9778506695

Committed 03 Jul 2024 01:10PM UTC coverage: 73.935% (-0.02%) from 73.951%

Build # 9778506695

Build Type

push

github

Committed by

web-flow

Commit Message

[bugfix] Move circular imports to `TYPE_CHECKING` blocks (backport #5586) (#5649)

[bugfix] Move circular imports to `TYPE_CHECKING` blocks (#5586)

* [bugfix] Move circular imports to TYPE_CHECKING blocks

* Update

(cherry picked from commit d7a30a18b)

Co-authored-by: Hailin Wang <hailin.wang@connect.polyu.hk>

Run Details

17 of 23 new or added lines in 6 files covered. (73.91%)

7 existing lines in 1 file now uncovered.

24167 of 32687 relevant lines covered (73.93%)

0.74 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

75.36

/src/abaqus/Part/PartBase.py

from __future__ import annotations

from typing import TYPE_CHECKING, Sequence, overload

from typing_extensions import Literal

from abqpy.decorators import abaqus_method_doc

from ..BasicGeometry.Cell import Cell
from ..BasicGeometry.CellArray import CellArray
from ..BasicGeometry.Edge import Edge
from ..BasicGeometry.EdgeArray import EdgeArray
from ..BasicGeometry.Face import Face
from ..BasicGeometry.FaceArray import FaceArray
from ..BasicGeometry.IgnoredEdgeArray import IgnoredEdgeArray
from ..BasicGeometry.IgnoredVertexArray import IgnoredVertexArray
from ..BasicGeometry.ReferencePoints import ReferencePoints
from ..BasicGeometry.Vertex import Vertex
from ..BasicGeometry.VertexArray import VertexArray
from ..Datum.Datum import Datum
from ..EngineeringFeature.EngineeringFeature import EngineeringFeature
from ..Mesh.MeshEdge import MeshEdge
from ..Mesh.MeshEdgeArray import MeshEdgeArray
from ..Mesh.MeshElement import MeshElement
from ..Mesh.MeshElementArray import MeshElementArray
from ..Mesh.MeshFace import MeshFace
from ..Mesh.MeshFaceArray import MeshFaceArray
from ..Mesh.MeshNode import MeshNode
from ..Mesh.MeshNodeArray import MeshNodeArray
from ..Property.CompositeLayup import CompositeLayup
from ..Property.MaterialOrientationArray import MaterialOrientationArray
from ..Property.SectionAssignmentArray import SectionAssignmentArray
from ..Region.Set import Set
from ..Region.Skin import Skin
from ..Region.Stringer import Stringer
from ..Region.Surface import Surface
from ..Sketcher.ConstrainedSketch import ConstrainedSketch
from ..UtilityAndView.abaqusConstants import (
    ALL_EDGES,
    BOUNDARY_ONLY,
    FALSE,
    GEOMETRY,
    LOW,
    NONE,
    OFF,
    ON,
    UNDEFORMED,
    Boolean,
    SymbolicConstant,
)
from ..UtilityAndView.abaqusConstants import abaqusConstants as C
from .AcisFile import AcisFile
from .PartFeature import PartFeature

if TYPE_CHECKING:
    from ..Assembly.PartInstance import PartInstance


class PartBase(PartFeature):
    """The Part object defines the physical attributes of a structure. Parts are instanced into the assembly and
    positioned before an analysis.

    .. note::
        This object can be accessed by::

            import part
            mdb.models[name].parts[name]
    """

    #: A Boolean specifying the validity of the geometry of the part. The value is computed,
    #: but it can be set to ON to perform feature and mesh operations on an invalid part. There
    #: is no guarantee that such operations will work if the part was originally invalid.
    geometryValidity: Boolean = OFF

    #: An Int specifying that feature parameters have been modified but that the part has not
    #: been regenerated. Possible values are 0 and 1.
    isOutOfDate: int | None = None

    #: A Float specifying when the part was last modified.
    timeStamp: float | None = None

    #: A VertexArray object specifying all the vertices in the part.
    vertices: VertexArray = VertexArray([])

    #: An IgnoredVertexArray object specifying all the ignored vertices in the part.
    ignoredVertices: IgnoredVertexArray = IgnoredVertexArray()

    #: An EdgeArray object specifying all the edges in the part.
    edges: EdgeArray = EdgeArray([])

    #: An IgnoredEdgeArray object specifying all the ignored edges in the part.
    ignoredEdges: IgnoredEdgeArray = IgnoredEdgeArray()

    #: A FaceArray object specifying all the faces in the part.
    faces: FaceArray = FaceArray([])

    #: A CellArray object specifying all the cells in the part.
    cells: CellArray = CellArray([])

    #: A repository of Feature objects specifying all the features in the part.
    features: dict[str, PartFeature] = {}

    #: A repository of Feature objects specifying all Feature objects in the part. The Feature
    #: objects in the featuresById repository are the same as the Feature objects in the
    #: features' repository. However, the key to the objects in the featuresById repository is
    #: an integer specifying the **ID**, whereas the key to the objects in the features
    #: repository is a string specifying the **name**.
    featuresById: dict[str, PartFeature] = {}

    #: A repository of Datum objects specifying all the datums in the part.
    datums: list[Datum] = []

    #: A MeshElementArray object specifying all the elements in the part.
    elements: MeshElementArray = MeshElementArray([])

    #: A repository of MeshFace objects specifying all the element faces in the part. For a
    #: given element and a given face index within that element, the corresponding MeshFace
    #: object can be retrieved from the repository by using the key calculated as (i*8 + j),
    #: where i and j are zero-based element and face indices, respectively.
    elemFaces: dict[str, MeshFace] = {}

    #: A MeshFaceArray object specifying all the unique element faces in the part.
    elementFaces: MeshFaceArray = MeshFaceArray([])

    #: A MeshNodeArray object specifying all the nodes in the part.
    nodes: MeshNodeArray = MeshNodeArray([])

    #: A MeshNodeArray object specifying all the retained nodes in the substructure part.
    retainedNodes: MeshNodeArray = MeshNodeArray([])

    #: A repository of Set objects specifying for more information, see Set.
    sets: dict[str, Set] = {}

    #: A repository of Set objects specifying the contents of the **allSets** repository is the
    #: same as the contents of the **sets** repository.
    allSets: dict[str, Set] = {}

    #: A repository of Set objects specifying picked regions.
    allInternalSets: dict[str, Set] = {}

    #: A repository of Surface objects specifying for more information, see Surface.
    surfaces: dict[str, Surface] = {}

    #: A repository of Surface objects specifying the contents of the **allSurfaces** repository
    #: is the same as the contents of the **surfaces** repository.
    allSurfaces: dict[str, Surface] = {}

    #: A repository of Surface objects specifying picked regions.
    allInternalSurfaces: dict[str, Surface] = {}

    #: A repository of Skin objects specifying the skins created on the part.
    skins: dict[str, Skin] = {}

    #: A repository of Stringer objects specifying the stringers created on the part.
    stringers: dict[str, Stringer] = {}

    #: A repository of ReferencePoint objects.
    referencePoints: ReferencePoints = ReferencePoints()

    #: An EngineeringFeature object.
    engineeringFeatures: EngineeringFeature = EngineeringFeature()

    #: A SectionAssignmentArray object.
    sectionAssignments: SectionAssignmentArray = []

    #: A MaterialOrientationArray object.
    materialOrientations: MaterialOrientationArray = []

    #: A repository of CompositeLayup objects.
    compositeLayups: dict[str, CompositeLayup] = {}

    #: A repository of MeshEdge objects specifying all the element edges in the part. For a
    #: given element and a given edge index on a given face within that element, the
    #: corresponding MeshEdge object can be retrieved from the repository by using the key
    #: calculated as (i*32 + j*4 + k), where i, j, and k are zero-based element, face, and edge
    #: indices, respectively.
    elemEdges: dict[str, MeshEdge] = {}

    #: A MeshEdgeArray object specifying all the unique element edges in the part.
    elementEdges: MeshEdgeArray = MeshEdgeArray([])

    @overload
    @abaqus_method_doc
    def __init__(
        self,
        name: str,
        dimensionality: SymbolicConstant,
        type: SymbolicConstant,
        twist: Boolean = OFF,
    ):
        """This method creates a Part object and places it in the parts repository.

        .. note::
            This function can be accessed by::

                mdb.models[name].Part

        Parameters
        ----------
        name
            A String specifying the repository key.
        dimensionality
            A SymbolicConstant specifying the dimensionality of the part. Possible values are
            THREE_D, TWO_D_PLANAR, and AXISYMMETRIC.
        type
            A SymbolicConstant specifying the type of the part. Possible values are DEFORMABLE_BODY,
            EULERIAN, DISCRETE_RIGID_SURFACE, and ANALYTIC_RIGID_SURFACE.
        twist
            A Boolean specifying whether to include a twist DEGREE OF FREEDOM in the part (only
            available when **dimensionality** = AXISYMMETRIC and **type** = DEFORMABLE_BODY). The default
            value is OFF.

        Returns
        -------
        part: Part
            A Part object
        """
        ...

    @overload
    @abaqus_method_doc
    def __init__(
        self,
        name: str,
        objectToCopy: str,
        scale: float = 1,
        mirrorPlane: SymbolicConstant = NONE,
        compressFeatureList: Boolean = OFF,
        separate: Boolean = OFF,
    ):
        """This method copies a Part object and places the copy in the parts repository.

        .. note::
            This function can be accessed by::

                mdb.models[name].Part

        Parameters
        ----------
        name
            A String specifying the repository key.
        objectToCopy
            A Part Object to be copied.
        scale
            A Float specifying the scaling factor to apply to the imported geometric entities during
            copy. If a scale is specified, **compressFeatureList** will be set to ON, regardless of
            whether it is specified in the command. The default value is 1.
        mirrorPlane
            A SymbolicConstant specifying how the part is to be mirrored during copy. Possible
            values are XYPLANE, XZPLANE, YZPLANE. If a mirror plane is specified,
            **compressFeatureList** will be set to ON, regardless of whether it is specified in the
            command. The default value is NONE.
        compressFeatureList
            A Boolean specifying whether to compress the feature list when copying a Part object.
            The default value is OFF. If **mirrorPlane** or **scale** is specified, this argument is
            ignored.When you compress the feature, list the resulting part will have a single
            feature. Any datums or sets in the original part will be lost.
        separate
            A Boolean specifying whether to separate disconnected regions into parts. The default
            value is OFF.

        Returns
        -------
        part: Part
            A Part object
        """
        ...

    @abaqus_method_doc
    def __init__(self, *args, **kwargs): ...

    def PartFromBooleanCut(self, name: str, instanceToBeCut: str, cuttingInstances: Sequence[PartInstance]):
        """This method creates a Part in the parts repository after subtracting or cutting the geometries of a
        group of part instances from that of a base part instance.

        .. note::
            This function can be accessed by::

                mdb.models[name].PartFromBooleanCut

        Parameters
        ----------
        name
            A String specifying the repository key.
        instanceToBeCut
            A PartInstance specifying the base instance from which to cut other instances.
        cuttingInstances
            A sequence of PartInstance objects specifying the instances with which to cut the base
            instance.

        Returns
        -------
        part: Part
            A Part object
        """
        ...

    @abaqus_method_doc
    def PartFromBooleanMerge(
        self,
        name: str,
        instances: Sequence[PartInstance],
        keepIntersections: Boolean = False,
        mergeNodes: Literal[C.ALL, C.BOUNDARY_ONLY, C.NONE] = BOUNDARY_ONLY,
        nodeMergingTolerance: float | None = None,
        removeDuplicateElements: Boolean = ON,
        domain: Literal[C.MESH, C.BOTH, C.GEOMETRY] = GEOMETRY,
    ):
        """This method creates a Part in the parts repository after merging two or more part instances. The part
        instances can be either Abaqus native parts or orphan mesh parts, but they cannot be a combination of
        both.

        .. note::
            This function can be accessed by::

                mdb.models[name].PartFromBooleanMerge

        Parameters
        ----------
        name
            A String specifying the repository key.
        instances
            A sequence of PartInstance objects specifying the part instances to merge.
        keepIntersections
            A Boolean specifying whether the boundary intersections of Abaqus native part instances
            should be retained after the merge operation. The default value is False.
        mergeNodes
            A SymbolicConstant specifying whether the nodes of orphan mesh part instances should be
            retained after the merge operation. Possible values are BOUNDARY_ONLY, ALL, or NONE. The
            default value is BOUNDARY_ONLY.
        nodeMergingTolerance
            A Float specifying the maximum distance between nodes of orphan mesh part instances that
            will be merged and replaced with a single new node. The location of the new node is the
            average position of the deleted nodes. The default value is 10⁻⁶.
        removeDuplicateElements
            A Boolean specifying whether elements with the same connectivity after the merge will
            merged into a single element. The default value is ON.
        domain
            A SymbolicConstant specifying whether the part instances being merged are geometric
            instances or mesh instances. Possible values are GEOMETRY, MESH or BOTH. The default
            value is GEOMETRY.

        Returns
        -------
        part: Part
            A Part object
        """
        ...

    @abaqus_method_doc
    def PartFromExtrude2DMesh(self, name: str, part: "PartBase", depth: float, elementSize: float):
        """This method creates a Part object by extruding an existing two-dimensional orphan mesh Part object in
        the positive **Z** direction and places it in the parts repository.

        .. note::
            This function can be accessed by::

                mdb.models[name].PartFromExtrude2DMesh

        Parameters
        ----------
        name
            A String specifying the repository key.
        part
            A Part object specifying an existing two-dimensional orphan mesh Part object.
        depth
            A Float specifying the total extrusion distance.
        elementSize
            A Float specifying an approximate element length in the extruded direction.

        Returns
        -------
        part: Part
            A Part object

            - If the specified part is not an orphan mesh part:
              Cannot extrude a geometric part.
            - If the specified part is not two-dimensional:
              Cannot extrude a 3D part.
            - If the specified part is a rigid body:
              Cannot change dimension of a rigid body.
        """
        ...

    @abaqus_method_doc
    def PartFromGeometryFile(
        self,
        name: str,
        geometryFile: AcisFile,
        dimensionality: Literal[C.THREE_D, C.AXISYMMETRIC, C.TWO_D_PLANAR],
        type: Literal[C.EULERIAN, C.DISCRETE_RIGID_SURFACE, C.DEFORMABLE_BODY, C.ANALYTIC_RIGID_SURFACE],
        bodyNum: int = 1,
        combine: Boolean = False,
        booleanSolids: Boolean = FALSE,
        retainBoundary: Boolean = FALSE,
        usePartNameFromFile: Boolean = OFF,
        stitchTolerance: float = 1,
        twist: Boolean = OFF,
        scale: float = 1,
        convertToAnalytical: int = 0,
        convertToPrecise: int = 0,
    ):
        """This method creates a Part object and places it in the parts repository.

        .. note::
            This function can be accessed by::

                mdb.models[name].PartFromGeometryFile

        Parameters
        ----------
        name
            A String specifying the repository key.
        geometryFile
            An AcisFile object specifying a file containing geometry.
        dimensionality
            A SymbolicConstant specifying the dimensionality of the part. Possible values are
            THREE_D, TWO_D_PLANAR, and AXISYMMETRIC.
        type
            A SymbolicConstant specifying the type of the part. Possible values are DEFORMABLE_BODY,
            EULERIAN, DISCRETE_RIGID_SURFACE, and ANALYTIC_RIGID_SURFACE.
        bodyNum
            An Int specifying the desired body to be selected from an ACIS object containing a list
            of **N** ACIS bodies. Possible values are 1 ≤ **bodyNum** ≤ **N**. The default value is 1.
        combine
            A Boolean specifying weather to create a single part by combining all the bodies in the
            ACIS object. This argument is ignored if **bodyNum** is specified. The default value is
            False.
        booleanSolids
            A Boolean specifying whether the solids should be boolean while combining all the
            bodies.The default value is FALSE.
        retainBoundary
            A Boolean specifying whether the intersecting boundaries should be retained while
            boolean the solids.The default value is FALSE.
        usePartNameFromFile
            A Boolean specifying whether the part names specified in a STEP file should be used as
            the names in the Abaqus model database. If this option is TRUE, the part names in the
            STEP file will be used; if FALSE, each imported part will be named using the text of the
            **name** argument followed by a number. This functionality is available only for import
            from STEP files; for import from all other types of files this option should be FALSE.
        stitchTolerance
            A Float indicating the maximum gap to be stitched. The value should be smaller than the
            minimum feature size and bigger than the maximum gap expected to be stitched in the
            model. Otherwise this command may remove small (sliver) edges that are smaller than the
            tolerance. The default value is 1.0
        twist
            A Boolean specifying whether to include a twist DEGREE OF FREEDOM in the part (only
            available when **dimensionality** = AXISYMMETRIC and **type** = DEFORMABLE_BODY). The default
            value is OFF.
        scale
            A Float specifying the scaling factor to apply to the imported geometric entities. The
            default value is 1.0.
        convertToAnalytical
            An Int specifying whether to convert to analytical entities. Possible values are 0 or 1.
            The default value is 0. If **convertToAnalytical** = 1, all the numerical entities, such as
            splines, are converted to analytical entities, such as arcs and lines, during the repair
            phase of the command.
        convertToPrecise
            An Int specifying whether to convert to precise geometry. Possible value are 0 or 1. The
            default value is 0. If **convertToPrecise** = 1, the application will attempt to re-evaluate
            the tolerant entities to be more precise.

        Returns
        -------
        part: Part
            A Part object

        Raises
        ------
        PartError
            If the ACIS file is corrupt
        PartError
            the file is corrupt, If the dimensionality does not correspond to what is found in the ACIS file
        PartError
            type does not match the contents of the file, dimensionality does not match the contents of the file,
            If the type does not correspond to what is found in the ACIS file
        """
        ...

    @abaqus_method_doc
    def PartFromInstanceMesh(
        self,
        name: str,
        partInstances: Sequence[PartInstance] = (),
        copyPartSets: Boolean = False,
        copyAssemblySets: Boolean = False,
    ):
        """This method creates a Part object containing the mesh found in the supplied PartInstance objects and
        places the new Part object in the parts repository.

        .. note::
            This function can be accessed by::

                mdb.models[name].PartFromInstanceMesh

        Parameters
        ----------
        name
            A String specifying the repository key.
        partInstances
            A sequence of PartInstance objects to be used in the creation of the new mesh part. If
            the **partInstances** argument is omitted, the new Part object contains the mesh of all
            the part instances in the assembly.
        copyPartSets
            A Boolean specifying whether to copy sets, surfaces, and attributes from the base part
            or parts of the specified part instances to the new part. The default is False.
        copyAssemblySets
            A Boolean specifying whether to copy assembly-level sets that reference entities of the
            specified part instances to the new part. The default is False.

        Returns
        -------
        part: Part
            A Part object

            - If the analysis type (deformable or rigid) is not consistent among the supplied part
              instances:
              The selected part instances do not have a consistent analysis type.
            - If the assembly does not contain a mesh:
              The current assembly does not contain a mesh for a mesh part.
            - If the specified part instances do not contain a mesh:
              The selected part instances do not have a mesh for a mesh part.
        """
        ...

    @abaqus_method_doc
    def PartFromMesh(self, name: str, copySets: Boolean = False):
        """This method creates a Part object containing the mesh found in the part and places the new Part
        object in the parts repository.

        .. note::
            This function can be accessed by::

                mdb.models[name].PartFromMesh

        Parameters
        ----------
        name
            A String specifying the repository key.
        copySets
            A Boolean specifying whether to copy sets, surfaces, and attributes to the new part. The
            default is False.

        Returns
        -------
        part: Part
            A Part object

            - If the part does not contain a mesh:
              The current part does not contain a mesh for a mesh part.
        """
        ...

    @abaqus_method_doc
    def PartFromMeshMirror(self, name: str, part: "PartBase", point1: tuple, point2: tuple):
        """This method creates a Part object by mirroring an existing orphan mesh Part object about
        a specified plane and places it in the parts repository. The result is a union of the
        original and the mirrored copy. Contrast the PartFromMeshMirror method with the
        **mirrorPlane** argument of the Part copy constructor. The **mirrorPlane** argument creates
        only the second half of the part but does not unite the two halves.

        .. note::
            This function can be accessed by::

                mdb.models[name].PartFromMeshMirror

        Parameters
        ----------
        name
            A String specifying the repository key.
        part
            A Part object specifying an existing orphan mesh part.
        point1
            A sequence of three Floats specifying a point on the mirror plane. This point is the
            local origin in the local system of the plane.
        point2
            A sequence of three Floats specifying a point in the direction of the normal to the
            mirror plane. This point must not be coincident with **point1**.

        Returns
        -------
        part: Part
            A Part object

            - If the specified part is not an orphan mesh part:
              Cannot mirror a geometric part.
            - If the specified part is a rigid body:
              Cannot mirror a rigid body.
            - If **point1** and **point2** are coincident:
              Mirror plane director has zero length.
            - If the specified part is two-dimensional and the plane is not parallel to the
              **Z** axis:
              Mirror plane must be parallel to Z axis for 2D parts
        """
        ...

    @abaqus_method_doc
    def PartFromNodesAndElements(
        self,
        name: str,
        dimensionality: Literal[C.THREE_D, C.AXISYMMETRIC, C.TWO_D_PLANAR],
        type: Literal[C.EULERIAN, C.DISCRETE_RIGID_SURFACE, C.DEFORMABLE_BODY, C.ANALYTIC_RIGID_SURFACE],
        nodes: tuple,
        elements: tuple,
        twist: Boolean = OFF,
    ):
        """This method creates a Part object from nodes and elements and places it in the parts repository.

        .. note::
            This function can be accessed by::

                mdb.models[name].PartFromNodesAndElements

        Parameters
        ----------
        name
            A String specifying the repository key.
        dimensionality
            A SymbolicConstant specifying the dimensionality of the part. Possible values are
            THREE_D, TWO_D_PLANAR, and AXISYMMETRIC.
        type
            A SymbolicConstant specifying the type of the part. Possible values are DEFORMABLE_BODY,
            EULERIAN, DISCRETE_RIGID_SURFACE, and ANALYTIC_RIGID_SURFACE.
        nodes
            A sequence of (*nodeLabels*, **nodeCoords**) specifying the nodes of the mesh.
            **nodeLabels** is a sequence of Ints specifying the node labels, and **nodeCoords** is a
            sequence of sequences of three Floats specifying the nodal coordinates.
        elements
            A sequence of sequences of(*meshType*, **elementLabels**, **elementConns**) specifying the
            elements of the mesh. **meshType** is a String specifying the element type.
            **elementlabels** is a sequence of Ints specifying the element labels. **elementConns** is a
            sequence of sequences of node labels specifying the element connectivity.
        twist
            A boolean specifying whether the part is defined with twist. This option has meaning
            only when **dimensionality** = AXISYMMETRIC. Possible values are ON and OFF. The default
            value is OFF.

        Returns
        -------
        part: Part
            A Part object
        """
        ...

    @abaqus_method_doc
    def PartFromOdb(
        self,
        name: str,
        odb: str,
        fileName: str = "",
        instance: str = "",
        elementSet: str = "",
        shape: Literal[C.DEFORMED, C.UNDEFORMED] = UNDEFORMED,
        step: int | None = None,
        frame: int | None = None,
        twist: Boolean = OFF,
    ):
        """This method creates an orphan mesh Part object by reading an output database. The new part is placed
        in the parts repository.

        .. note::
            This function can be accessed by::

                mdb.models[name].PartFromOdb

        Parameters
        ----------
        name
            A String specifying the repository key.
        odb
            An output database object.
        fileName
            A String specifying the name of the output database file from which to create the part.
            The default value is an empty string.
        instance
            A String specifying the part instance in the output database from which to create the
            part. If no instance name is specified, Abaqus creates an orphan mesh part from the
            first part instance in the output database.
        elementSet
            A String specifying an element set defined on the output database. Only elements from
            this set will be imported. The default is to import all element sets.
        shape
            A SymbolicConstant specifying the configuration state. Possible values are UNDEFORMED
            and DEFORMED. The default value is UNDEFORMED.
        step
            An Int specifying the step number for reading deformed coordinates. 0≤step≤N−10≤step≤N-1
            where NN is the number of available steps. The default value is the last available step.
            You should specify the **step** argument only when **shape** = DEFORMED.
        frame
            An Int specifying the frame number for reading deformed coordinates.
            0≤frame≤N−10≤frame≤N-1 where NN is the number of available frames. The default value is
            the last available frame. You should specify the **frame** argument only when
            **shape** = DEFORMED.
        twist
            A Boolean specifying whether to include a twist DEGREE OF FREEDOM in the part (only
            available when **dimensionality** = AXISYMMETRIC and **type** = DEFORMABLE_BODY). The default
            value is OFF.

        Returns
        -------
        part: Part
            A Part object

        Raises
        ------
        PartError
            If the output database contains elements of more than one dimensionality or type:
            File contains both axisymmetric and nonaxisymmetric elements.File contains both 2D and
            3D elements.File contains both rigid and deformable elements.
            If more than one part is found on the output database:
        Error
            File does not contain any valid frames.
            importing of more than one part is not currently supported, - If the output database does not contain any valid results for the specified step:
        Error
            Specified frame does not contain nodal displacements.
            If the specified step and frame do not contain any displacements:
        Error
            Specified element set is not defined in the ODB.
            If the specified element set is not found on the output database:
        OdiError
            Invalid step index: i. Available step indices: 0 - j.
            If the step number is invalid:
        OdiError
            Invalid frame index: i. Available frame indices: 0 - j.
            If the frame number is invalid:
        """
        ...

    @abaqus_method_doc
    def PartFromSection3DMeshByPlane(self, name: str, part: "PartBase", point1: float, point2: float, point3: tuple):
        """This method creates a Part object by cutting an existing three-dimensional orphan mesh Part object by
        a plane and places it in the parts repository. This method is valid only for orphan mesh parts composed
        of 8-node brick elements.

        .. note::
            This function can be accessed by::

                mdb.models[name].PartFromSection3DMeshByPlane

        Parameters
        ----------
        name
            A String specifying the repository key.
        part
            A Part object specifying an existing three-dimensional orphan mesh part.
        point1
            A Sequence of three Floats specifying a point on the cutting plane. This point is the
            local origin in the local system of the plane.
        point2
            A Sequence of three Floats specifying a point in the direction of the normal to the
            cutting plane. This point must not be coincident with **point1**.
        point3
            A sequence of three Floats specifying the direction of the local 1-axis in the local
            system of the plane. This point must not project onto **point1**.

        Returns
        -------
        part: Part
            A Part object

        Raises
        ------
        Exception
            If the specified part is not an orphan mesh part,
            Cannot reduce dimension of a geometric part.
        Exception
            If the specified part is not three-dimensional,
            Cannot reduce dimension of a 2D part.
        Exception
            If the specified part is a rigid body,
            Cannot change dimension of a rigid body.
        Exception
            If **point1** and **point2** are coincident,
            Cutting plane director has zero length.
        Exception
            If **point3** projects onto **point1**,
            Local axis point projects to origin.
        Exception
            If no elements are cut by the specified plane,
            Cannot reduce part dimension.
        """
        ...

    @abaqus_method_doc
    def PartFromSubstructure(self, name: str, substructureFile: str, odbFile: str):
        """This method creates a substructure Part object by reading a substructure sim file and places it in
        the parts repository.

        .. note::
            This function can be accessed by::

                mdb.models[name].PartFromSubstructure

        Parameters
        ----------
        name
            A String specifying the repository key.
        substructureFile
            A substructure sim file.
        odbFile
            The output database file corresponding to the substructure sim file.

        Returns
        -------
        part: Part
            A Part object

        Raises
        ------
        Exception
            If the specified part is not a substructure,
            File specified does not contain a substructure.
        Exception
            If the specified part already exists,
            A part with the same name already exists.
        Exception
            If the substructure cannot be imported,
            The output database is missing nodes and elements.Nested substructures are not
            supported.The substructure sim file was generated using a version that is different from
            the current version.
        """
        ...

    @abaqus_method_doc
    def Part2DGeomFrom2DMesh(
        self,
        name: str,
        part: "PartBase",
        featureAngle: float,
        splineCurvatureLimit: float = 90,
        twist: Boolean = OFF,
    ):
        """This method creates a geometric Part object from the outline of an existing two-dimensional orphan
        mesh Part object and places it in the parts repository. If the Part2DGeomFrom2DMesh method cannot create
        a valid two-dimensional shell section from the two-dimensional mesh, the method fails and creates an
        empty geometry part with a failed base shell feature.

        .. note::
            This function can be accessed by::

                mdb.models[name].Part2DGeomFrom2DMesh

        Parameters
        ----------
        name
            A String specifying the repository key.
        part
            A Part object specifying an existing two-dimensional orphan mesh Part object.
        featureAngle
            A Float specifying the angle (in degrees) between line segments that triggers a break in
            the geometry.
        splineCurvatureLimit
            A Float specifying the traversal angle in degrees of the spline that triggers a break in
            the geometry. The default value is 90.
        twist
            A Boolean specifying whether to include a twist DEGREE OF FREEDOM in the part (only
            available when **dimensionality** = AXISYMMETRIC and **type** = DEFORMABLE_BODY). The default
            value is OFF.

        Returns
        -------
        part: Part
            A Part object

            - If the specified part is not an orphan mesh part:
              Specified part must be an orphan mesh.
            - If the Part2DGeomFrom2DMesh method cannot create a valid two-dimensional shell section from the two-dimensional mesh:
              Planar shell feature failed
            - If the specified part is not two-dimensional:
              Cannot create a geometry from a 3D part.
            - If the specified part is a rigid body:
              Cannot create a geometry from a rigid body.
        """
        ...

    @abaqus_method_doc
    def setValues(self, *args, **kwargs):
        """This method modifies the Part object.

        Raises
        ------
        RangeError
        """
        ...

    @abaqus_method_doc
    def addGeomToSketch(self, sketch: ConstrainedSketch):
        """This method converts a part into a sketch by projecting all of the edges of the part onto the X-Y
        plane of the sketch. You can use addGeomToSketch with a part of any modeling space.

        Parameters
        ----------
        sketch
            A ConstrainedSketch object.
        """
        ...

    @abaqus_method_doc
    def assignThickness(
        self,
        faces: Sequence[Face],
        thickness: float | None = None,
        topFaces: Sequence[Face] = (),
        bottomFaces: Sequence[Face] = (),
    ):
        """This method assigns thickness data to shell faces. The thickness can be used while assigning shell
        and membrane sections to faces.

        Parameters
        ----------
        faces
            A sequence of Face objects specifying the regions where thickness will be applied.
        thickness
            A Float specifying the thickness along the given **faces** . Either **thickness**,
            **topFaces**, or **bottomFaces** must be specified.
        topFaces
            A sequence of Face objects whose distance to **faces** argument is used to calculate the
            thickness along the **faces**. The combination of **topFaces** and **bottomFaces** determines
            the thickness and the offset of the elements. If **bottomFaces** is not specified then the
            thickness is twice the distance to the **topFaces**. This argument will be ignored if
            **thickness** is specified. Either **thickness**, **topFaces**, or **bottomFaces** must be
            specified.
        bottomFaces
            A sequence of Face objects whose distance to **faces** is used to calculate the thickness
            along the **faces**. The combination of **topFaces** and **bottomFaces** determines the
            thickness and the offset of the elements. If **topFaces** is not specified then the
            thickness is twice the distance to the **bottomFaces**. This argument will be ignored if
            **thickness** is specified. Either **thickness**, **topFaces**, or **bottomFaces** must be
            specified.
        """
        ...

    @abaqus_method_doc
    def backup(self):
        """This method makes a backup copy of the features in the part.

        Use the restore method to retrieve the part's features from the backup.
        """
        ...

    @abaqus_method_doc
    def checkGeometry(
        self,
        detailed: Boolean = OFF,
        reportFacetErrors: Boolean = OFF,
        level: int | None = None,
    ):
        """This method checks the validity of the geometry of the part and prints a count of all topological
        entities on the part (faces, edges, vertices, etc.).

        Parameters
        ----------
        detailed
            A Boolean specifying whether detailed output will be printed to the replay file. The
            default value is OFF.
        reportFacetErrors
            A Boolean specifying whether faces are checked for proper facetting. The default value
            is OFF.
        level
            An Int specifying which level of checking is performed. Values can range from 20 to 70,
            with higher values reporting less and less important errors. The default value is 20,
            which reports all critical errors. When the default value is used, the stored validity
            status is updated to agree with the result of this check.
        """
        ...

    @abaqus_method_doc
    def clearGeometryCache(self):
        """This method clears the geometry cache.

        Clearing the geometry cache reduces the amount of memory being used to cache part features.
        """
        ...

    @abaqus_method_doc
    def deleteAllFeatures(self):
        """This method deletes all the features in the part."""
        ...

    @abaqus_method_doc
    def deleteFeatures(self, featureNames: tuple):
        """This method deletes the given features.

        Parameters
        ----------
        featureNames
            A sequence of Strings specifying the feature names that will be deleted from the part.
        """
        ...

    @abaqus_method_doc
    def getAngle(self, plane1: str, plane2: str, line1: str, line2: str, commonVertex: str = ""):
        """This method returns the angle between the specified entities.

        Parameters
        ----------
        plane1
            A Face, MeshFace, or a Datum object specifying the first plane. The Datum object must
            represent a datum plane. The **plane1** and **line1** arguments are mutually exclusive. One
            of them must be specified.
        plane2
            A Face, MeshFace, or a Datum object specifying the second plane. The Datum object must
            represent a datum plane. The **plane2** and **line2** arguments are mutually exclusive. One
            of them must be specified.
        line1
            An Edge, MeshEdge, or a Datum object specifying the first curve. The Datum object must
            represent a datum axis. The **plane1** and **line1** arguments are mutually exclusive. One
            of them must be specified.
        line2
            An Edge, MeshEdge, or a Datum object specifying the second curve. The Datum object must
            represent a datum axis. The **plane2** and **line2** arguments are mutually exclusive. One
            of them must be specified.
        commonVertex
            If the two selected Edge objects have more than one vertex in common, this ConstrainedSketchVertex object
            specifies the vertex at which to evaluate the angle.

        Returns
        -------
        angle: float
            A Float specifying the angle between the specified entities. If you provide a plane as
            an argument, Abaqus/CAE computes the angle using the normal to the plane.
        """
        ...

    @abaqus_method_doc
    def getArea(self, faces: Sequence[Face], relativeAccuracy: float = 0):
        """This method returns the total surface area of a given face or group of faces.

        Parameters
        ----------
        faces
            A sequence of Face objects whose area the method will calculate.
        relativeAccuracy
            A Float specifying that the area computation should stop when the specified relative
            accuracy has been achieved. The default value is 0.000001 (0.0001%).

        Returns
        -------
        area: float
            A Float specifying the sum of the calculated areas of the given faces.
        """
        ...

    @abaqus_method_doc
    def getAssociatedCADPaths(self):
        """This method returns the paths to the associated CAD part and root file. These are only available if
        the part was imported from one of the supported CAD softwares using the Associative Import capability.
        The root file can be the assembly file or the part file, depending on what which one was imported.

        Returns
        -------
        paths: tuple
            A sequence containing the path to the associated CAD part and assembly file
        """
        ...

    @abaqus_method_doc
    def getCADParameters(self):
        """This method returns the names and values of the CAD parameters associated with the part. These are
        only available if the part was imported from one of the supported CAD softwares using the Associative
        Import capability, and if the parameter names defined in that CAD software are prefixed with the string
        ABQ.

        Returns
        -------
        paras: dict
            A dictionary object representing a map of the name of the parameter and its associated
            value.
        """
        ...

    @abaqus_method_doc
    def getCentroid(self, faces: Sequence[Face], cells: Sequence[Face], relativeAccuracy: float = 0):
        """Location of the centroid of a given face/cell or group of faces/cells.

        Parameters
        ----------
        faces
            A sequence of Face objects whose centroid the method will calculate. The arguments
            **faces** and **cells** are mutually exclusive.
        cells
            A sequence of Face objects whose centroid the method will calculate. The arguments
            **faces** and **cells** are mutually exclusive.
        relativeAccuracy
            A Float specifying that the centroid computation should stop when the specified relative
            accuracy has been achieved. The default value is 0.000001 (0.0001%).

        Returns
        -------
        centroid: Sequence[float]
            A sequence of Floats specifying the **X**, **Y**, and **Z** coordinates of the centroid.
            Depending on the arguments provided, this method returns the following:

            - The location of the centroid of a given face or group of faces.
            - The location of the centroid of a given cell or group of cells.
        """
        ...

    @abaqus_method_doc
    def getCoordinates(self, entity: str):
        """This method returns the coordinates of specified point.

        Parameters
        ----------
        entity
            A ConstrainedSketchVertex, Datum point, MeshNode, or ReferencePoint specifying the entity to query.

        Returns
        -------
        tuple[float, float, float]
            A tuple of 3 Floats representing the coordinates of the specified point.
        """
        ...

    @abaqus_method_doc
    def getCurvature(self, edges: Sequence[Edge], samplePoints: int = 100):
        """This method returns the maximum curvature of a given edge or group of edges. For an arc, the
        curvature is constant over the entire edge, and equal to the inverse of the radius. For a straight line,
        the curvature is constant and equal to 0. For a spline edge, the curvature varies over a range, and this
        methods computes the maximum.

        Parameters
        ----------
        edges
            A sequence of Edge objects whose curvature the method will calculate.
        samplePoints
            An Int specifying the number of points along each edge at which the curvature will be
            computed. The higher the number of sample points, the better the accuracy of the
            computation. The default value is 100.

        Returns
        -------
        curvature: float
            A Float specifying the maximum curvature.
        """
        ...

    @abaqus_method_doc
    def getDistance(self, entity1: str, entity2: str):
        """Depending on the arguments provided, this method returns one of the following:

        - The distance between two points.
        - The minimum distance between a point and an edge.
        - The minimum distance between two edges.

        Parameters
        ----------
        entity1
            A ConstrainedSketchVertex, Datum point, MeshNode, or Edge specifying the first entity from which to
            measure.
        entity2
            A ConstrainedSketchVertex, Datum point, MeshNode, or Edge specifying the second entity to which to
            measure.

        Returns
        -------
        distance: float
            A Float specifying the distance between **entity1** and **entity2**.
        """
        ...

    @abaqus_method_doc
    def getLength(self, edges: Sequence[Edge]):
        """This method returns the length of a given edge or group of edges.

        Parameters
        ----------
        edges
            A sequence of Edge objects whose total length the method will calculate.

        Returns
        -------
        length: float
            A Float specifying the total length
        """
        ...

    @abaqus_method_doc
    def getPerimeter(self, faces: Sequence[Face]):
        """This method returns the total perimeter of a given face or group of faces. All faces need to be on
        the same part. If the specified faces have shared edges, these edges are excluded from the computation,
        thus providing the length of the outer perimeter of the specified faces.

        Parameters
        ----------
        faces
            A sequence of Face objects whose perimeter the method will calculate.

        Returns
        -------
        perimeter: float
            A Float specifying the perimeter
        """
        ...

    @abaqus_method_doc
    def getVolume(self, cells: Sequence[Cell], relativeAccuracy: float = 0):
        """This method returns the volume area of a given cell or group of cells.

        Parameters
        ----------
        cells
            A sequence of Cell objects whose volume the method will calculate.
        relativeAccuracy
            A Float specifying the relative accuracy of the computation. The default value is
            0.000001 (0.0001%).

        Returns
        -------
        volume: float
            A Float specifying the sum of the areas of the given faces
        """
        ...

    @abaqus_method_doc
    def getMassProperties(
        self,
        regions: str = "",
        relativeAccuracy: Literal[C.LOW, C.MEDIUM, C.HIGH] = LOW,
        useMesh: Boolean = False,
        specifyDensity: Boolean = False,
        density: str = "",
        specifyThickness: Boolean = False,
        thickness: str = "",
        miAboutCenterOfMass: Boolean = True,
        miAboutPoint: tuple = (),
    ):
        """This method returns the mass properties of a part or region. Only beams, trusses, shells, solids,
        point, nonstructural mass, and rotary inertia elements are supported.

        Parameters
        ----------
        regions
            A MeshElementArray, CellArray, FaceArray, or EdgeArray specifying the regions whose mass
            properties are to be queried. The whole part is queried by default.
        relativeAccuracy
            A SymbolicConstant specifying the relative accuracy for geometry computation. Possible
            values are LOW, MEDIUM and HIGH. The default value is LOW.
        useMesh
            A Boolean specifying whether the mesh should be used in the computation if the geometry
            is meshed. The default value is False.
        specifyDensity
            A Boolean specifying whether a user-specified density should be used in regions with
            density errors such as undefined material density. The default value is False.
        density
            A double value specifying the user-specified density value to be used in regions with
            density errors. The user-specified density should be greater than 0.
        specifyThickness
            A Boolean specifying whether a user-specified thickness should be used in regions with
            thickness errors such as undefined thickness. The default value is False.
        thickness
            A double value specifying the user-specified thickness value to be used in regions with
            thickness errors. The user-specified thickness should be greater than 0.
        miAboutCenterOfMass
            A Boolean specifying if the moments of inertia should be evaluated about the center of
            mass. The default value is True.
        miAboutPoint
            A tuple of three floats specifying the coordinates of the point about which to evaluate
            the moment of inertia. By default if the moments of inertia are not being evaluated
            about the center of mass, they will be evaluated about the origin.

        Returns
        -------
        properties: dict
            A Dictionary object with the following items:

            - **area**: None or a Float specifying the sum of the area of the specified faces. The area
              is computed only for one side for shells.
            - **areaCentroid**: None or a tuple of three Floats representing the coordinates of the area
              centroid.
            - **volume**: None or a Float specifying the volume of the specified regions.
            - **volumeCentroid**: None or a tuple of three Floats representing the coordinates of the
              volume centroid.
            - **massFromMassPerUnitSurfaceArea**: None or a Float specifying the mass due to mass per
              unit surface area.
            - **mass**: None or a Float specifying the mass of the specified regions. It is the total
              mass and includes mass from quantities such as mass per unit surface area.
            - **centerOfMass**: None or a tuple of three Floats representing the coordinates of the
              center of mass.
            - **momentOfInertia**: None or a tuple of six Floats representing the moments of inertia
              about the center of mass or about the point specified.
            - **warnings**: A tuple of SymbolicConstants representing the problems encountered while
              computing the mass properties. Possible SymbolicConstants are:

            - UNSUPPORTED_ENTITIES: Some unsupported entities exist in the specified region. The mass
              properties are computed only for beams, trusses, shells, solids, point and
              non-structural mass elements and rotary inertia elements. The mass properties are not
              computed for axisymmetric elements, springs, connectors, gaskets or any other elements.
            - MISSING_THICKNESS: For some regions, the section definitions are missing thickness
              values.
            - ZERO_THICKNESS: For some regions, the section definitions have a zero thickness value.
            - VARIABLE_THICKNESS: The nodal thickness or field thickness specified for some regions
              has been ignored.
            - NON_APPLICABLE_THICKNESS: For some regions, the thickness value is not applicable to the
              corresponding sections specified on the regions.
            - MISSING_DENSITY: For some regions, the section definitions are missing material density
              values.
            - MISSING_MATERIAL_DEFINITION: For some regions, the material definition is missing.
            - ZERO_DENSITY: For some regions, the section definitions have a zero material density
              value.
            - UNSUPPORTED_DENSITY: For some regions, either a negative material density or a
              temperature dependent density has been specified, or the material value is missing for
              one or more plies in the composite section.
            - SHELL_OFFSETS: For shells, this method does not account for any offsets specified.
            - MISSING_SECTION_DEFINITION: For some regions, the section definition is missing.
            - UNSUPPORTED_SECTION_DEFINITION: The section definition provided for some regions is not
              supported.
            - REINFORCEMENTS: This method does not account for any reinforcements specified on the
              model.
            - SMEARED_PROPERTIES: For regions with composite section assignments, the density is
              smeared across the thickness. The volume centroid and center of mass computations for a
              composite shell use a lumped mass approach where the volume and mass is assumed to be
              lumped in the plane of the shell. As a result of these approximations the volume
              centroid, center of mass and moments of inertia may be slightly inaccurate for regions
              with composite section assignments.
            - UNSUPPORTED_NON_STRUCTURAL_MASS_ENTITIES: This method does not account for any
              non-structural mass on wires.
            - INCORRECT_MOMENT_OF_INERTIA: For geometry regions with non-structural mass per volume,
              the non-structural mass is assumed to be a point mass at the centroid of the regions.
              Thus, the moments of inertia may be inaccurate as the distribution of the non-structural
              mass is not accounted for. Use the mesh for accurately computing the moments of inertia.
            - MISSING_BEAM_ORIENTATIONS: For some regions with beam section assignments, the beam
              section orientations are missing.
            - UNSUPPORTED_BEAM_PROFILES: This method supports the Box, Pipe, Circular, Rectangular,
              Hexagonal, Trapezoidal, I, L, T, Arbitrary, and Tapered beam profiles. Any other beam
              profile is not supported.
            - TAPERED_BEAM_MI: Moment of inertia calculations for tapered beams are not accurate.
            - SUBSTRUCTURE_INCORRECT_PROPERTIES: The user assigned density and thickness is not
              considered for substructures.
            - UNSUPPORTED_NON_STRUCTURAL_MASS_PROPORTIONAL: Non-structural mass with Mass Proportional
              distribution is not supported. Results are computed using Volume Proportional
              distribution.
        """
        ...

    @abaqus_method_doc
    def getFeatureFaces(self, name: str):
        """This method returns a sequence of Face objects that are created by the given feature.

        Parameters
        ----------
        name
            A string specifying the feature name.

        Returns
        -------
        faces: Sequence[Face]
            Sequence of Face objects.

        Raises
        ------
        Error
            Incorrect feature name,
            An exception occurs if a feature with the given name does not exist.
        """
        ...

    @abaqus_method_doc
    def getFeatureEdges(self, name: str):
        """This method returns a sequence of Edge objects that are created by the given feature.

        Parameters
        ----------
        name
            A string specifying the feature name.

        Returns
        -------
        edges: Sequence[Edge]
            Sequence of Edge objects.

        Raises
        ------
        Error
            Incorrect feature name, An exception occurs if a feature with the given name does not exist.
        """
        ...

    @abaqus_method_doc
    def getFeatureCells(self, name: str):
        """This method returns a sequence of Cell objects that are created by the given feature.

        Parameters
        ----------
        name
            A string specifying the feature name.

        Returns
        -------
        cells: Sequence[Cell]
            Sequence of Cell objects.

        Raises
        ------
        Error
            Incorrect feature name,
            An exception occurs if a feature with the given name does not exist.
        """
        ...

    @abaqus_method_doc
    def getFeatureVertices(self, name: str):
        """This method returns a sequence of ConstrainedSketchVertex objects that are created by the given
        feature.

        Parameters
        ----------
        name
            A string specifying the feature name.

        Returns
        -------
        vertices: Sequence[ConstrainedSketchVertex]
            Sequence of ConstrainedSketchVertex objects.

        Raises
        ------
        Error
            Incorrect feature name, An exception occurs if a feature with the given name does not exist.
        """
        ...

    @abaqus_method_doc
    def isAlignedWithSketch(self):
        """This method checks if the normal of an analytical rigid surface part is aligned with that of its
        sketch.

        Returns
        -------
        Boolean
            A Boolean value of True if the part is aligned with the sketch and False if it is not
            aligned.

        Raises
        ------
        AbaqusException
            Can only be used with analytical rigid parts, If the part is not an analytical rigid part.
        """
        ...

    @abaqus_method_doc
    def printAssignedSections(self):
        """This method prints information on each section that has been assigned to a region of the part."""
        ...

    @abaqus_method_doc
    def projectEdgesOntoSketch(self, sketch: str, edges: tuple, constrainToBackground: Boolean = True):
        """This method projects the selected edges of a part onto the specified ConstrainedSketch
        object. The edges appear as sketch geometry after projection. If the plane of projection
        is not parallel to the specified edge, the resultant sketch geometry may be of a
        different type. For example, a circular edge can be projected as an ellipse or a line
        depending on the angle of the plane of projection. By default, the projected edge will
        be constrained to the background geometry. You can remove this constraint by setting
        **constrainToBackground** to False.

        Parameters
        ----------
        sketch
            The ConstrainedSketch object on which the edges are projected.
        edges
            A sequence of candidate edges to be projected onto the sketch.
        constrainToBackground
            A Boolean that determines whether the projected edges need to constrained to the
            background geometry. The default is True.
        """
        ...

    @abaqus_method_doc
    def projectReferencesOntoSketch(
        self,
        sketch: ConstrainedSketch,
        filter: Literal[C.ALL_EDGES, C.COPLANAR_EDGES] = ALL_EDGES,
        upToFeature: PartFeature | None = None,
        edges: Sequence[Edge] = (),
        vertices: Sequence[Vertex] = (),
    ):
        """This method projects the vertices of specified edges, and datum points from the part onto the
        specified ConstrainedSketch object. The vertices and datum points appear on the sketch as reference
        geometry.

        Parameters
        ----------
        sketch
            The ConstrainedSketch object on which the edges, vertices, and datum points are
            projected.
        filter
            A SymbolicConstant specifying how to limit the amount of projection. Possible values are
            ALL_EDGES and COPLANAR_EDGES. If **filter** = COPLANAR_EDGES, edges that are coplanar to the
            sketching plane are the only candidates for projection. The default value is ALL_EDGES.
        upToFeature
            A Feature object specifying a marker in the feature-based history of the part.
            Abaqus/CAE projects onto the sketch only the part entities that were created before the
            feature specified by this marker. By default, part entities in features created before
            the sketch you are editing are candidates for projection.
        edges
            A sequence of candidate edges whose vertices need to be projected onto the sketch. By
            default, all edges specified by the **filter** argument are candidates for projection.
        vertices
            A sequence of candidate vertices to be projected onto the sketch. By default, all
            vertices are candidates for projection.
        """
        ...

    @abaqus_method_doc
    def queryAttributes(self, printResults: Boolean = OFF):
        """This method prints the following information about a part:

            - the name, modeling space, and analysis type; and
            - whether twist is included (only available when the modeling space is axisymmetric and
              the analysis type is deformable); and
            - the number of vertices, edges, faces and cells if applicable.

        Parameters
        ----------
        printResults
            A Boolean which specifies whether the above information is to be printed. The default
            value is True

        Returns
        -------
        attributes: dict
            A Dictionary object with string keys and integer values which returns the above
            information with the keys being numVertices, numEdges, numFaces, numCells,
            numWiredEdges, numShellFaces and numSolidFaces.
        """
        ...

    @abaqus_method_doc
    def queryCachedStates(self):
        """This method displays the position of geometric states relative to the sequence of features in the
        part cache.

        The output is displayed in the message area.
        """
        ...

    @abaqus_method_doc
    def queryGeometry(self, relativeAccuracy: float = 0, printResults: Boolean = True):
        """This method prints the following information about a part:

        - the name, modeling space, and analysis type;
        - whether twist is included (only available when the modeling space is axisymmetric and
          the analysis type is deformable);
        - a 3D point representing the minimum of the part's bounding box;
        - a 3D point representing the maximum of the part's bounding box;
        - a 3D point representing the part's centroid (only on 3D solid parts); and
        - the volume (only on 3D solid parts).

        Parameters
        ----------
        relativeAccuracy
            A Float specifying that the property computations should stop when the specified
            relative accuracy has been achieved. The default value is 0.000001 (0.0001%).
        printResults
            A Boolean which specifies whether the above information is to be printed. The default
            value is True.

        Returns
        -------
        geometry: dict
            A Dictionary object with string keys, which returns the above information with the keys
            being name, space, type, volume, centroid, category and boundingBox.
        """
        ...

    @abaqus_method_doc
    def queryRegionsMissingSections(self):
        """This method returns all regions in the part that do not have a section assignment but require one for
        analysis.

        Returns
        -------
        region: Region
            A Region object, or None
        """
        ...

    @abaqus_method_doc
    def queryDisjointPlyRegions(self):
        """This method provides a list of all composite plys in the current part which have disjoint regions."""
        ...

    @abaqus_method_doc
    def regenerate(self):
        """This method regenerates a part.

        When you modify features, it may be convenient to postpone regeneration until you make all your
        changes, since regeneration can be time consuming.
        """
        ...

    @abaqus_method_doc
    def regenerationWarnings(self):
        """This method prints any regeneration warnings associated with the features."""
        ...

    @abaqus_method_doc
    def removeInvalidGeometry(self):
        """Removes all invalid entities from the part, leaving a valid part.

        This is not recorded as a feature in the feature list, therefore it should be used on parts that
        have a single feature (such as an imported part). Note:This may remove valid entities that are
        connected to invalid ones. You can identify invalid entities using the query toolset before using
        this command.
        """
        ...

    @abaqus_method_doc
    def restore(self):
        """This method restores the parameters of all features in the assembly to the value they had before a
        failed regeneration.

        Use the restore method after a failed regeneration, followed by a regenerate command.
        """
        ...

    @abaqus_method_doc
    def resumeAllFeatures(self):
        """This method resumes all the suppressed features in the part."""
        ...

    @abaqus_method_doc
    def resumeFeatures(self, featureNames: tuple):
        """This method resumes the specified suppressed features in the part.

        Parameters
        ----------
        featureNames
            A tuple of names of features which are to be resumed.
        """
        ...

    @abaqus_method_doc
    def resumeLastSetFeatures(self):
        """This method resumes the last set of features to be suppressed in the part."""
        ...

    @abaqus_method_doc
    def saveGeometryCache(self):
        """This method caches the current geometry.

        Caching the current geometry improves regeneration performance.
        """
        ...

    @abaqus_method_doc
    def setAssociatedCADPaths(self, partFile: str = "", rootFile: str = ""):
        """This method sets the paths to the associated CAD part and root file. This method is only available if
        the part was imported from one of the supported CAD softwares using the Associative Import capability.
        The root file can be the assembly file or the part file, depending on the one that was imported. This
        method can be used to specify the new paths when the CAD data is moved to a different directory.

        Parameters
        ----------
        partFile
            A String specifying the name of the associated CAD part file.
        rootFile
            A String specifying the name of the root associated CAD file. This can be the same as
            the part file or can be the assembly file, depending on the one that was imported.
        """
        ...

    @abaqus_method_doc
    def suppressFeatures(self, featureNames: tuple):
        """This method suppresses the given features.

        Parameters
        ----------
        featureNames
            A tuple of names of features which are to be suppressed in the part.
        """
        ...

    @abaqus_method_doc
    def writeAcisFile(self, fileName: str, version: float | None = None):
        """This method exports the geometry of the part to a named file in ACIS format.

        Parameters
        ----------
        fileName
            A String specifying the name of the file to which to write.
        version
            A Float specifying the ACIS version. For example, the Float 12.0 corresponds to ACIS
            Version 12.0. The default value is the current version of ACIS.

        Raises
        ------
        Exception
            Cannot export orphan mesh parts to ACIS,
            If the part is an orphan mesh part.
        """
        ...

    @abaqus_method_doc
    def writeCADParameters(self, paramFile: str, modifiedParams: tuple = (), updatePaths: str = ""):
        """This method writes the parameters that were imported from the CAD system to a parameter file.

        Parameters
        ----------
        paramFile
            A String specifying the parameter file name.
        modifiedParams
            A tuple of tuples each containing the part name, the parameter name, and the modified
            parameter value. Default is an empty tuple.
        updatePaths
            A Bool specifying whether to update the path of the CAD model file specified in the
            **parameterFile** to the current directory, if the CAD model is present in the current
            directory.
        """
        ...

    @abaqus_method_doc
    def writeIgesFile(
        self, fileName: str, flavor: Literal[C.JAMA, C.IGES, C.SOLIDWORKS, C.STANDARD, C.AUTOCAD, C.MSBO]
    ):
        """This method exports the geometry of the part to a named file in IGES format.

        Parameters
        ----------
        fileName
            A String specifying the name of the file to which to write.
        flavor
            A SymbolicConstant specifying a particular flavor of IGES. Possible values are STANDARD,
            AUTOCAD, SOLIDWORKS, JAMA, and MSBO.

        Raises
        ------
        Exception
            Cannot export orphan mesh parts to IGES,
            If the part is an orphan mesh part.
        """
        ...

    @abaqus_method_doc
    def writeStepFile(self, fileName: str):
        """This method exports the geometry of the part to a named file in STEP format.

        Parameters
        ----------
        fileName
            A String specifying the name of the file to which to write.

        Raises
        ------
        Parterror
            Cannot export orphan mesh parts to STEP, If the part contains no geometry.
        """
        ...

    @abaqus_method_doc
    def writeVdaFile(self, fileName: str):
        """This method exports the geometry of the part to a named file in VDA-FS format.

        Parameters
        ----------
        fileName
            A String specifying the name of the file to which to write.

        Raises
        ------
        Exception
            Cannot export orphan mesh parts to VDA-FS If the part is an orphan mesh part.
        """
        ...

    @abaqus_method_doc
    def copyMeshPattern(
        self,
        elements: Sequence[MeshElement],
        faces: Sequence[Face],
        elemFaces: Sequence[MeshFace],
        targetFace: MeshFace,
        nodes: Sequence[MeshNode],
        coordinates: tuple,
    ):
        """This method copies a mesh pattern from a source region consisting of a set of shell elements or
        element faces onto a target face, mapping nodes and elements in a one-one correspondence between source
        and target.

        Parameters
        ----------
        elements
            A sequence of MeshElement objects or a Set object containing elements and specifying the
            source region.
        faces
            A sequence of Face objects that have associated with shell elements or element faces and
            specifying the source region.
        elemFaces
            A sequence of MeshFace objects specifying the source region.
        targetFace
            A MeshFace object specifying the target region.
        nodes
            A sequence of MeshNode objects or a Set object containing nodes on the boundary of
            source region which are to be positioned to the boundary of target face.
        coordinates
            A sequence of three-dimensional coordinate tuples specifying the coordinates for each of
            the given nodes. When specified, the number of coordinate tuples must match the number
            of given nodes, and be ordered to correspond to the given nodes in *ascending order*
            according to index. These coordinates are positions of the nodes of a mesh that will be
            the target face corresponding to nodes provided.
        """
        ...

    @abaqus_method_doc
    def smoothNodes(self, nodes: Sequence[MeshNode]):
        """This method smooths the given nodes of a native mesh, moving them locally to a more optimal location
        that improves the quality of the mesh.

        Parameters
        ----------
        nodes
            A sequence of MeshNode objects or a Set object containing nodes.
        """
        ...

    @abaqus_method_doc
    def Lock(self):
        """This method locks the part.

        Locking the part prevents any further changes to the part that can trigger regeneration of the part.
        """
        ...

    @abaqus_method_doc
    def Unlock(self):
        """This method unlocks the part.

        Unlocking the part allows it to be regenerated after any modifications to the part.
        """
        ...

    @abaqus_method_doc
    def LockForUpgrade(self):
        """This method locks the part for upgrade.

        Locking the part prevents any further changes to the part that can trigger regeneration of the part.
        When the part is unlocked, all the parts are upgraded and regenrated.
        """
        ...

haiiliin / abqpy / 9778506695

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous