11419549206

Committed 19 Oct 2024 05:45PM UTC coverage: 87.672% (+0.003%) from 87.669%

Build # 11419549206

Build Type

Pull #1869

github

Committed by

web-flow

Commit Message

Merge 23fd9868e into 85e41214f

Pull Request Pull Request #1869: Roll must reduce shift steps by size along axis

Run Details

3077 of 3590 branches covered (85.71%)

Branch coverage included in aggregate %.

10 of 11 new or added lines in 1 file covered. (90.91%)

6 existing lines in 1 file now uncovered.

11715 of 13282 relevant lines covered (88.2%)

7106.53 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

95.67

/dpctl/tensor/_manipulation_functions.py

#                       Data Parallel Control (dpctl)
#
#  Copyright 2020-2024 Intel Corporation
#
#  Licensed under the Apache License, Version 2.0 (the "License");
#  you may not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.


import itertools
import operator

import numpy as np

import dpctl
import dpctl.tensor as dpt
import dpctl.tensor._tensor_impl as ti
import dpctl.utils as dputils

from ._copy_utils import _broadcast_strides
from ._numpy_helper import normalize_axis_index, normalize_axis_tuple
from ._type_utils import _supported_dtype, _to_device_supported_dtype

__doc__ = (
    "Implementation module for array manipulation "
    "functions in :module:`dpctl.tensor`"
)


def _broadcast_shape_impl(shapes):
    if len(set(shapes)) == 1:
        return shapes[0]
    mutable_shapes = False
    nds = [len(s) for s in shapes]
    biggest = max(nds)
    sh_len = len(shapes)
    for i in range(sh_len):
        diff = biggest - nds[i]
        if diff > 0:
            ty = type(shapes[i])
            shapes[i] = ty(
                itertools.chain(itertools.repeat(1, diff), shapes[i])
            )
    common_shape = []
    for axis in range(biggest):
        lengths = [s[axis] for s in shapes]
        unique = set(lengths + [1])
        if len(unique) > 2:
            raise ValueError(
                "Shape mismatch: two or more arrays have "
                f"incompatible dimensions on axis ({axis},)"
            )
        elif len(unique) == 2:
            unique.remove(1)
            new_length = unique.pop()
            common_shape.append(new_length)
            for i in range(sh_len):
                if shapes[i][axis] == 1:
                    if not mutable_shapes:
                        shapes = [list(s) for s in shapes]
                        mutable_shapes = True
                    shapes[i][axis] = new_length
        else:
            common_shape.append(1)

    return tuple(common_shape)


def _broadcast_shapes(*args):
    """
    Broadcast the input shapes into a single shape;
    returns tuple broadcasted shape.
    """
    array_shapes = [array.shape for array in args]
    return _broadcast_shape_impl(array_shapes)


def permute_dims(X, /, axes):
    """permute_dims(x, axes)

    Permute the axes (dimensions) of an array; returns the permuted
    array as a view.

    Args:
        x (usm_ndarray): input array.
        axes (Tuple[int, ...]): tuple containing permutation of
           `(0,1,...,N-1)` where `N` is the number of axes (dimensions)
           of `x`.
    Returns:
        usm_ndarray:
            An array with permuted axes.
            The returned array must has the same data type as `x`,
            is created on the same device as `x` and has the same USM allocation
            type as `x`.
    """
    if not isinstance(X, dpt.usm_ndarray):
        raise TypeError(f"Expected usm_ndarray type, got {type(X)}.")
    axes = normalize_axis_tuple(axes, X.ndim, "axes")
    if not X.ndim == len(axes):
        raise ValueError(
            "The length of the passed axes does not match "
            "to the number of usm_ndarray dimensions."
        )
    newstrides = tuple(X.strides[i] for i in axes)
    newshape = tuple(X.shape[i] for i in axes)
    return dpt.usm_ndarray(
        shape=newshape,
        dtype=X.dtype,
        buffer=X,
        strides=newstrides,
        offset=X._element_offset,
    )


def expand_dims(X, /, *, axis=0):
    """expand_dims(x, axis)

    Expands the shape of an array by inserting a new axis (dimension)
    of size one at the position specified by axis.

    Args:
        x (usm_ndarray):
            input array
        axis (Union[int, Tuple[int]]):
            axis position in the expanded axes (zero-based). If `x` has rank
            (i.e, number of dimensions) `N`, a valid `axis` must reside
            in the closed-interval `[-N-1, N]`. If provided a negative
            `axis`, the `axis` position at which to insert a singleton
            dimension is computed as `N + axis + 1`. Hence, if
            provided `-1`, the resolved axis position is `N` (i.e.,
            a singleton dimension must be appended to the input array `x`).
            If provided `-N-1`, the resolved axis position is `0` (i.e., a
            singleton dimension is prepended to the input array `x`).

    Returns:
        usm_ndarray:
            Returns a view, if possible, and a copy otherwise with the number
            of dimensions increased.
            The expanded array has the same data type as the input array `x`.
            The expanded array is located on the same device as the input
            array, and has the same USM allocation type.

    Raises:
        IndexError: if `axis` value is invalid.
    """
    if not isinstance(X, dpt.usm_ndarray):
        raise TypeError(f"Expected usm_ndarray type, got {type(X)}.")

    if type(axis) not in (tuple, list):
        axis = (axis,)

    out_ndim = len(axis) + X.ndim
    axis = normalize_axis_tuple(axis, out_ndim)

    shape_it = iter(X.shape)
    shape = tuple(1 if ax in axis else next(shape_it) for ax in range(out_ndim))

    return dpt.reshape(X, shape)


def squeeze(X, /, axis=None):
    """squeeze(x, axis)

    Removes singleton dimensions (axes) from array `x`.

    Args:
        x (usm_ndarray): input array
        axis (Union[int, Tuple[int,...]]): axis (or axes) to squeeze.

    Returns:
        usm_ndarray:
            Output array is a view, if possible,
            and a copy otherwise, but with all or a subset of the
            dimensions of length 1 removed. Output has the same data
            type as the input, is allocated on the same device as the
            input and has the same USM allocation type as the input
            array `x`.

    Raises:
        ValueError: if the specified axis has a size greater than one.
    """
    if not isinstance(X, dpt.usm_ndarray):
        raise TypeError(f"Expected usm_ndarray type, got {type(X)}.")
    X_shape = X.shape
    if axis is not None:
        axis = normalize_axis_tuple(axis, X.ndim if X.ndim != 0 else X.ndim + 1)
        new_shape = []
        for i, x in enumerate(X_shape):
            if i not in axis:
                new_shape.append(x)
            else:
                if x != 1:
                    raise ValueError(
                        "Cannot select an axis to squeeze out "
                        "which has size not equal to one."
                    )
        new_shape = tuple(new_shape)
    else:
        new_shape = tuple(axis for axis in X_shape if axis != 1)
    if new_shape == X.shape:
        return X
    else:
        return dpt.reshape(X, new_shape)


def broadcast_to(X, /, shape):
    """broadcast_to(x, shape)

    Broadcast an array to a new `shape`; returns the broadcasted
    :class:`dpctl.tensor.usm_ndarray` as a view.

    Args:
        x (usm_ndarray): input array
        shape (Tuple[int,...]): array shape. The `shape` must be
            compatible with `x` according to broadcasting rules.

    Returns:
        usm_ndarray:
            An array with the specified `shape`.
            The output array is a view of the input array, and
            hence has the same data type, USM allocation type and
            device attributes.
    """
    if not isinstance(X, dpt.usm_ndarray):
        raise TypeError(f"Expected usm_ndarray type, got {type(X)}.")

    # Use numpy.broadcast_to to check the validity of the input
    # parameter 'shape'. Raise ValueError if 'X' is not compatible
    # with 'shape' according to NumPy's broadcasting rules.
    new_array = np.broadcast_to(
        np.broadcast_to(np.empty(tuple(), dtype="u1"), X.shape), shape
    )
    new_sts = _broadcast_strides(X.shape, X.strides, new_array.ndim)
    return dpt.usm_ndarray(
        shape=new_array.shape,
        dtype=X.dtype,
        buffer=X,
        strides=new_sts,
        offset=X._element_offset,
    )


def broadcast_arrays(*args):
    """broadcast_arrays(*arrays)

    Broadcasts one or more :class:`dpctl.tensor.usm_ndarrays` against
    one another.

    Args:
        arrays (usm_ndarray): an arbitrary number of arrays to be
            broadcasted.

    Returns:
        List[usm_ndarray]:
            A list of broadcasted arrays. Each array
            must have the same shape. Each array must have the same `dtype`,
            `device` and `usm_type` attributes as its corresponding input
            array.
    """
    if len(args) == 0:
        raise ValueError("`broadcast_arrays` requires at least one argument")
    for X in args:
        if not isinstance(X, dpt.usm_ndarray):
            raise TypeError(f"Expected usm_ndarray type, got {type(X)}.")

    shape = _broadcast_shapes(*args)

    if all(X.shape == shape for X in args):
        return args

    return [broadcast_to(X, shape) for X in args]


def flip(X, /, *, axis=None):
    """flip(x, axis)

    Reverses the order of elements in an array `x` along the given `axis`.
    The shape of the array is preserved, but the elements are reordered.

    Args:
        x (usm_ndarray): input array.
        axis (Optional[Union[int, Tuple[int,...]]]): axis (or axes) along
            which to flip.
            If `axis` is `None`, all input array axes are flipped.
            If `axis` is negative, the flipped axis is counted from the
            last dimension. If provided more than one axis, only the specified
            axes are flipped. Default: `None`.

    Returns:
        usm_ndarray:
            A view of `x` with the entries of `axis` reversed.
    """
    if not isinstance(X, dpt.usm_ndarray):
        raise TypeError(f"Expected usm_ndarray type, got {type(X)}.")
    X_ndim = X.ndim
    if axis is None:
        indexer = (np.s_[::-1],) * X_ndim
    else:
        axis = normalize_axis_tuple(axis, X_ndim)
        indexer = tuple(
            np.s_[::-1] if i in axis else np.s_[:] for i in range(X.ndim)
        )
    return X[indexer]


def roll(x, /, shift, *, axis=None):
    """
    roll(x, shift, axis)

    Rolls array elements along a specified axis.
    Array elements that roll beyond the last position are re-introduced
    at the first position. Array elements that roll beyond the first position
    are re-introduced at the last position.

    Args:
        x (usm_ndarray): input array
        shift (Union[int, Tuple[int,...]]): number of places by which the
            elements are shifted. If `shift` is a tuple, then `axis` must be a
            tuple of the same size, and each of the given axes must be shifted
            by the corresponding element in `shift`. If `shift` is an `int`
            and `axis` a tuple, then the same `shift` must be used for all
            specified axes. If a `shift` is positive, then array elements is
            shifted positively (toward larger indices) along the dimension of
            `axis`.
            If a `shift` is negative, then array elements must be shifted
            negatively (toward smaller indices) along the dimension of `axis`.
        axis (Optional[Union[int, Tuple[int,...]]]): axis (or axes) along which
            elements to shift. If `axis` is `None`, the array is
            flattened, shifted, and then restored to its original shape.
            Default: `None`.

    Returns:
        usm_ndarray:
            An array having the same `dtype`, `usm_type` and
            `device` attributes as `x` and whose elements are shifted relative
            to `x`.
    """
    if not isinstance(x, dpt.usm_ndarray):
        raise TypeError(f"Expected usm_ndarray type, got {type(x)}.")
    exec_q = x.sycl_queue
    _manager = dputils.SequentialOrderManager[exec_q]
    if axis is None:
        shift = operator.index(shift)
        res = dpt.empty(
            x.shape, dtype=x.dtype, usm_type=x.usm_type, sycl_queue=exec_q
        )
        sz = x.size
        shift = (shift % sz) if sz > 0 else 0
        dep_evs = _manager.submitted_events
        hev, roll_ev = ti._copy_usm_ndarray_for_roll_1d(
            src=x,
            dst=res,
            shift=shift,
            sycl_queue=exec_q,
            depends=dep_evs,
        )
        _manager.add_event_pair(hev, roll_ev)
        return res
    axis = normalize_axis_tuple(axis, x.ndim, allow_duplicate=True)
    broadcasted = np.broadcast(shift, axis)
    if broadcasted.ndim > 1:
        raise ValueError("'shift' and 'axis' should be scalars or 1D sequences")
    shifts = [
        0,
    ] * x.ndim
    shape = x.shape
    for sh, ax in broadcasted:
        n_i = shape[ax]
        shifts[ax] = (int(shifts[ax] + sh) % int(n_i)) if n_i > 0 else 0
    res = dpt.empty(
        x.shape, dtype=x.dtype, usm_type=x.usm_type, sycl_queue=exec_q
    )
    dep_evs = _manager.submitted_events
    ht_e, roll_ev = ti._copy_usm_ndarray_for_roll_nd(
        src=x, dst=res, shifts=shifts, sycl_queue=exec_q, depends=dep_evs
    )
    _manager.add_event_pair(ht_e, roll_ev)
    return res


def _arrays_validation(arrays, check_ndim=True):
    n = len(arrays)
    if n == 0:
        raise TypeError("Missing 1 required positional argument: 'arrays'.")

    if not isinstance(arrays, (list, tuple)):
        raise TypeError(f"Expected tuple or list type, got {type(arrays)}.")

    for X in arrays:
        if not isinstance(X, dpt.usm_ndarray):
            raise TypeError(f"Expected usm_ndarray type, got {type(X)}.")

    exec_q = dputils.get_execution_queue([X.sycl_queue for X in arrays])
    if exec_q is None:
        raise ValueError("All the input arrays must have same sycl queue.")

    res_usm_type = dputils.get_coerced_usm_type([X.usm_type for X in arrays])
    if res_usm_type is None:
        raise ValueError("All the input arrays must have usm_type.")

    X0 = arrays[0]
    _supported_dtype(Xi.dtype for Xi in arrays)

    res_dtype = X0.dtype
    dev = exec_q.sycl_device
    for i in range(1, n):
        res_dtype = np.promote_types(res_dtype, arrays[i])
        res_dtype = _to_device_supported_dtype(res_dtype, dev)

    if check_ndim:
        for i in range(1, n):
            if X0.ndim != arrays[i].ndim:
                raise ValueError(
                    "All the input arrays must have same number of dimensions, "
                    f"but the array at index 0 has {X0.ndim} dimension(s) and "
                    f"the array at index {i} has {arrays[i].ndim} dimension(s)."
                )
    return res_dtype, res_usm_type, exec_q


def _check_same_shapes(X0_shape, axis, n, arrays):
    for i in range(1, n):
        Xi_shape = arrays[i].shape
        for j, X0j in enumerate(X0_shape):
            if X0j != Xi_shape[j] and j != axis:
                raise ValueError(
                    "All the input array dimensions for the concatenation "
                    f"axis must match exactly, but along dimension {j}, the "
                    f"array at index 0 has size {X0j} and the array "
                    f"at index {i} has size {Xi_shape[j]}."
                )


def _concat_axis_None(arrays):
    "Implementation of concat(arrays, axis=None)."
    res_dtype, res_usm_type, exec_q = _arrays_validation(
        arrays, check_ndim=False
    )
    res_shape = 0
    for array in arrays:
        res_shape += array.size
    res = dpt.empty(
        res_shape, dtype=res_dtype, usm_type=res_usm_type, sycl_queue=exec_q
    )

    fill_start = 0
    _manager = dputils.SequentialOrderManager[exec_q]
    deps = _manager.submitted_events
    for array in arrays:
        fill_end = fill_start + array.size
        if array.flags.c_contiguous:
            hev, cpy_ev = ti._copy_usm_ndarray_into_usm_ndarray(
                src=dpt.reshape(array, -1),
                dst=res[fill_start:fill_end],
                sycl_queue=exec_q,
                depends=deps,
            )
            _manager.add_event_pair(hev, cpy_ev)
        else:
            src_ = array
            # _copy_usm_ndarray_for_reshape requires src and dst to have
            # the same data type
            if not array.dtype == res_dtype:
                src2_ = dpt.empty_like(src_, dtype=res_dtype)
                ht_copy_ev, cpy_ev = ti._copy_usm_ndarray_into_usm_ndarray(
                    src=src_, dst=src2_, sycl_queue=exec_q, depends=deps
                )
                _manager.add_event_pair(ht_copy_ev, cpy_ev)
                hev, reshape_copy_ev = ti._copy_usm_ndarray_for_reshape(
                    src=src2_,
                    dst=res[fill_start:fill_end],
                    sycl_queue=exec_q,
                    depends=[cpy_ev],
                )
                _manager.add_event_pair(hev, reshape_copy_ev)
            else:
                hev, cpy_ev = ti._copy_usm_ndarray_for_reshape(
                    src=src_,
                    dst=res[fill_start:fill_end],
                    sycl_queue=exec_q,
                    depends=deps,
                )
                _manager.add_event_pair(hev, cpy_ev)
        fill_start = fill_end

    return res


def concat(arrays, /, *, axis=0):
    """concat(arrays, axis)

    Joins a sequence of arrays along an existing axis.

    Args:
        arrays (Union[List[usm_ndarray, Tuple[usm_ndarray,...]]]):
            input arrays to join. The arrays must have the same shape,
            except in the dimension specified by `axis`.
        axis (Optional[int]): axis along which the arrays will be joined.
            If `axis` is `None`, arrays must be flattened before
            concatenation. If `axis` is negative, it is understood as
            being counted from the last dimension. Default: `0`.

    Returns:
        usm_ndarray:
            An output array containing the concatenated
            values. The output array data type is determined by Type
            Promotion Rules of array API.

    All input arrays must have the same device attribute. The output array
    is allocated on that same device, and data movement operations are
    scheduled on a queue underlying the device. The USM allocation type
    of the output array is determined by USM allocation type promotion
    rules.
    """
    if axis is None:
        return _concat_axis_None(arrays)

    res_dtype, res_usm_type, exec_q = _arrays_validation(arrays)
    n = len(arrays)
    X0 = arrays[0]

    axis = normalize_axis_index(axis, X0.ndim)
    X0_shape = X0.shape
    _check_same_shapes(X0_shape, axis, n, arrays)

    res_shape_axis = 0
    for X in arrays:
        res_shape_axis = res_shape_axis + X.shape[axis]

    res_shape = tuple(
        X0_shape[i] if i != axis else res_shape_axis for i in range(X0.ndim)
    )

    res = dpt.empty(
        res_shape, dtype=res_dtype, usm_type=res_usm_type, sycl_queue=exec_q
    )

    _manager = dputils.SequentialOrderManager[exec_q]
    deps = _manager.submitted_events
    fill_start = 0
    for i in range(n):
        fill_end = fill_start + arrays[i].shape[axis]
        c_shapes_copy = tuple(
            np.s_[fill_start:fill_end] if j == axis else np.s_[:]
            for j in range(X0.ndim)
        )
        hev, cpy_ev = ti._copy_usm_ndarray_into_usm_ndarray(
            src=arrays[i],
            dst=res[c_shapes_copy],
            sycl_queue=exec_q,
            depends=deps,
        )
        _manager.add_event_pair(hev, cpy_ev)
        fill_start = fill_end

    return res


def stack(arrays, /, *, axis=0):
    """
    stack(arrays, axis)

    Joins a sequence of arrays along a new axis.

    Args:
        arrays (Union[List[usm_ndarray], Tuple[usm_ndarray,...]]):
            input arrays to join. Each array must have the same shape.
        axis (int): axis along which the arrays will be joined. Providing
            an `axis` specified the index of the new axis in the dimensions
            of the output array. A valid axis must be on the interval
            `[-N, N)`, where `N` is the rank (number of dimensions) of `x`.
            Default: `0`.

    Returns:
        usm_ndarray:
            An output array having rank `N+1`, where `N` is
            the rank (number of dimensions) of `x`. If the input arrays have
            different data types, array API Type Promotion Rules apply.

    Raises:
        ValueError: if not all input arrays have the same shape
        IndexError: if provided an `axis` outside of the required interval.
    """
    res_dtype, res_usm_type, exec_q = _arrays_validation(arrays)

    n = len(arrays)
    X0 = arrays[0]
    res_ndim = X0.ndim + 1
    axis = normalize_axis_index(axis, res_ndim)
    X0_shape = X0.shape

    for i in range(1, n):
        if X0_shape != arrays[i].shape:
            raise ValueError("All input arrays must have the same shape")

    res_shape = tuple(
        X0_shape[i - 1 * (i >= axis)] if i != axis else n
        for i in range(res_ndim)
    )

    res = dpt.empty(
        res_shape, dtype=res_dtype, usm_type=res_usm_type, sycl_queue=exec_q
    )

    _manager = dputils.SequentialOrderManager[exec_q]
    dep_evs = _manager.submitted_events
    for i in range(n):
        c_shapes_copy = tuple(
            i if j == axis else np.s_[:] for j in range(res_ndim)
        )
        _dst = res[c_shapes_copy]
        hev, cpy_ev = ti._copy_usm_ndarray_into_usm_ndarray(
            src=arrays[i], dst=_dst, sycl_queue=exec_q, depends=dep_evs
        )
        _manager.add_event_pair(hev, cpy_ev)

    return res


def unstack(X, /, *, axis=0):
    """unstack(x, axis=0)

    Splits an array in a sequence of arrays along the given axis.

    Args:
        x (usm_ndarray): input array

        axis (int, optional): axis along which `x` is unstacked.
            If `x` has rank (i.e, number of dimensions) `N`,
            a valid `axis` must reside in the half-open interval `[-N, N)`.
            Default: `0`.

    Returns:
        Tuple[usm_ndarray,...]:
            Output sequence of arrays which are views into the input array.

    Raises:
        AxisError: if the `axis` value is invalid.
    """
    if not isinstance(X, dpt.usm_ndarray):
        raise TypeError(f"Expected usm_ndarray type, got {type(X)}.")

    axis = normalize_axis_index(axis, X.ndim)
    Y = dpt.moveaxis(X, axis, 0)

    return tuple(Y[i] for i in range(Y.shape[0]))


def moveaxis(X, source, destination, /):
    """moveaxis(x, source, destination)

    Moves axes of an array to new positions.

    Args:
        x (usm_ndarray): input array

        source (int or a sequence of int):
            Original positions of the axes to move.
            These must be unique. If `x` has rank (i.e., number of
            dimensions) `N`, a valid `axis` must be in the
            half-open interval `[-N, N)`.

        destination (int or a sequence of int):
            Destination positions for each of the original axes.
            These must also be unique. If `x` has rank
            (i.e., number of dimensions) `N`, a valid `axis` must be
            in the half-open interval `[-N, N)`.

    Returns:
        usm_ndarray:
            Array with moved axes.
            The returned array must has the same data type as `x`,
            is created on the same device as `x` and has the same
            USM allocation type as `x`.

    Raises:
        AxisError: if `axis` value is invalid.
        ValueError: if `src` and `dst` have not equal number of elements.
    """
    if not isinstance(X, dpt.usm_ndarray):
        raise TypeError(f"Expected usm_ndarray type, got {type(X)}.")

    source = normalize_axis_tuple(source, X.ndim, "source")
    destination = normalize_axis_tuple(destination, X.ndim, "destination")

    if len(source) != len(destination):
        raise ValueError(
            "`source` and `destination` arguments must have "
            "the same number of elements"
        )

    ind = [n for n in range(X.ndim) if n not in source]

    for src, dst in sorted(zip(destination, source)):
        ind.insert(src, dst)

    return dpt.permute_dims(X, tuple(ind))


def swapaxes(X, axis1, axis2):
    """swapaxes(x, axis1, axis2)

    Interchanges two axes of an array.

    Args:
        x (usm_ndarray): input array

        axis1 (int): First axis.
            If `x` has rank (i.e., number of dimensions) `N`,
            a valid `axis` must be in the half-open interval `[-N, N)`.

        axis2 (int): Second axis.
            If `x` has rank (i.e., number of dimensions) `N`,
            a valid `axis` must be in the half-open interval `[-N, N)`.

    Returns:
        usm_ndarray:
            Array with swapped axes.
            The returned array must has the same data type as `x`,
            is created on the same device as `x` and has the same USM
            allocation type as `x`.

    Raises:
        AxisError: if `axis` value is invalid.
    """
    if not isinstance(X, dpt.usm_ndarray):
        raise TypeError(f"Expected usm_ndarray type, got {type(X)}.")

    axis1 = normalize_axis_index(axis1, X.ndim, "axis1")
    axis2 = normalize_axis_index(axis2, X.ndim, "axis2")

    ind = list(range(0, X.ndim))
    ind[axis1] = axis2
    ind[axis2] = axis1
    return dpt.permute_dims(X, tuple(ind))


def repeat(x, repeats, /, *, axis=None):
    """repeat(x, repeats, axis=None)

    Repeat elements of an array on a per-element basis.

    Args:
        x (usm_ndarray): input array

        repeats (Union[int, Sequence[int, ...], usm_ndarray]):
            The number of repetitions for each element.

            `repeats` must be broadcast-compatible with `N` where `N` is
            `prod(x.shape)` if `axis` is `None` and `x.shape[axis]`
            otherwise.

            If `repeats` is an array, it must have an integer data type.
            Otherwise, `repeats` must be a Python integer or sequence of
            Python integers (i.e., a tuple, list, or range).

        axis (Optional[int]):
            The axis along which to repeat values. If `axis` is `None`, the
            function repeats elements of the flattened array. Default: `None`.

    Returns:
        usm_ndarray:
            output array with repeated elements.

            If `axis` is `None`, the returned array is one-dimensional,
            otherwise, it has the same shape as `x`, except for the axis along
            which elements were repeated.

            The returned array will have the same data type as `x`.
            The returned array will be located on the same device as `x` and
            have the same USM allocation type as `x`.

    Raises:
        AxisError: if `axis` value is invalid.
    """
    if not isinstance(x, dpt.usm_ndarray):
        raise TypeError(f"Expected usm_ndarray type, got {type(x)}.")

    x_ndim = x.ndim
    x_shape = x.shape
    if axis is not None:
        axis = normalize_axis_index(operator.index(axis), x_ndim)
        axis_size = x_shape[axis]
    else:
        axis_size = x.size

    scalar = False
    if isinstance(repeats, int):
        if repeats < 0:
            raise ValueError("`repeats` must be a positive integer")
        usm_type = x.usm_type
        exec_q = x.sycl_queue
        scalar = True
    elif isinstance(repeats, dpt.usm_ndarray):
        if repeats.ndim > 1:
            raise ValueError(
                "`repeats` array must be 0- or 1-dimensional, got "
                f"{repeats.ndim}"
            )
        exec_q = dpctl.utils.get_execution_queue(
            (x.sycl_queue, repeats.sycl_queue)
        )
        if exec_q is None:
            raise dputils.ExecutionPlacementError(
                "Execution placement can not be unambiguously inferred "
                "from input arguments."
            )
        usm_type = dpctl.utils.get_coerced_usm_type(
            (
                x.usm_type,
                repeats.usm_type,
            )
        )
        dpctl.utils.validate_usm_type(usm_type, allow_none=False)
        if not dpt.can_cast(repeats.dtype, dpt.int64, casting="same_kind"):
            raise TypeError(
                f"'repeats' data type {repeats.dtype} cannot be cast to "
                "'int64' according to the casting rule ''safe.''"
            )
        if repeats.size == 1:
            scalar = True
            # bring the single element to the host
            repeats = int(repeats)
            if repeats < 0:
                raise ValueError("`repeats` elements must be positive")
        else:
            if repeats.size != axis_size:
                raise ValueError(
                    "'repeats' array must be broadcastable to the size of "
                    "the repeated axis"
                )
            if not dpt.all(repeats >= 0):
                raise ValueError("'repeats' elements must be positive")

    elif isinstance(repeats, (tuple, list, range)):
        usm_type = x.usm_type
        exec_q = x.sycl_queue

        len_reps = len(repeats)
        if len_reps == 1:
            repeats = repeats[0]
            if repeats < 0:
                raise ValueError("`repeats` elements must be positive")
            scalar = True
        else:
            if len_reps != axis_size:
                raise ValueError(
                    "`repeats` sequence must have the same length as the "
                    "repeated axis"
                )
            repeats = dpt.asarray(
                repeats, dtype=dpt.int64, usm_type=usm_type, sycl_queue=exec_q
            )
            if not dpt.all(repeats >= 0):
                raise ValueError("`repeats` elements must be positive")
    else:
        raise TypeError(
            "Expected int, sequence, or `usm_ndarray` for second argument,"
            f"got {type(repeats)}"
        )

    _manager = dputils.SequentialOrderManager[exec_q]
    dep_evs = _manager.submitted_events
    if scalar:
        res_axis_size = repeats * axis_size
        if axis is not None:
            res_shape = x_shape[:axis] + (res_axis_size,) + x_shape[axis + 1 :]
        else:
            res_shape = (res_axis_size,)
        res = dpt.empty(
            res_shape, dtype=x.dtype, usm_type=usm_type, sycl_queue=exec_q
        )
        if res_axis_size > 0:
            ht_rep_ev, rep_ev = ti._repeat_by_scalar(
                src=x,
                dst=res,
                reps=repeats,
                axis=axis,
                sycl_queue=exec_q,
                depends=dep_evs,
            )
            _manager.add_event_pair(ht_rep_ev, rep_ev)
    else:
        if repeats.dtype != dpt.int64:
            rep_buf = dpt.empty(
                repeats.shape,
                dtype=dpt.int64,
                usm_type=usm_type,
                sycl_queue=exec_q,
            )
            ht_copy_ev, copy_ev = ti._copy_usm_ndarray_into_usm_ndarray(
                src=repeats, dst=rep_buf, sycl_queue=exec_q, depends=dep_evs
            )
            _manager.add_event_pair(ht_copy_ev, copy_ev)
            cumsum = dpt.empty(
                (axis_size,),
                dtype=dpt.int64,
                usm_type=usm_type,
                sycl_queue=exec_q,
            )
            # _cumsum_1d synchronizes so `depends` ends here safely
            res_axis_size = ti._cumsum_1d(
                rep_buf, cumsum, sycl_queue=exec_q, depends=[copy_ev]
            )
            if axis is not None:
                res_shape = (
                    x_shape[:axis] + (res_axis_size,) + x_shape[axis + 1 :]
                )
            else:
                res_shape = (res_axis_size,)
            res = dpt.empty(
                res_shape,
                dtype=x.dtype,
                usm_type=usm_type,
                sycl_queue=exec_q,
            )
            if res_axis_size > 0:
                ht_rep_ev, rep_ev = ti._repeat_by_sequence(
                    src=x,
                    dst=res,
                    reps=rep_buf,
                    cumsum=cumsum,
                    axis=axis,
                    sycl_queue=exec_q,
                )
                _manager.add_event_pair(ht_rep_ev, rep_ev)
        else:
            cumsum = dpt.empty(
                (axis_size,),
                dtype=dpt.int64,
                usm_type=usm_type,
                sycl_queue=exec_q,
            )
            res_axis_size = ti._cumsum_1d(
                repeats, cumsum, sycl_queue=exec_q, depends=dep_evs
            )
            if axis is not None:
                res_shape = (
                    x_shape[:axis] + (res_axis_size,) + x_shape[axis + 1 :]
                )
            else:
                res_shape = (res_axis_size,)
            res = dpt.empty(
                res_shape,
                dtype=x.dtype,
                usm_type=usm_type,
                sycl_queue=exec_q,
            )
            if res_axis_size > 0:
                ht_rep_ev, rep_ev = ti._repeat_by_sequence(
                    src=x,
                    dst=res,
                    reps=repeats,
                    cumsum=cumsum,
                    axis=axis,
                    sycl_queue=exec_q,
                )
                _manager.add_event_pair(ht_rep_ev, rep_ev)
    return res


def tile(x, repetitions, /):
    """tile(x, repetitions)

    Repeat an input array `x` along each axis a number of times given by
    `repetitions`.

    For `N` = len(`repetitions`) and `M` = len(`x.shape`):

        * If `M < N`, `x` will have `N - M` new axes prepended to its shape
        * If `M > N`, `repetitions` will have `M - N` ones prepended to it

    Args:
        x (usm_ndarray): input array

        repetitions (Union[int, Tuple[int, ...]]):
            The number of repetitions along each dimension of `x`.

    Returns:
        usm_ndarray:
            tiled output array.

            The returned array will have rank `max(M, N)`. If `S` is the
            shape of `x` after prepending dimensions and `R` is
            `repetitions` after prepending ones, then the shape of the
            result will be `S[i] * R[i]` for each dimension `i`.

            The returned array will have the same data type as `x`.
            The returned array will be located on the same device as `x` and
            have the same USM allocation type as `x`.
    """
    if not isinstance(x, dpt.usm_ndarray):
        raise TypeError(f"Expected usm_ndarray type, got {type(x)}.")

    if not isinstance(repetitions, tuple):
        if isinstance(repetitions, int):
            repetitions = (repetitions,)
        else:
            raise TypeError(
                f"Expected tuple or integer type, got {type(repetitions)}."
            )

    rep_dims = len(repetitions)
    x_dims = x.ndim
    if rep_dims < x_dims:
        repetitions = (x_dims - rep_dims) * (1,) + repetitions
    elif x_dims < rep_dims:
        x = dpt.reshape(x, (rep_dims - x_dims) * (1,) + x.shape)
    res_shape = tuple(map(lambda sh, rep: sh * rep, x.shape, repetitions))
    # case of empty input
    if x.size == 0:
        return dpt.empty(
            res_shape,
            dtype=x.dtype,
            usm_type=x.usm_type,
            sycl_queue=x.sycl_queue,
        )
    in_sh = x.shape
    if res_shape == in_sh:
        return dpt.copy(x)
    expanded_sh = []
    broadcast_sh = []
    out_sz = 1
    for i in range(len(res_shape)):
        out_sz *= res_shape[i]
        reps, sh = repetitions[i], in_sh[i]
        if reps == 1:
            # dimension will be unchanged
            broadcast_sh.append(sh)
            expanded_sh.append(sh)
        elif sh == 1:
            # dimension will be broadcast
            broadcast_sh.append(reps)
            expanded_sh.append(sh)
        else:
            broadcast_sh.extend([reps, sh])
            expanded_sh.extend([1, sh])
    exec_q = x.sycl_queue
    xdt = x.dtype
    xut = x.usm_type
    res = dpt.empty((out_sz,), dtype=xdt, usm_type=xut, sycl_queue=exec_q)
    # no need to copy data for empty output
    if out_sz > 0:
        x = dpt.broadcast_to(
            # this reshape should never copy
            dpt.reshape(x, expanded_sh),
            broadcast_sh,
        )
        # copy broadcast input into flat array
        _manager = dputils.SequentialOrderManager[exec_q]
        dep_evs = _manager.submitted_events
        hev, cp_ev = ti._copy_usm_ndarray_for_reshape(
            src=x, dst=res, sycl_queue=exec_q, depends=dep_evs
        )
        _manager.add_event_pair(hev, cp_ev)
    return dpt.reshape(res, res_shape)

IntelPython / dpctl / 11419549206

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous