
99	return KXMLQLCInputChannelPageSet;	1✔
100	default:	1✔
101	return KXMLQLCInputChannelNone;	1✔
102	}
103	}
104
105	QString QLCInputChannel::typeString()	×
106	{
107	return typeToString(type());	×
108	}
109
110	QLCInputChannel::Type QLCInputChannel::stringToType(const QString& type)	11,943✔
111	{
112	if (type == KXMLQLCInputChannelButton)	11,943✔
113	return Button;	7,165✔
114	else if (type == KXMLQLCInputChannelKnob)	4,778✔
115	return Knob;	1,900✔
116	else if (type == KXMLQLCInputChannelEncoder)	2,878✔
117	return Encoder;	52✔
118	else if (type == KXMLQLCInputChannelSlider)	2,826✔
119	return Slider;	2,803✔
120	else if (type == KXMLQLCInputChannelPageUp)	23✔
121	return NextPage;	10✔
122	else if (type == KXMLQLCInputChannelPageDown)	13✔
123	return PrevPage;	10✔
124	else if (type == KXMLQLCInputChannelPageSet)	3✔
125	return PageSet;	1✔
126	else
127	return NoType;	2✔
128	}
129
130	QStringList QLCInputChannel::types()	1✔
131	{
132	QStringList list;	1✔
133	list << KXMLQLCInputChannelSlider;	1✔
134	list << KXMLQLCInputChannelKnob;	1✔
135	list << KXMLQLCInputChannelEncoder;	1✔
136	list << KXMLQLCInputChannelButton;	1✔
137	list << KXMLQLCInputChannelPageUp;	1✔
138	list << KXMLQLCInputChannelPageDown;	1✔
139	list << KXMLQLCInputChannelPageSet;	1✔
140	return list;	1✔
141	}
142
143	QIcon QLCInputChannel::typeToIcon(Type type)	×
144	{
145	return QIcon(iconResource(type));	×
146	}
147
148	QIcon QLCInputChannel::stringToIcon(const QString& str)	×
149	{
150	return typeToIcon(stringToType(str));	×
151	}
152
153	QString QLCInputChannel::iconResource(Type type, bool svg)	×
154	{
155	QString prefix = svg ? "qrc" : "";	×
156	QString ext = svg ? "svg" : "png";	×
157
158	switch(type)	×
159	{
160	case Button: return QString("%1:/button.%2").arg(prefix, ext);	×
161	case Knob: return QString("%1:/knob.%2").arg(prefix, ext);	×
162	case Encoder: return QString("%1:/knob.%2").arg(prefix, ext);	×
163	case Slider: return QString("%1:/slider.%2").arg(prefix, ext);	×
164	case PrevPage: return QString("%1:/forward.%2").arg(prefix, ext);	×
165	case NextPage: return QString("%1:/back.%2").arg(prefix, ext);	×
166	case PageSet: return QString("%1:/star.%2").arg(prefix, ext);	×
167	default: return QString();	×
168	}
169
170	return QString("%1:/other.%2").arg(prefix, ext);
171	}
172
173	QIcon QLCInputChannel::icon() const	×
174	{
175	return typeToIcon(type());	×
176	}
177
178	/****************************************************************************
179	* Name
180	****************************************************************************/
181
182	void QLCInputChannel::setName(const QString& name)	11,961✔
183	{
184	if (name == m_name)	11,961✔
185	return;	×
186
187	m_name = name;	11,961✔
188
189	emit nameChanged();	11,961✔
190	}
191
192	QString QLCInputChannel::name() const	35✔
193	{
194	return m_name;	35✔
195	}
196
197	/*********************************************************************
198	* Slider/Knob movement behaviour specific methods
199	*********************************************************************/
200
201	QLCInputChannel::MovementType QLCInputChannel::movementType() const	11✔
202	{
203	return m_movementType;	11✔
204	}
205
206	void QLCInputChannel::setMovementType(QLCInputChannel::MovementType type)	10✔
207	{
208	m_movementType = type;	10✔
209	}	10✔
210
211	int QLCInputChannel::movementSensitivity() const	10✔
212	{
213	return m_movementSensitivity;	10✔
214	}
215
216	void QLCInputChannel::setMovementSensitivity(int value)	61✔
217	{
218	m_movementSensitivity = value;	61✔
219	}	61✔
220
221	/*********************************************************************
222	* Button behaviour specific methods
223	*********************************************************************/
224
225	void QLCInputChannel::setSendExtraPress(bool enable)	79✔
226	{
227	if (enable == m_sendExtraPress)	79✔
228	return;	10✔
229
230	m_sendExtraPress = enable;	69✔
231	emit sendExtraPressChanged();	69✔
232	}
233
234	bool QLCInputChannel::sendExtraPress() const	14✔
235	{
236	return m_sendExtraPress;	14✔
237	}
238
239	void QLCInputChannel::setRange(uchar lower, uchar upper)	619✔
240	{
241	setLowerValue(lower);	619✔
242	setUpperValue(upper);	619✔
243	}	619✔
244
245	uchar QLCInputChannel::lowerValue() const	13✔
246	{
247	return m_lower;	13✔
248	}
249
250	void QLCInputChannel::setLowerValue(const uchar value)	619✔
251	{
252	if (value == m_lower)	619✔
253	return;	253✔
254
255	m_lower = value;	366✔
256	emit lowerValueChanged();	366✔
257	}
258
259	uchar QLCInputChannel::upperValue() const	13✔
260	{
261	return m_upper;	13✔
262	}
263
264	void QLCInputChannel::setUpperValue(const uchar value)	619✔
265	{
266	if (value == m_upper)	619✔
267	return;	13✔
268
269	m_upper = value;	606✔
270	emit upperValueChanged();	606✔
271	}
272
273	/****************************************************************************
274	* Load & Save
275	****************************************************************************/
276
277	bool QLCInputChannel::loadXML(QXmlStreamReader &root)	11,935✔
278	{
279	if (root.isStartElement() == false \|\| root.name() != KXMLQLCInputChannel)	11,935✔
280	{
281	qWarning() << Q_FUNC_INFO << "Channel node not found";	×
282	return false;	×
283	}
284
285	while (root.readNextStartElement())	36,534✔
286	{
287	if (root.name() == KXMLQLCInputChannelName)	24,599✔
288	{
289	setName(root.readElementText());	11,935✔
290	}
291	else if (root.name() == KXMLQLCInputChannelType)	12,664✔
292	{
293	setType(stringToType(root.readElementText()));	11,935✔
294	}
295	else if (root.name() == KXMLQLCInputChannelExtraPress)	729✔
296	{
297	root.readElementText();	69✔
298	setSendExtraPress(true);	69✔
299	}
300	else if (root.name() == KXMLQLCInputChannelMovement)	660✔
301	{
302	if (root.attributes().hasAttribute(KXMLQLCInputChannelSensitivity))	51✔
303	setMovementSensitivity(root.attributes().value(KXMLQLCInputChannelSensitivity).toString().toInt());	51✔
304
305	if (root.readElementText() == KXMLQLCInputChannelRelative)	51✔
306	setMovementType(Relative);	×
307	}
308	else if (root.name() == KXMLQLCInputChannelFeedbacks)	609✔
309	{
310	uchar min = 0, max = UCHAR_MAX;	609✔
311
312	if (root.attributes().hasAttribute(KXMLQLCInputChannelLowerValue))	609✔
313	min = uchar(root.attributes().value(KXMLQLCInputChannelLowerValue).toString().toUInt());	366✔
314	if (root.attributes().hasAttribute(KXMLQLCInputChannelUpperValue))	609✔
315	max = uchar(root.attributes().value(KXMLQLCInputChannelUpperValue).toString().toUInt());	606✔
316
317	setRange(min, max);	609✔
318	root.skipCurrentElement();	609✔
319	}
320	else
321	{
322	qWarning() << Q_FUNC_INFO << "Unknown input channel tag" << root.name();	×
323	root.skipCurrentElement();	×
324	}
325	}
326
327	return true;	11,935✔
328	}
329
330	bool QLCInputChannel::saveXML(QXmlStreamWriter *doc, quint32 channelNumber) const	4✔
331	{
332	if (doc == NULL \|\| doc->device() == NULL)	4✔
333	return false;	×
334
335	doc->writeStartElement(KXMLQLCInputChannel);	4✔
336	doc->writeAttribute(KXMLQLCInputChannelNumber,	4✔
337	QString("%1").arg(channelNumber));	8✔
338
339	doc->writeTextElement(KXMLQLCInputChannelName, m_name);	4✔
340	doc->writeTextElement(KXMLQLCInputChannelType, typeToString(m_type));	4✔
341	if (sendExtraPress() == true)	4✔
342	doc->writeTextElement(KXMLQLCInputChannelExtraPress, "True");	×
343
344	/* Save only slider's relative movement */
345	if ((type() == Slider \|\| type() == Knob) && movementType() == Relative)	4✔
346	{
347	doc->writeStartElement(KXMLQLCInputChannelMovement);	×
348	doc->writeAttribute(KXMLQLCInputChannelSensitivity, QString::number(movementSensitivity()));	×
349	doc->writeCharacters(KXMLQLCInputChannelRelative);	×
350	doc->writeEndElement();	×
351	}
352	else if (type() == Encoder)	4✔
353	{
354	doc->writeStartElement(KXMLQLCInputChannelMovement);	×
355	doc->writeAttribute(KXMLQLCInputChannelSensitivity, QString::number(movementSensitivity()));	×
356	doc->writeEndElement();	×
357	}
358	else if (type() == Button && (lowerValue() != 0 \|\| upperValue() != UCHAR_MAX))	4✔
359	{
360	doc->writeStartElement(KXMLQLCInputChannelFeedbacks);	×
361	if (lowerValue() != 0)	×
362	doc->writeAttribute(KXMLQLCInputChannelLowerValue, QString::number(lowerValue()));	×
363	if (upperValue() != UCHAR_MAX)	×
364	doc->writeAttribute(KXMLQLCInputChannelUpperValue, QString::number(upperValue()));	×
365	doc->writeEndElement();	×
366	}
367
368	doc->writeEndElement();	4✔
369	return true;	4✔
370	}

mcallegari / qlcplus / 6683238402

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous